製品詳細
RF Adapter, 45 Degree Angle TNC plug to TNC jack 18GHz VSWR1.2
品番 (MPN)
インピーダンス
50 Ohm
周波数
DC
インターフェース
TNC
図面からのカスタムRFケーブルアセンブリの量産調達
互換性確認、MOQガイド、コストダウン調達サポートを含む量産向け図面からのカスタムRFケーブルアセンブリ。
RFQ前に準備すること 明確な入力情報は推測を減らし、有用な回答を早めます。 ⌄
- • レビューに関連する場合は、参照MPN、メイティング部品、またはソースブランドを共有してください。
- • プロジェクトがプロトタイプ数量を超える場合は、BOM、数量配分、年間需要を追加してください。
- • インピーダンス、周波数、実装、めっきに関する図面、データシート、または重要要件を添付してください。
画像
クリックで拡大
仕様
| インターフェース | Adapters |
|---|---|
| インターフェース | TNC |
| インターフェース | TNC |
| インピーダンス | 50 Ohm |
| インピーダンス | 50 Ohm |
| 周波数（最大） | DC |
| 周波数（最大） | 18 GHz |
| 性別 | Male |
| 性別 | Female |
| Adapter Body Style | 45 Degree |
| Connector Body Material 1 | Passivated Stainless Steel |
| Connector Body Material 2 | Passivated Stainless Steel |
さらに 3 件の仕様を表示
| Connector Polarity 1 | Standard |
|---|---|
| Connector Polarity 2 | Standard |
| Category | Adapters |
説明
PE91600 の現在の参照データ：TNC · 50 Ohm · DC。 インピーダンスは 50 Ohm と記載されています。重要な項目であれば RFQ で再確認してください。 周波数は DC と記載されています。実際の動作上限は、組立、相手部品、使用環境によって変わります。 ここに実装情報がない場合は、図面または嵌合要件から確認してください。 材料は Passivated Stainless Steel と記載されています。確認には役立ちますが、プロジェクト全体の構造確認の代わりにはなりません。 このページは RFQ 前の候補選定に使用し、最終承認の根拠にはしないでください。
RFQ前の絞り込みにこのページをご利用ください。図面/仕様書/BOM確認後にMOQ 200+ の供給経路とカスタム生産ルートを確定します。
類似コネクタ
こちらのモデルもご覧ください：
LCCA30196-FT3
L-com's LCCA30196-FT3 is a low loss TNC male to TNC male cable assembly using LMR-400 coax, 3 FT with Times Microwave components and ships same-day. The LMR-400 coax of this TNC cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com TNC to TNC cable assembly has a male to male gender configuration with flexible LMR-400 series coax and operates to 6 GHz. The double shield of this TNC cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this TNC male to TNC male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30196-FT3 L-com Low Loss TNC Male to TNC Male Cable Assembly using LMR-400 Coax, 3 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
LCCA30581-FT6
L-com N male right angle to TNC male right angle cable assembly using LC085TB coax, 6 FT is available for same day shipping from our facility. This high quality N cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30581-FT6 N cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF coaxial cable assemblies are built with right angle N connection on one end and right angle TNC connection on the other. This right angle N to right angle TNC cable from L-com has a male to male gender combination. Our N male to TNC male coaxial assembly part number LCCA30581-FT6 can also be known as right angle N plug to right angle TNC plug cable assembly when using alternate gender names. N plug to TNC plug cable assembly LCCA30581-FT6 is manufactured with a formable coax. These formable N to TNC cable assemblies use LC085TB coax and are single shielded. L-com single shielded N male right angle to TNC male right angle cable assembly using LC085TB coax, 6 FT is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these N to TNC M/M cables is 6 GHz. Technical performance specifications on these 6 GHz N right angle male to TNC right angle male cables are located on the LCCA30581-FT6 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a right angle TNC male to right angle N male cable assembly because it can be used in the opposite direction.N male right angle to TNC male right angle cable assembly using LC085TB coax, 6 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our right angle N to right angle TNC cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our N male right angle to TNC male right angle cable assembly using LC085TB coax, 6 FT.
LCCA30196/WP-FT1
The L-com LCCA30196/WP-FT1 is a weatherproof low loss cable assembly that comes with TNC male connection with weatherproof boot on one end and TNC male with weatherproof boot on the other. L-com’s RF coaxial cable assembly products are designed for typical use, production, laboratory test and measurement, defense/military, aerial antenna towers, etc. The low loss cable has a 50 Ohm impedance and is specifically ready for quicker shipment than most in the industry can provide.This weatherproof low loss RF cable assembly operates at a maximum frequency of 6 GHz. Our RF cable assembly has a PE jacket with 0.405 inches diameter. The TNC male to TNC male cable assembly LCCA30196/WP-FT1 is built with LMR-400 coax, which has a flexible design.This RF cable assembly with 0.5 inches diameter has copper clad aluminum as cable’s inner conducting material and PE (F) dielectric type. The weatherproof boot low loss cable can operate at a temperature range of -40 to 85 degrees C. Additional dimensions, specifications, and CAD drawings for this LCCA30196/WP-FT1 low loss RF cable are available on our downloadable PDF datasheet.L-com stocks a wide selection of weatherproof low loss cable assemblies that ship the same business day as ordered from our warehouse. Make your online purchase right now to take advantage of our same-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal TNC male to TNC male cable assembly as per your requirements.
PTD1.33TP
RF ケーブルアセンブリ CASSY, Tfx, TNCF, UH FM
PE3C4025
Snap-On MMBX Plug to TNC Female Bulkhead Cable Using RG316 Coax
PT1741.83TNFBH
RF ケーブルアセンブリ CASSY, 174, TNCM,NFB H
免責事項
メーカー名、商標、記号、部品番号は、識別およびクロスリファレンスの目的でのみ使用されています。Cstone Technologyは互換性のある代替品のための中国拠点の輸出調達パートナーであり、オリジナルブランドとは提携していません。商標はそれぞれの所有者に帰属します。最終的な適合性はRFQプロセスにおける図面/仕様書のレビューで確認されます。