جزئیات محصول
4.1/9.5 Mini DIN Male Right Angle to 4.1/9.5 Mini DIN Female Bulkhead Low PIM Cable Using 1/4 inch Superflexible Coax
شماره قطعه (MPN)
Impedance
50 Ohm
Interface
4.1/9.5 Mini DIN
مجموعه کابل سفارشی RF از روی نقشه برای تأمین تولیدی
مجموعه کابل سفارشی RF از روی نقشه برای تأمین تولیدی با بررسی سازگاری، راهنمای MOQ و پشتیبانی کاهش هزینه.
پیش از RFQ ورودیهای واضح بررسی را سریعتر میکند. ⌄
- • اگر برند یا خانواده قطعه مهم است، MPN مرجع و برند منبع را ارسال کنید.
- • برای پروژههای تولیدی، BOM و تفکیک حجم را اضافه کنید.
- • نقشه یا نیازهای کلیدی سازگاری را پیوست کنید.
تصویر
برای بزرگنمایی روی تصویر کلیک کنید.
مشخصات
| اینترفیس | Cable Assemblies |
|---|---|
| اینترفیس | 1/4" Superflexible |
| اینترفیس | 4.1/9.5 Mini DIN |
| اینترفیس | 4.1/9.5 Mini DIN |
| امپدانس | 50 Ohm |
| امپدانس | 50 Ohm |
| امپدانس | 50 Ohm |
| جنسیت | Male |
| جنسیت | Female |
| جهتگیری | Right Angle |
| جهتگیری | Straight |
| Connector Polarity 1 | Standard |
نمایش 5 مشخصه بیشتر
| نصب | None |
|---|---|
| Connector Polarity 2 | Standard |
| نصب | Bulkhead |
| نوع کابل | PE-1/4SFHC |
| Category | Cable Assemblies |
توضیح
داده مرجع فعلی برای PE3C7825: 4.1/9.5 Mini DIN · 50 Ohm · Bulkhead. کاتالوگ فعلاً این پیکربندی را نشان میدهد: Right Angle. امپدانس بهصورت 50 Ohm ثبت شده است. اگر حیاتی است، دوباره در RFQ تأیید کنید. نصب بهصورت Bulkhead ثبت شده است. اگر محدودیت پنل، عبور از بدنه یا فلنج مهم است، ابعاد را با RFQ ارسال کنید. از این صفحه برای تهیه فهرست کوتاه پیش از RFQ استفاده کنید، نه تأیید نهایی.
از این صفحه برای تهیه فهرست کوتاه پیش از RFQ استفاده کنید. مسیر تأمین و تولید سفارشی MOQ 200+ پس از بررسی نقشه/مشخصات/BOM تأیید میشود؛ موجودی آماده فرض نمیشود.
کانکتورهای مشابه
مدلهای مرتبط:
PE3C10361
Fire Rated N Male to 7/16 DIN Male Low PIM Cable Using TCOM-400-FR Coax With Times Microwave Components
C091-11W005-000-2
Circular DIN Connectors MALE RECEPTACLE 5 WAY
FMCA2510
Low PIM RA 7/16 DIN Male to N Female Cable TFT-5G-402 Coax Using Times Microwave Components
NYS323-U
Circular DIN Connectors 7P MALE PLUG - DIN 270 NCKL/SILV; REAN
LCCA30179-FT2
L-com's LCCA30179-FT2 is a low loss 4.3-10 male to 4.3-10 male cable assembly using LMR-240-DB coax, 2 FT with Times Microwave components and ships same-day. The LMR-240-DB coax of this 4.3-10 cable uses the PE (F) dielectric with a VoP of 84%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 4.3-10 to 4.3-10 cable assembly has a male to male gender configuration with flexible LMR-240-DB series coax and operates to 5.8 GHz. The double shield of this 4.3-10 cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 4.3-10 male to 4.3-10 male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30179-FT2 L-com Low Loss 4.3-10 Male to 4.3-10 Male Cable Assembly using LMR-240-DB Coax, 2 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
FMCA1866
Plenum Low PIM RA 7/16 DIN Male to N Female Cable SPP-250-LLPL Coax Using Times Microwave Parts
جستجوی MPN جستجوی دقیق، پیشوندی و جزئی پشتیبانی میشود. ⌄
سلب مسئولیت
Cstone یک کارخانه تخصصی، نه شرکت بازرگانی، برای کانکتورهای RF و کواکسیال، آداپتورها و مجموعههای کابل از جمله N-type، BNC، SMA، SMP، SSMB و MMCX است. کانکتورها را بر اساس نقشههای 2D یا نمونه تولید میکنیم و سازگاری، MOQ، زمان تحویل و جزئیات تولید از طریق RFQ تأیید میشود. Cstone Technology با برندهای اصلی وابستگی ندارد. نام سازندگان، علائم تجاری، نمادها و شماره قطعات فقط برای شناسایی و تطبیق مرجع استفاده میشوند. علائم تجاری متعلق به مالکان مربوطه هستند. مناسب بودن نهایی در مرحله RFQ با بررسی نقشه/مشخصات تأیید میشود.