Product details
4.1/9.5 Mini DIN Male Right Angle to 4.1/9.5 Mini DIN Female Bulkhead Low PIM Cable Using 1/4 inch Superflexible Coax
Part number (MPN)
Impedance
50 Ohm
Interface
4.1/9.5 Mini DIN
Need a custom version from drawing?
We coordinate supplier-qualified RF connector and cable assembly sourcing from drawings, samples, or BOM. Typical production lead time is 3–6 weeks after drawing/spec review; feasibility, MOQ, and fit are confirmed by RFQ.
Before RFQ Clear inputs speed up review. ⌄
- • Share the reference MPN and source brand if it matters.
- • Add the BOM and volume split for production projects.
- • Attach the drawing or the key fit requirements.
Image
Click image to enlarge.
Specifications
| Interface | Cable Assemblies |
|---|---|
| Interface | 1/4" Superflexible |
| Interface | 4.1/9.5 Mini DIN |
| Interface | 4.1/9.5 Mini DIN |
| Impedance | 50 Ohm |
| Impedance | 50 Ohm |
| Impedance | 50 Ohm |
| Gender | Male |
| Gender | Female |
| Orientation | Right Angle |
| Orientation | Straight |
| Connector Polarity 1 | Standard |
Show 5 more specs
| Mounting | None |
|---|---|
| Connector Polarity 2 | Standard |
| Mounting | Bulkhead |
| Cable type | PE-1/4SFHC |
| Category | Cable Assemblies |
Description
Current reference data for PE3C7825: 4.1/9.5 Mini DIN · 50 Ohm · Bulkhead. The catalog currently lists the configuration as: Right Angle. Impedance is listed as 50 Ohm. If that parameter is critical, confirm it again in RFQ. Mounting is listed as Bulkhead. If panel, bulkhead, or flange constraints matter, send the dimensions with the RFQ. Use this page to shortlist before RFQ, not as the final sign-off.
Use this page to shortlist before RFQ. MOQ 200+ custom production and supply path are confirmed after drawing/spec/BOM review; no spot stock is assumed.
Similar Connectors
Related models:
PE3C10361
Fire Rated N Male to 7/16 DIN Male Low PIM Cable Using TCOM-400-FR Coax With Times Microwave Components
C091-11W005-000-2
Circular DIN Connectors MALE RECEPTACLE 5 WAY
FMCA2510
Low PIM RA 7/16 DIN Male to N Female Cable TFT-5G-402 Coax Using Times Microwave Components
NYS323-U
Circular DIN Connectors 7P MALE PLUG - DIN 270 NCKL/SILV; REAN
LCCA30179-FT2
L-com's LCCA30179-FT2 is a low loss 4.3-10 male to 4.3-10 male cable assembly using LMR-240-DB coax, 2 FT with Times Microwave components and ships same-day. The LMR-240-DB coax of this 4.3-10 cable uses the PE (F) dielectric with a VoP of 84%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 4.3-10 to 4.3-10 cable assembly has a male to male gender configuration with flexible LMR-240-DB series coax and operates to 5.8 GHz. The double shield of this 4.3-10 cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 4.3-10 male to 4.3-10 male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30179-FT2 L-com Low Loss 4.3-10 Male to 4.3-10 Male Cable Assembly using LMR-240-DB Coax, 2 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
FMCA1866
Plenum Low PIM RA 7/16 DIN Male to N Female Cable SPP-250-LLPL Coax Using Times Microwave Parts
MPN Search Supports exact, prefix, and partial matching. ⌄
Disclaimer
Manufacturer names, trademarks, symbols, and part numbers are used for identification and cross-reference only. Cstone Technology operates its own factory for RF/coaxial connectors, adapters, and cable assemblies and is not a trading company or affiliated with the original brands. Trademarks remain the property of their respective owners. Final suitability is confirmed by drawing/spec review during RFQ.