جزئیات محصول
TNC Straight Crimp Jack RG-174 RG-188 RG-316 Times LMR-100A Bulkhead Rear Mount 50 Ohm
شماره قطعه (MPN)
Impedance
50
Frequency
3
مجموعه کابل سفارشی RF از روی نقشه برای تأمین تولیدی
مجموعه کابل سفارشی RF از روی نقشه برای تأمین تولیدی با بررسی سازگاری، راهنمای MOQ و پشتیبانی کاهش هزینه.
پیش از RFQ ورودیهای واضح بررسی را سریعتر میکند. ⌄
- • اگر برند یا خانواده قطعه مهم است، MPN مرجع و برند منبع را ارسال کنید.
- • برای پروژههای تولیدی، BOM و تفکیک حجم را اضافه کنید.
- • نقشه یا نیازهای کلیدی سازگاری را پیوست کنید.
تصویر
برای بزرگنمایی روی تصویر کلیک کنید.
مشخصات
| اینترفیس | RG-174, RG-188, RG-316, Times LMR-100A, Belden 7805A, Belden 8216, Belden 83269, Belden 83284, Belden 84316, Times RG-174LL, Shikoku 1.5DS-QFB-TA, Sumitomo 1.5DS-GXC-SP, Leoni DACAR 462, Leoni DACAR 462-2 |
|---|---|
| امپدانس | 50 |
| فرکانس (حداکثر) | 3 |
| جنسیت | Jack |
| جهتگیری | Straight |
| ترمینیشن | Crimp |
| ترمینیشن | Cable - Crimp |
| نصب | Bulkhead - Rear Mount |
| Body Material | Brass |
| ترمینیشن | Phosphor Bronze |
| Body Finish | Nickel |
| ترمینیشن | Gold |
نمایش 14 مشخصه بیشتر
| مکانیزم کوپلینگ | Threaded |
|---|---|
| ترمینیشن | CTL-2 |
| Export Control Classification Number | EAR99 |
| درجه IP | Not Rated |
| Insulator Material | PTFE |
| Isolated | No |
| Low PIM | No |
| Mil Qualified | Not Mil Qualified |
| Non Magnetic | No |
| Ports | 1 (Single Port) |
| Size Category | Miniature |
| Temp (Max Degrees Celsius) | 85 |
| Temp (Min Degrees Celsius) | -40 |
| مکانیزم کوپلینگ | Standard |
توضیح
داده مرجع فعلی برای 031-2318: 50 · 3 · Bulkhead - Rear Mount. کاتالوگ فعلاً این پیکربندی را نشان میدهد: Straight · Crimp. امپدانس بهصورت 50 ثبت شده است. اگر حیاتی است، دوباره در RFQ تأیید کنید. فرکانس بهصورت 3 ثبت شده است. حد واقعی هنوز به مجموعه، جفت اتصال و کاربرد وابسته است. نصب بهصورت Bulkhead - Rear Mount ثبت شده است. اگر محدودیت پنل، عبور از بدنه یا فلنج مهم است، ابعاد را با RFQ ارسال کنید. جنس بهصورت Brass ثبت شده است. برای بررسی مفید است، اما جایگزین تأیید کامل چیدمان پروژه نیست. کاتالوگ مقدار آببندی یا حفاظت را نیز Not Rated نشان میدهد. آن را با شرایط واقعی محیط در RFQ مقایسه کنید. از این صفحه برای تهیه فهرست کوتاه پیش از RFQ استفاده کنید، نه تأیید نهایی.
از این صفحه برای تهیه فهرست کوتاه پیش از RFQ استفاده کنید. مسیر تأمین و تولید سفارشی MOQ 200+ پس از بررسی نقشه/مشخصات/BOM تأیید میشود؛ موجودی آماده فرض نمیشود.
کانکتورهای مشابه
مدلهای مرتبط:
031-6101
RF Adapters - Between Series RP TNC PANEL JACK TO AMC/U.FL PLUG ADPT.
N80T60-58-
N jack to TNC reverse polarity plug using RG58
LCCA30580-FT5
L-com N male right angle to TNC male cable assembly using LC085TB coax, 5 FT is available for same day shipping from our facility. This high quality N cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30580-FT5 N cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF coaxial cable assemblies are built with right angle N connection on one end and TNC connection on the other. This right angle N to TNC cable from L-com has a male to male gender combination. Our N male to TNC male coaxial assembly part number LCCA30580-FT5 can also be known as right angle N plug to TNC plug cable assembly when using alternate gender names. N plug to TNC plug cable assembly LCCA30580-FT5 is manufactured with a formable coax. These formable N to TNC cable assemblies use LC085TB coax and are single shielded. L-com single shielded N male right angle to TNC male cable assembly using LC085TB coax, 5 FT is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these N to TNC M/M cables is 6 GHz. Technical performance specifications on these 6 GHz N right angle male to TNC male cables are located on the LCCA30580-FT5 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a TNC male to right angle N male cable assembly because it can be used in the opposite direction.N male right angle to TNC male cable assembly using LC085TB coax, 5 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our right angle N to TNC cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our N male right angle to TNC male cable assembly using LC085TB coax, 5 FT.
PE3425LF
TNC Male to TNC Male Cable Using RG174 Coax, RoHS
LCCA30521-FT4
L-com N female to TNC female bulkhead cable assembly using LC141TBJ coax, 4 FT is available for same day shipping from our facility. This high quality N cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30521-FT4 N cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF coaxial cable assemblies are built with N connection on one end and TNC bulkhead connection on the other. This N to TNC cable from L-com has a female to female gender combination. Our N female to TNC female coaxial assembly part number LCCA30521-FT4 can also be known as N jack to TNC jack cable assembly when using alternate gender names. N jack to TNC jack cable assembly LCCA30521-FT4 is manufactured with a formable coax.Maximum frequency for these N to TNC F/F cables is 6 GHz. Technical performance specifications on these 6 GHz N female to TNC female bulkhead cables are located on the LCCA30521-FT4 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a TNC female bulkhead to N female cable assembly because it can be used in the opposite direction.N female to TNC female bulkhead cable assembly using LC141TBJ coax, 4 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our N to TNC cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our N female to TNC female bulkhead cable assembly using LC141TBJ coax, 4 FT.
031-2315
RF Connectors / Coaxial Connectors TNC PLUG RG174/188
جستجوی MPN جستجوی دقیق، پیشوندی و جزئی پشتیبانی میشود. ⌄
سلب مسئولیت
Cstone یک کارخانه تخصصی، نه شرکت بازرگانی، برای کانکتورهای RF و کواکسیال، آداپتورها و مجموعههای کابل از جمله N-type، BNC، SMA، SMP، SSMB و MMCX است. کانکتورها را بر اساس نقشههای 2D یا نمونه تولید میکنیم و سازگاری، MOQ، زمان تحویل و جزئیات تولید از طریق RFQ تأیید میشود. Cstone Technology با برندهای اصلی وابستگی ندارد. نام سازندگان، علائم تجاری، نمادها و شماره قطعات فقط برای شناسایی و تطبیق مرجع استفاده میشوند. علائم تجاری متعلق به مالکان مربوطه هستند. مناسب بودن نهایی در مرحله RFQ با بررسی نقشه/مشخصات تأیید میشود.