Detalles del producto
TNC recto crimpado jack RG-174 RG-188 RG-316 Times LMR-100A Bulkhead Rear montaje 50 Ω
Número de parte (MPN)
Impedancia
50
Frecuencia
3
cable RF a medida desde plano para sourcing de producción
cable RF a medida desde plano orientado a producción con revisión de compatibilidad, guía de MOQ y soporte de reducción de coste.
Qué preparar antes del RFQ Los datos claros reducen las conjeturas y aceleran una respuesta útil. ⌄
- • Comparta el MPN de referencia, la pieza de acoplamiento o la marca de origen si es relevante para la revisión.
- • Agregue el BOM, la división de cantidad y la demanda anual si el proyecto supera el volumen de prototipo.
- • Adjunte el plano, la hoja de datos o los requisitos críticos de impedancia, frecuencia, montaje y recubrimiento.
Imagen
Haga clic para ampliar.
Specifications
| Acabado del cuerpo | níquel |
|---|---|
| Material del cuerpo | latón |
| Grado IP | RG-174 RG-188 RG-316 Times LMR-100A Belden 7805A Belden 8216 Belden 83269 Belden 83284 Belden 84316 Times RG-174LL Shikoku 1.5DS-QFB-TA Sumitomo 1.5DS-GXC-SP Leoni DACAR 462 Leoni DACAR 462-2 |
| Terminación | oro |
| Terminación | bronce fosforoso |
| Terminación | crimpado |
| Mecanismo de acoplamiento | Threaded |
| Terminación | CTL-2 |
| Número ECCN | EAR99 |
| Frecuencia (máx.) | 3 |
| Género | jack |
| Grado IP | Not Rated |
Show 14 more specs
| Impedancia | 50 |
|---|---|
| Material del aislante | PTFE |
| Aislado | no |
| Bajo PIM | no |
| Calificación MIL | Not Mil Qualified |
| No magnético | no |
| Orientación | recto |
| Montaje | Bulkhead - Rear montaje |
| Puertos | 1 (Single Port) |
| Categoría de tamaño | Miniature |
| Temp. máxima (°C) | 85 |
| Temp. mínima (°C) | -40 |
| Estilo de terminación | cable - crimpado |
| Dirección de rosca | estándar |
Descripción
Los datos de referencia para 031-2318 incluyen actualmente: 50 · 3 · Bulkhead - Rear montaje. El catálogo muestra actualmente la configuración como: CTL-2. La impedancia se indica como 50. Si es un parámetro crítico, confírmelo en el RFQ. La frecuencia se indica como 3. El límite real depende del ensamblaje, par de acoplamiento y contexto. El montaje se indica como Bulkhead - Rear montaje. Si importan restricciones de panel, bulkhead o brida, envíe las dimensiones con el RFQ. El material se indica como latón. Es útil para revisión, pero no sustituye la confirmación completa del proyecto. El catálogo también muestra un valor de sellado/protección: Not Rated. Verifíquelo con el requisito real. Esta página es para revisión y preselección. La confirmación final de ajuste, MOQ y plazo viene tras la revisión del plano, especificación o BOM.
Use esta página para filtrar antes del RFQ. La ruta de suministro y la producción personalizada MOQ 200+ se confirman tras revisar plano/especificación/BOM.
Conectores similares
También podrían interesarle estos modelos:
031-6101
Adaptadores RF - entre serie RP TNC panel jack a AMC/U.FL enchufe ADPT.
N80T60-58-
N jack a TNC polaridad inversa enchufe using RG58
LCCA30580-FT5
L-com N male right angle to TNC male cable assembly using LC085TB coax, 5 FT is available for same day shipping from our facility. This high quality N cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30580-FT5 N cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF coaxial cable assemblies are built with right angle N connection on one end and TNC connection on the other. This right angle N to TNC cable from L-com has a male to male gender combination. Our N male to TNC male coaxial assembly part number LCCA30580-FT5 can also be known as right angle N plug to TNC plug cable assembly when using alternate gender names. N plug to TNC plug cable assembly LCCA30580-FT5 is manufactured with a formable coax. These formable N to TNC cable assemblies use LC085TB coax and are single shielded. L-com single shielded N male right angle to TNC male cable assembly using LC085TB coax, 5 FT is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these N to TNC M/M cables is 6 GHz. Technical performance specifications on these 6 GHz N right angle male to TNC male cables are located on the LCCA30580-FT5 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a TNC male to right angle N male cable assembly because it can be used in the opposite direction.N male right angle to TNC male cable assembly using LC085TB coax, 5 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our right angle N to TNC cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our N male right angle to TNC male cable assembly using LC085TB coax, 5 FT.
PE3425LF
TNC Male to TNC Male Cable Using RG174 Coax, RoHS
LCCA30521-FT4
L-com N female to TNC female bulkhead cable assembly using LC141TBJ coax, 4 FT is available for same day shipping from our facility. This high quality N cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30521-FT4 N cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF coaxial cable assemblies are built with N connection on one end and TNC bulkhead connection on the other. This N to TNC cable from L-com has a female to female gender combination. Our N female to TNC female coaxial assembly part number LCCA30521-FT4 can also be known as N jack to TNC jack cable assembly when using alternate gender names. N jack to TNC jack cable assembly LCCA30521-FT4 is manufactured with a formable coax.Maximum frequency for these N to TNC F/F cables is 6 GHz. Technical performance specifications on these 6 GHz N female to TNC female bulkhead cables are located on the LCCA30521-FT4 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a TNC female bulkhead to N female cable assembly because it can be used in the opposite direction.N female to TNC female bulkhead cable assembly using LC141TBJ coax, 4 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our N to TNC cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our N female to TNC female bulkhead cable assembly using LC141TBJ coax, 4 FT.
031-2315
RF conectores / Coaxial conectores TNC enchufe RG174/188
Búsqueda por MPN Admite coincidencia exacta, por prefijo y parcial. ⌄
Aviso legal
Cstone es una fábrica profesional, no una empresa comercial, especializada en conectores RF y coaxiales, adaptadores y conjuntos de cable, incluidos N-type, BNC, SMA, SMP, SSMB y MMCX. Fabricamos conectores según planos 2D o muestras; el ajuste, MOQ, plazo y detalles de producción se confirman por RFQ. Cstone Technology no está afiliada a las marcas originales. Los nombres de fabricantes, marcas registradas, símbolos y números de pieza se utilizan solo con fines de identificación y referencia cruzada. Las marcas registradas son propiedad de sus respectivos dueños. La idoneidad final se confirma mediante revisión de plano/especificación durante el RFQ.