Product details
RF Connectors Coaxial Connectors TNC Bulkhead Jack Strt Solder 75 Ohm
Part number (MPN)
Impedance
75 Ohms
Frequency
1 GHz
Need a custom version from drawing?
We coordinate supplier-qualified RF connector and cable assembly sourcing from drawings, samples, or BOM. Typical production lead time is 3–6 weeks after drawing/spec review; feasibility, MOQ, and fit are confirmed by RFQ.
Before RFQ Clear inputs speed up review. ⌄
- • Share the reference MPN and source brand if it matters.
- • Add the BOM and volume split for production projects.
- • Attach the drawing or the key fit requirements.
Image
Click image to enlarge.
Specifications
| Interface | _ |
|---|---|
| Interface | TNC |
| Impedance | 75 Ohms |
| Frequency (max) | 1 GHz |
| Gender | Jack (Socket) |
| Orientation | Straight |
| Termination | Solder Cup |
| Mounting | Bulkhead - Front Mount |
| Product | Connectors |
| Polarity | _ |
| IP rating | _ |
| Packaging | Bulk |
Description
Current reference data for 122333: 75 Ohms · 1 GHz · Bulkhead - Front Mount. The catalog currently lists the configuration as: Straight · Solder Cup. Impedance is listed as 75 Ohms. If that parameter is critical, confirm it again in RFQ. Frequency is listed as 1 GHz. The real operating limit still depends on the assembly, mating pair, and application context. Mounting is listed as Bulkhead - Front Mount. If panel, bulkhead, or flange constraints matter, send the dimensions with the RFQ. The catalog also lists a sealing or protection value of _. Check that against the real environment requirement in RFQ. Use this page to shortlist before RFQ, not as the final sign-off.
Use this page to shortlist before RFQ. MOQ 200+ custom production and supply path are confirmed after drawing/spec/BOM review; no spot stock is assumed.
Similar Connectors
Related models:
PE3421
TNC Male to TNC Male Cable Using RG213 Coax
1060929-1
RF Connectors / Coaxial Connectors SCD 3101 5080 31 TNC
N80T60-L240-
N jack to TNC reverse polarity plug using JBY240
LCCA30233-FT10
L-com's LCCA30233-FT10 is a low loss N male to TNC male cable assembly using LMR-195-FR coax, 10 FT with Times Microwave components and ships same-day. The LMR-195-FR coax of this N cable uses the PE dielectric with a VoP of 76%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to TNC cable assembly has a male to male gender configuration with flexible LMR-195-FR series coax and operates to 5.8 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30233-FT10 L-com Low Loss N Male to TNC Male Cable Assembly using LMR-195-FR Coax, 10 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
SC4251
TNC Male (Plug) Connector Solder Cup Terminal 4 Hole Flange (Panel Mount), Solder, Nickel Plated Brass Body, Length 0.874 In
122210G
TNC Jack RG-174 RG-188 RG-316 Times LMR-100A Bulkhead Rear Mount 50 Ohm Isolated
MPN Search Supports exact, prefix, and partial matching. ⌄
Disclaimer
Manufacturer names, trademarks, symbols, and part numbers are used for identification and cross-reference only. Cstone Technology operates its own factory for RF/coaxial connectors, adapters, and cable assemblies and is not a trading company or affiliated with the original brands. Trademarks remain the property of their respective owners. Final suitability is confirmed by drawing/spec review during RFQ.