Product details
TNC connector; configuration: Straight; impedance 50Ohm; mounting Free Hanging (In-Line)
Part number (MPN)
Impedance
50Ohm
Interface
TNC
Need a custom version from drawing?
We coordinate supplier-qualified RF connector and cable assembly sourcing from drawings, samples, or BOM. Typical production lead time is 3–6 weeks after drawing/spec review; feasibility, MOQ, and fit are confirmed by RFQ.
Before RFQ Clear inputs speed up review. ⌄
- • Share the reference MPN and source brand if it matters.
- • Add the BOM and volume split for production projects.
- • Attach the drawing or the key fit requirements.
Image
Click image to enlarge.
Specifications
| Interface | TNC |
|---|---|
| Impedance | 50Ohm |
| Orientation | Straight |
| Mounting | Free Hanging (In-Line) |
| Body Material | Brass |
| Body Finish | Nickel |
| Operating Temperature | -55°C~85°C |
| Category | 射频精密转接器 (RF Adapters) |
Description
Current reference data for VA225: TNC · 50Ohm · Free Hanging (In-Line). The catalog currently lists the configuration as: Straight. Impedance is listed as 50Ohm. If that parameter is critical, confirm it again in RFQ. Mounting is listed as Free Hanging (In-Line). If panel, bulkhead, or flange constraints matter, send the dimensions with the RFQ. Material is listed as Brass. That is useful for review, but it does not replace full project stack-up confirmation. Use this page to shortlist before RFQ, not as the final sign-off.
Use this page to shortlist before RFQ. MOQ 200+ custom production and supply path are confirmed after drawing/spec/BOM review; no spot stock is assumed.
Similar Connectors
Related models:
N39T95-174-
N plug right angle to TNC reverse polarity jack bulkhead using RG174
095-850-272-006
TNC Straight Plug to TNC Straight Plug RG-174 6 inches
TNC6100-L240
TNC reverse polarity plug crimp for JBY240,LMR240; 6GHz VSWR1.3
Telegärtner: TNC cable connector Crimp G05
Telegärtner: TNC cable connector Crimp G05, TNC cable connector G5 (RG-223/U), solder/crimp, longitudinally tight IP67, A4905 VE5
LCCA30178-FT6
L-com's LCCA30178-FT6 is a low loss TNC male to TNC male right angle cable assembly using LMR-240 coax, 6 FT with Times Microwave components and ships same-day. The LMR-240 coax of this TNC cable uses the PE (F) dielectric with a VoP of 84%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com TNC to TNC cable assembly has a male to male gender configuration with flexible LMR-240 series coax and operates to 2 GHz. The double shield of this TNC cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. This right angle TNC cable interface on the LMR-240 coax allows for easier connections in tight spaces. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this TNC male to TNC male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30178-FT6 L-com Low Loss TNC Male to TNC Male Right Angle Cable Assembly using LMR-240 Coax, 6 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
FMAD1581
Miter RA TNC Male to TNC Male Adapter with Passivated Stainless Steel Body, DC to 18 GHz
MPN Search Supports exact, prefix, and partial matching. ⌄
Disclaimer
Manufacturer names, trademarks, symbols, and part numbers are used for identification and cross-reference only. Cstone Technology operates its own factory for RF/coaxial connectors, adapters, and cable assemblies and is not a trading company or affiliated with the original brands. Trademarks remain the property of their respective owners. Final suitability is confirmed by drawing/spec review during RFQ.