Produktdetails
Our RF Adapter Series offers Straight series connectors in: 1.85mm, 2.40mm, 2.92mm, 3.50mm, N Type, SMA, TNC, BNC, APC-7, Flange Mount and Right Angle. The RF Adapters are used to transfer signals from one connector interface to another.
Teilenummer (MPN)
Impedanz
50Ohm
kundenspezifische RF-Kabelbaugruppe nach Zeichnung für Produktions-Sourcing
Produktionsorientierte kundenspezifische RF-Kabelbaugruppe nach Zeichnung mit Kompatibilitätsprüfung, MOQ-Führung und Cost-down-Sourcing-Unterstützung.
Was vor dem RFQ vorzubereiten ist Klare Eingaben reduzieren Vermutungen und beschleunigen eine nützliche Antwort. ⌄
- • Teilen Sie die Referenz-MPN, das Gegenstück oder die Quellmarke mit, wenn es für die Prüfung relevant ist.
- • Fügen Sie BOM, Mengenaufteilung und Jahresbedarf hinzu, wenn das Projekt über den Prototypenumfang hinausgeht.
- • Legen Sie Zeichnung, Datenblatt oder kritische Anforderungen zu Impedanz, Frequenz, Montage und Beschichtung bei.
Bild
Zum Vergrößern klicken.
Specifications
| Schnittstelle | RF Connectors |
|---|---|
| Schnittstelle | RF Adapter Series |
| Impedanz | 50Ohm |
| Body Material | Stainless Steel Passivation |
| Terminierung | Beryllium Copper |
| IP-Schutzart | SMA Plug to N Jack RF Adapter, 4 Hole Flange |
| Maximum Voltage | 335V |
| Temperature range | -40°C to +85°C |
| Frecuency range | 0GHz - 18GHz |
| VSWR | <1.15 |
| Dielectric withstanding Voltage | >750V |
| Category | RF Connectors |
Show 8 more specs
| Product Features | RF Adapter Series Flange Mount; range_code: RFAA4 Range |
|---|---|
| Part Number | RFAA4SMAPNJA |
| Lifecycle | New From This Manufacturer |
| Delivery | DHL、UPS、FedEx、Registered Mail |
| Payment | T/T Paypal Visa MoneyGram Western Union |
| More Information | RFAA4SMAPNJA More Information |
| ECAD | Request Free CAD Models |
| Model Number | RFAA4SMAPNJA |
Beschreibung
Aktuelle Referenzdaten für RFAA4SMAPNJA: 50Ohm. Die Impedanz ist als 50Ohm angegeben. Wenn dieser Parameter kritisch ist, bestätigen Sie ihn im RFQ erneut. Wenn die Montage hier fehlt, bestätigen Sie sie aus der Zeichnung oder der Gegenstückanforderung. Das Material ist als Stainless Steel Passivation angegeben. Das hilft bei der Prüfung, ersetzt aber nicht die Bestätigung der vollständigen Projektkonstruktion. Nutzen Sie diese Seite zur Vorauswahl vor dem RFQ, nicht als endgültige Freigabe.
Nutzen Sie diese Seite für die Vorauswahl vor der RFQ. Lieferweg und MOQ 200+ Sonderfertigung werden nach Prüfung von Zeichnung/Spezifikation/BOM bestätigt.
Ähnliche Steckverbinder
Diese Modelle könnten ebenfalls interessant sein:
SF1080-6005
RF-Adapter zwischen Serien SMA männlich zu SMPM männlich Adapter, FD
MP-1.5X
The MP-1.5X is an M Straight Plug connector, designed for coaxial cables. This connector is suitable for various high-frequency applications.Fits 1.5D-2V,1.5D-QEV,RG-188A/U,EM-1.5D-2E cables. It features a impedance Mismatch, operates up to 200MHz, and has a rated voltage of AC 500V, ensures a high insulation resistance (100MΩ(Min.) at DC 500V), a low contact resistance (3 mΩ(Max.). Withstanding temperatures from -40 to +85°C. The contact is made of Brass/Gold-Plated/Soldered, while the body is Brass/Nickel Plating/Soldering. We can customize our products for you. We offer total customization, including changes to a product's shape, length, material, surface treatment, and packaging.
5319505
RF-Adapter zwischen Serien TNC Stecker SMA Buchse
PE3C3529LF
BNC Male to SMA Female Bulkhead Cable Using RG316-DS Coax, LF Solder
LCCA30156/WP-FT4
The L-com LCCA30156/WP-FT4 is a weatherproof low loss cable assembly that comes with SMA male connection with weatherproof boot on one end and SMA male with weatherproof boot on the other. L-com’s RF coaxial cable assembly products are designed for typical use, production, laboratory test and measurement, defense/military, aerial antenna towers, etc. The low loss cable has a 50 Ohm impedance and is specifically ready for quicker shipment than most in the industry can provide.This weatherproof low loss RF cable assembly operates at a maximum frequency of 6 GHz. Our RF cable assembly has a PE jacket with 0.195 inches diameter. The SMA male to SMA male cable assembly LCCA30156/WP-FT4 is built with LMR-195 coax, which has a flexible design.This RF cable assembly with 0.5 inches diameter has copper as cable’s inner conducting material and PE (F) dielectric type. The weatherproof boot low loss cable is reusable and can withstand elements including extreme temperature. Additional dimensions, specifications, and CAD drawings for this LCCA30156/WP-FT4 low loss RF cable are available on our downloadable PDF datasheet.L-com stocks a wide selection of weatherproof low loss cable assemblies that ship the same business day as ordered from our warehouse. Make your online purchase right now to take advantage of our same-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal SMA male to SMA male cable assembly as per your requirements.
FMTR1164
SMA Male (Plug) Termination (Load) 5 Watts to 26.5 GHz, Black Anodized Aluminum Body, 1.30:1 VSWR
MPN-Suche Unterstützt exakte, Präfix- und Teiltreffer. ⌄
Haftungsausschluss
Herstellernamen, Marken, Symbole und Teilenummern werden ausschließlich zur Identifikation und zum Querverweis verwendet. Cstone Technology ist ein in China ansässiger Export-Beschaffungspartner für kompatible Alternativen und steht in keiner Verbindung zu den Originalmarken. Marken verbleiben im Eigentum der jeweiligen Inhaber. Die endgültige Eignung wird durch Prüfung der Zeichnung/Spezifikation im Rahmen der RFQ bestätigt.