Produktdetails
The MP-1.5X is an M Straight Plug connector, designed for coaxial cables. This connector is suitable for various high-frequency applications.Fits 1.5D-2V,1.5D-QEV,RG-188A/U,EM-1.5D-2E cables. It features a impedance Mismatch, operates up to 200MHz, and has a rated voltage of AC 500V, ensures a high insulation resistance (100MΩ(Min.) at DC 500V), a low contact resistance (3 mΩ(Max.). Withstanding temperatures from -40 to +85°C. The contact is made of Brass/Gold-Plated/Soldered, while the body is Brass/Nickel Plating/Soldering. We can customize our products for you. We offer total customization, including changes to a product's shape, length, material, surface treatment, and packaging.
Teilenummer (MPN)
kundenspezifische RF-Kabelbaugruppe nach Zeichnung für Produktions-Sourcing
Produktionsorientierte kundenspezifische RF-Kabelbaugruppe nach Zeichnung mit Kompatibilitätsprüfung, MOQ-Führung und Cost-down-Sourcing-Unterstützung.
Was vor dem RFQ vorzubereiten ist Klare Eingaben reduzieren Vermutungen und beschleunigen eine nützliche Antwort. ⌄
- • Teilen Sie die Referenz-MPN, das Gegenstück oder die Quellmarke mit, wenn es für die Prüfung relevant ist.
- • Fügen Sie BOM, Mengenaufteilung und Jahresbedarf hinzu, wenn das Projekt über den Prototypenumfang hinausgeht.
- • Legen Sie Zeichnung, Datenblatt oder kritische Anforderungen zu Impedanz, Frequenz, Montage und Beschichtung bei.
Bild
Zum Vergrößern klicken.
Specifications
| Schnittstelle | M Plug |
|---|---|
| IP-Schutzart | {'text': "The MP-1.5X is an M Straight Plug connector, designed for coaxial cables. This connector is suitable for various high-frequency applications.Fits 1.5D-2V,1.5D-QEV,RG-188A/U,EM-1.5D-2E cables. It features a impedance Mismatch, operates up to 200MHz, and has a rated voltage of AC 500V, ensures a high insulation resistance (100MΩ(Min.) at DC 500V), a low contact resistance (3 mΩ(Max.). Withstanding temperatures from -40 to +85°C. The contact is made of Brass/Gold-Plated/Soldered, while the body is Brass/Nickel Plating/Soldering. We can customize our products for you. We offer total customization, including changes to a product's shape, length, material, surface treatment, and packaging."} |
| Specifications | {'Cable type': 'RG-188A/U', 'Connector Gender': 'Plug', 'Impedance (Ohms)': 'Mismatch', 'Rated Voltage AC': 'AC 500V', 'Operating Frequency Range': '200MHz', 'Insulation Resistance': '100MΩ(Min.) at DC 500V', 'Withstand Voltage': 'AC 1000V(1 minute)', 'Contact Resistance': '3 mΩ(Max.)', 'Operating Temperature Range': '-40 to +85°C'} |
| Material/Plating/Attachment | {'Contact': 'Brass/Gold-Plated/Soldered', 'Body': 'Brass/Nickel Plating/Soldering'} |
| Category | M Plug |
| Product Features | Made to order product; Mismatch; Plug; RoHS2 |
Beschreibung
Für MP-1.5X ist eine Referenz-MPN angegeben; die endgültige Bestätigung hängt von Zeichnung, Spezifikation oder BOM ab. Wenn die Montage hier fehlt, bestätigen Sie sie aus der Zeichnung oder der Gegenstückanforderung. Das Material ist als {'Contact': 'Brass/Gold-Plated/Soldered', 'Body': 'Brass/Nickel Plating/Soldering'} angegeben. Das hilft bei der Prüfung, ersetzt aber nicht die Bestätigung der vollständigen Projektkonstruktion. Nutzen Sie diese Seite zur Vorauswahl vor dem RFQ, nicht als endgültige Freigabe.
Nutzen Sie diese Seite für die Vorauswahl vor der RFQ. Lieferweg und MOQ 200+ Sonderfertigung werden nach Prüfung von Zeichnung/Spezifikation/BOM bestätigt.
Ähnliche Steckverbinder
Diese Modelle könnten ebenfalls interessant sein:
PE9400
SMA Male to UHF Female Adapter
PE3C5263
SMA Male Right Angle to TNC Female Bulkhead Low Loss Cable Using PE-P160LL Coax
9230-9553-019
SMA / gerade Buchse weiblich CLAMP Typ für 2.6/50 D Kabel PASSIVATED CAPTIVE Kontakt
A90N80-L100-
SMA umgekehrt Polarität Buchse zu N Buchse using JBY100
RFPCB-SMA-FS18G-59
RFPCB-SMA-FS18G-59 SMA female PCB connector available from L-com has a 50 Ohm impedance. This RF connector has an edge mount connector mount interface and is designed for a wide variety of Printed-Circuit Board (PCB) applications in RF and microwave systems. This SMA female connector uses solder as an attachment method. Our SMA female PCB connector provides a minimum frequency of DC and a maximum frequency of 18 GHz. The SMA connector is available in a 0.52-inch length and 0.32-inch width. The L-com SMA female PCB connector has a PTFE dielectric type and a VSWR of 1.2:1. This SMA PCB connector has a brass body with gold plating. Our RFPCB-SMA-FS18G-59 SMA connector uses beryllium copper alloy contacts and gold plating material. This SMA female PCB radio frequency connector is RoHS and REACH compliant. This L-com SMA female connector will ship the same day as purchased. Our SMA female connector is part of over 40,000 RF, microwave, and millimeter wave components in stock for worldwide shipment. We also build SMA custom connector cable assemblies that will ship the same day as well. The SMA female connector with 50 Ohm impedance has a weight of 0.005115 lbs. This RF connector has a high-quality construction. The female coaxial connector is capable of operating at temperatures ranging from -55 deg C to 125 deg C. We currently have a variety of antenna, audio/video, Ethernet, fiber optic, and USB connectors in our portfolio that are ready to ship today. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality RF that meets your requirements.
05S150-075S3
RF-Steckverbinder / Koaxial-Steckverbinder MISMATCH
MPN-Suche Unterstützt exakte, Präfix- und Teiltreffer. ⌄
Haftungsausschluss
Herstellernamen, Marken, Symbole und Teilenummern werden ausschließlich zur Identifikation und zum Querverweis verwendet. Cstone Technology ist ein in China ansässiger Export-Beschaffungspartner für kompatible Alternativen und steht in keiner Verbindung zu den Originalmarken. Marken verbleiben im Eigentum der jeweiligen Inhaber. Die endgültige Eignung wird durch Prüfung der Zeichnung/Spezifikation im Rahmen der RFQ bestätigt.