產品詳情
BMZ Size 8 D38999 Contact Pin (40 GHz) to SMA Female Cable Using PE-P086 Coax with HeatShrink, LF Solder
料號（MPN）
阻抗
50 Ohm
介面
BMZ
依圖客製 RF 線纜組件 的量產採購
面向量產的 依圖客製 RF 線纜組件，包含相容性審查、MOQ 建議與成本優化採購支援。
圖片
點擊圖片放大。
規格
| 介面 | MIL-STD Cable Assemblies |
|---|---|
| 介面 | Coax |
| 介面 | BMZ |
| 介面 | SMA |
| 阻抗 | 50 Ohm |
| 阻抗 | 50 Ohm |
| 阻抗 | 50 Ohm |
| 公母 | Pin |
| 公母 | Female |
| 方向 | Straight |
| 方向 | Straight |
| Connector 1 Body Material | Stainless Steel |
顯示另外 9 項規格
| Connector 1 Body Plating | Gold |
|---|---|
| Connector 1 Size | 8 |
| Connector 1 Specification | MIL-DTL-38999 |
| Connector 1 Polarity | Standard |
| Connector 2 Specification | MIL-STD-348 |
| Connector 2 Polarity | Standard |
| 線纜類型 | PE-P086 |
| 線纜類型 | PE-P086 datasheet |
| Category | MIL-STD Cable Assemblies |
描述
PE3M0321 目前參考資料：BMZ · 50 Ohm · Straight。 型錄目前列出的配置為：Straight。 阻抗列為 50 Ohm。若此參數很關鍵，請在 RFQ 中再次確認。 若此處缺少安裝資訊，請依圖紙或配對要求確認。 材料列為 Stainless Steel。這有助於審查，但不能取代對完整專案結構與材料配置的確認。 此頁用於 RFQ 前候選篩選，不作為最終核准依據。
可先用此頁建立 RFQ 前的候選清單。MOQ 200+ 客製生產與供應路徑，會在圖紙/規格/BOM 審查後確認；不預設現貨。
相似連接器
相關型號：
ADS-A8J8-P2B
SMA 插座 至 BMA 插座 2-hole flange 18 GHz VSWR1.15
LCCA30232-FT4
L-com's LCCA30232-FT4 is a low loss SMA male to TNC male cable assembly using LMR-195-FR coax, 4 FT with Times Microwave components and ships same-day. The LMR-195-FR coax of this SMA cable uses the PE dielectric with a VoP of 76%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com SMA to TNC cable assembly has a male to male gender configuration with flexible LMR-195-FR series coax and operates to 5.8 GHz. The double shield of this SMA cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this SMA male to SMA male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30232-FT4 L-com Low Loss SMA Male to TNC Male Cable Assembly using LMR-195-FR Coax, 4 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
ADP-SMAF-MCXM
RF 轉接器 - 跨系列 SMA 插座 至 MCX 插頭 轉接器
LCCA30408-FT1
L-com SMA male to N male right angle cable assembly using LC141TB coax, 1 FT is available for same day shipping from our facility. This high quality SMA cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30408-FT1 SMA cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF coaxial cable assemblies are built with SMA connection on one end and right angle N connection on the other. This SMA to right angle N cable from L-com has a male to male gender combination. Our SMA male to N male coaxial assembly part number LCCA30408-FT1 can also be known as SMA plug to right angle N plug cable assembly when using alternate gender names. SMA plug to N plug cable assembly LCCA30408-FT1 is manufactured with a formable coax. These formable SMA to N cable assemblies use LC141TB coax and are single shielded. L-com single shielded SMA male to N male right angle cable assembly using LC141TB coax, 1 FT is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these SMA to N M/M cables is 10 GHz. Technical performance specifications on these 10 GHz SMA male to N right angle male cables are located on the LCCA30408-FT1 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a right angle N male to SMA male cable assembly because it can be used in the opposite direction.SMA male to N male right angle cable assembly using LC141TB coax, 1 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our SMA to right angle N cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our SMA male to N male right angle cable assembly using LC141TB coax, 1 FT.
LCCA30318-FT10
L-com's LCCA30318-FT10 is a low loss 7/16 DIN male right angle to SMA male cable assembly using LMR-400-DB coax, 10 FT with Times Microwave components and ships same-day. The LMR-400-DB coax of this 7/16 DIN cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 7/16 DIN to SMA cable assembly has a male to male gender configuration with flexible LMR-400-DB series coax and operates to 3 GHz. The double shield of this 7/16 DIN cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. This right angle 7/16 DIN cable interface on the LMR-400-DB coax allows for easier connections in tight spaces. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 7/16 DIN male to 7/16 DIN male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30318-FT10 L-com Low Loss 7/16 DIN Male Right Angle to SMA Male Cable Assembly using LMR-400-DB Coax, 10 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
095-909-195M300
N-Type 直式 插頭 至 SMA 直式 插頭 RG-142 50 Ω 3000 mm
聲明
製造商名稱、商標、標誌與料號僅用於識別與交叉參照。Cstone Technology 是位於中國的經紀/分銷商與相容替代品出口採購夥伴，與原品牌沒有隸屬關係。商標屬於各自權利人。最終適配性會在 RFQ 階段透過圖紙/規格審查確認。