產品詳情
FMAD1007 — SMA 母座 (插座) 至 SMP 公頭 (插頭) Limited Detent 轉接器, Passivated 不鏽鋼 本體, 1.3 VSWR
料號（MPN）
頻率
DC 至 18 GHz
依圖客製 RF 線纜組件 的量產採購
面向量產的 依圖客製 RF 線纜組件，包含相容性審查、MOQ 建議與成本優化採購支援。
圖片
點擊圖片放大。
規格
| 最高頻率 | DC 至 18 GHz |
|---|---|
| Signal Performance 項目 | 1.3: 1 |
| Electrical Rating 項目 | 335 Vrms |
| 接點 Geometry | 0.91 in [23.11 mm] |
| Operating Temperature 項目 | -45 至 +120 deg C |
| Category 項目 | 同軸 連接器 |
| 產品類型 | 同軸 連接器 |
描述
FMAD1007 目前參考資料：DC 至 18 GHz。 頻率列為 DC 至 18 GHz。實際工作上限仍取決於組裝、配對件與應用情境。 高頻專案請在第一次 RFQ 中提供圖紙、線纜路徑與關鍵要求。 若此處缺少安裝資訊，請依圖紙或配對要求確認。 此頁用於 RFQ 前候選篩選，不作為最終核准依據。
可先用此頁建立 RFQ 前的候選清單。MOQ 200+ 客製生產與供應路徑，會在圖紙/規格/BOM 審查後確認；不預設現貨。
相似連接器
相關型號：
FGG.2T.310.KYCK10
T - Small Outdoor keyed Series connector; configuration: Crimp
FSMA-FSMA-B001
轉接器 F-SMA, MM, PC, simplex, metal, threaded
135104-07-12.00
RF Cable Assemblies SMA R/A Plug to Plug RG142 12in
LCCA30009-FT6
L-com Cable Assembly LCCA30009 is an SMA male to N female bulkhead 6 feet cable using 402SS Series coax that ships same-day. L-com's flexible RF cable assemblies are ideal for applications where tight bends and flexure are required. This L-com SMA to N cable assembly has a male to female gender configuration with 50 ohm flexible 402SS Series coax and operates to 18 GHz. Highly durable stainless-steel connectors and heavy-duty booting extend the life of this versatile flexible cable assembly. The double shield includes a silver plated copper braid over a silver plated copper spiral strip providing excellent shielding effectiveness greater than 110 dB. Custom versions of this cable assembly along with the rest of L-com's RF cable assemblies can be built and shipped same day. Other available RF cable assembly value added services include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for custom cable quotes.
LCCA30385-FT1
L-com low loss SMA male right angle to N female bulkhead cable assembly using 100 series coax, 1 FT is available for same day shipping from our facility. This high quality SMA cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30385-FT1 SMA cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF low loss coaxial cable assemblies are built with right angle SMA connection on one end and N bulkhead connection on the other. This low lossright angle SMA to N cable from L-com has a male to female gender combination. Our SMA male to N female coaxial assembly part number LCCA30385-FT1 can also be known as low loss right angle SMA plug to N jack cable assembly when using alternate gender names. SMA plug to N jack cable assembly LCCA30385-FT1 is manufactured with a flexible coax. These flexible SMA to N cable assemblies use 100 Series coax (CA-100 flexible) and are double shielded. L-com double shielded low loss SMA male right angle to N female bulkhead cable assembly using 100 series coax, 1 FT is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these SMA to N M/F cables is 3 GHz. Technical performance specifications on these 3 GHz SMA right angle male to N female bulkhead cables are located on the LCCA30385-FT1 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a low loss N female bulkhead to right angle SMA male cable assembly because it can be used in the opposite direction.Low loss SMA male right angle to N female bulkhead cable assembly using 100 series coax, 1 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our right angle SMA to N cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our low loss SMA male right angle to N female bulkhead cable assembly using 100 series coax, 1 FT.
LCCA30237-FT1.5
L-com's LCCA30237-FT1.5 is a low loss SMA male to BNC male cable assembly using LMR-200 coax, 1.5 FT with Times Microwave components and ships same-day. The LMR-200 coax of this SMA cable uses the PE (F) dielectric with a VoP of 83%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com SMA to BNC cable assembly has a male to male gender configuration with flexible LMR-200 series coax and operates to 5.8 GHz. The double shield of this SMA cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this SMA male to SMA male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30237-FT1.5 L-com Low Loss SMA Male to BNC Male Cable Assembly using LMR-200 Coax, 1.5 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
聲明
製造商名稱、商標、標誌與料號僅用於識別與交叉參照。Cstone Technology 是位於中國的經紀/分銷商與相容替代品出口採購夥伴，與原品牌沒有隸屬關係。商標屬於各自權利人。最終適配性會在 RFQ 階段透過圖紙/規格審查確認。