產品詳情
This N-Male to Reverse Polarity TNC Plug (RP-TNC) coaxial adapter provides the ability to connect between a N-Female and RP-TNC Jack interface. Interconnection of these interfaces is often found in test lab or in field environments where devices of differing interface types are interconnected.
料號(MPN)
阻抗
50 Ohm
頻率
DC
介面
N
依圖客製 RF 線纜組件 的量產採購
面向量產的 依圖客製 RF 線纜組件,包含相容性審查、MOQ 建議與成本優化採購支援。
圖片
點擊圖片放大。
規格
| 介面 | Coaxial Adapters |
|---|---|
| 介面 | N |
| 介面 | TNC |
| 阻抗 | 50 Ohm |
| 阻抗 | 50 Ohm |
| 最高頻率 | DC |
| 最高頻率 | 11 GHz |
| 公母 | Male |
| 公母 | Plug |
| Adapter Body Style | Straight |
| Connector Body Material 1 | Brass |
| Connector Body Material 2 | Brass |
顯示另外 9 項規格
| Connector Body Plating 1 | Nickel |
|---|---|
| Connector Body Plating 2 | Nickel |
| Connector Polarity 1 | Standard |
| Connector Polarity 2 | Reverse Polarity |
| 安裝方式 | None |
| 安裝方式 | None |
| Category | Coaxial Adapters |
| Application | Coax retrofit applications; Coaxial extension; Coaxial interface conversion; OEM coax applications |
| Product Features | Handy device to have on hand to solve your interconnection problems; Allows interconnection of devices with N-Female and RP-TNC Jack interfaces; Gold plated center contact for reduced signal loss; Nickel plated body for enhanced corrosion resistance |
描述
AXA-NMRTP 目前參考資料:N · 50 Ohm · DC。 阻抗列為 50 Ohm。若此參數很關鍵,請在 RFQ 中再次確認。 頻率列為 DC。實際工作上限仍取決於組裝、配對件與應用情境。 若此處缺少安裝資訊,請依圖紙或配對要求確認。 材料列為 Brass。這有助於審查,但不能取代對完整專案結構與材料配置的確認。 此頁用於 RFQ 前候選篩選,不作為最終核准依據。
可先用此頁建立 RFQ 前的候選清單。MOQ 200+ 客製生產與供應路徑,會在圖紙/規格/BOM 審查後確認;不預設現貨。
相似連接器
相關型號:
PE3W04293
MMCX Plug Right Angle to TNC Female Bulkhead Cable Using RG316 Coax
5225555-5
RF 連接器 / 同軸連接器 TNC 插頭 DUAL 帶 P TR
11_TNC-50-3-29/103_NE
RF 連接器 / 同軸連接器 TNC 直式 線纜 插頭 公頭
T80T90-142-
TNC 插座 至 TNC 反向極性 插座 using RG142
T39T85-141S-
TNC 插頭 直角 至 TNC 插座 bulkhead using .141 conformable
PE3W12245-HS
TNC Male Right Angle to TNC Female Bulkhead Low Loss Cable Using LMR-100 Coax with HeatShrink
聲明
製造商名稱、商標、標誌與料號僅用於識別與交叉參照。Cstone Technology 是位於中國的經紀/分銷商與相容替代品出口採購夥伴,與原品牌沒有隸屬關係。商標屬於各自權利人。最終適配性會在 RFQ 階段透過圖紙/規格審查確認。