CSTONE
Danh sách RFQ

Chi tiết sản phẩm

Our RF Adapter Series offers Straight series connectors in: 1.85mm, 2.40mm, 2.92mm, 3.50mm, N Type, SMA, TNC, BNC, APC-7, Flange Mount and Right Angle. The RF Adapters are used to transfer signals from one connector interface to another.

Giải pháp thay thế tương thích từ Trung Quốc — chúng tôi xác nhận độ phù hợp theo bản vẽ/đặc tả.

Mã linh kiện (MPN)

RFAANJNJ

Trở kháng

50Ohm

cụm cáp RF tùy chỉnh từ bản vẽ cho sourcing sản xuất

cụm cáp RF tùy chỉnh từ bản vẽ định hướng sản xuất với review tương thích, hướng dẫn MOQ và hỗ trợ sourcing giảm chi phí.

Cáp RF tùy chỉnh theo bản vẽ →
WhatsApp — Phản hồi nhanh
Thời gian giao hàng: 3–6 tuần | MOQ: 200+ chiếc
Chuẩn bị gì trước khi gửi RFQ Dữ liệu đầu vào rõ ràng giảm phỏng đoán và tăng tốc phản hồi hữu ích.
  • Chia sẻ MPN tham chiếu, linh kiện ghép nối hoặc thương hiệu gốc nếu liên quan đến việc rà soát.
  • Thêm BOM, phân bổ số lượng và nhu cầu hằng năm nếu dự án vượt giai đoạn mẫu thử.
  • Đính kèm bản vẽ, bảng dữ liệu hoặc yêu cầu quan trọng về trở kháng, tần số, lắp đặt và mạ.

Hình ảnh

Bấm để phóng to.

Hình ảnh sản phẩm

RFAANJNJ product photo

RFAANJNJ product photo

1 / 3

Specifications

Specifications for RFAANJNJ
Giao diệnRF Connectors
Giao diệnRF Adapter Series
Trở kháng50Ohm
Body MaterialStainless Steel Passivation
Đầu nối kết thúcBeryllium Copper
Cấp bảo vệ IPN Jack to N Jack RF Adapter
Maximum Voltage500V
Temperature range-40°C to +85°C
Frecuency range0GHz - 18GHz
VSWR<1.15
Dielectric withstanding Voltage>1500V
CategoryRF Connectors
Show 8 more specs
Product FeaturesRF Adapter Series N Type Straight; range_code: RFAAN Range
Part NumberRFAANJNJ
LifecycleNew From This Manufacturer
DeliveryDHL、UPS、FedEx、Registered Mail
PaymentT/T Paypal Visa MoneyGram Western Union
More InformationRFAANJNJ More Information
ECADRequest Free CAD Models
Model NumberRFAANJNJ

Mô tả

Dữ liệu tham chiếu hiện có cho RFAANJNJ: 50Ohm. Trở kháng được ghi là 50Ohm. Nếu đây là thông số quan trọng, hãy xác nhận lại trong RFQ. Nếu thiếu thông tin lắp đặt tại đây, hãy xác nhận theo bản vẽ hoặc yêu cầu ghép nối. Vật liệu được ghi là Stainless Steel Passivation. Thông tin này hữu ích cho rà soát, nhưng không thay thế việc xác nhận toàn bộ kết cấu dự án. Trang này dùng để lọc sơ bộ trước RFQ, không phải căn cứ phê duyệt cuối cùng.

Dùng trang này để lọc ứng viên trước RFQ. Chuỗi cung ứng và lộ trình sản xuất tùy chỉnh MOQ 200+ được xác nhận sau khi rà soát bản vẽ/thông số/BOM.

Đầu nối tương tự

Bạn cũng có thể quan tâm đến các model này:

4-Core FO OM3 LC-ST

This product is an optical fiber cable pre-terminated with optical connectors. The standard cable color varies depending on the fiber mode. This is a 4-core (Fan-out) cable, multimode (OM3), with LC-ST connectors.Example model: TFC-4C-OM3-LC-ST-1m-FYou can select the fiber count (1-core/2-core/4-core), mode (single-mode (SM) / multimode (OM1–OM5), and connector type (SC/LC/ST/FC/MU/SMA905), and specify the overall length. Please refer to the specifications.Delivery is typically 2 to 5 weeks after order placement. Please contact us for details.

Xem chi tiết →

CAB.S02

RF Cụm cáp SMA(F) đến IPEX MHF4 .81 200 mm

Xem chi tiết →

PE3C4045

Snap-On MMBX Plug Right Angle to SMA Male Right Angle Cable Using RG174 Coax

Xem chi tiết →

ATS-1M1F-01DB2W

Attenuators - Interconnects SMA jack đến SMAPlug Attenuator, 1 dB, 2W

Xem chi tiết →

A60T90-L100-

SMA Đảo cực phích cắm đến TNC Đảo cực jack using JBY100

Xem chi tiết →

LCCA30235-FT1.5

L-com's LCCA30235-FT1.5 is a low loss SMA male to reverse polarity TNC female cable assembly using LMR-200 coax, 1.5 FT with Times Microwave components and ships same-day. The LMR-200 coax of this SMA cable uses the PE (F) dielectric with a VoP of 83%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com SMA to TNC cable assembly has a male to female gender configuration with flexible LMR-200 series coax and operates to 5.8 GHz. The double shield of this SMA cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this SMA male to SMA female cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30235-FT1.5 L-com Low Loss SMA Male to Reverse Polarity TNC Female Cable Assembly using LMR-200 Coax, 1.5 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.

Xem chi tiết →
Tìm MPN Hỗ trợ khớp chính xác, tiền tố và một phần.

Hỗ trợ khớp chính xác, tiền tố và một phần.

Tuyên bố miễn trừ

Cstone là nhà máy chuyên nghiệp, không phải công ty thương mại, sản xuất đầu nối RF và đồng trục, adapter và cụm cáp gồm N-type, BNC, SMA, SMP, SSMB và MMCX. Chúng tôi sản xuất đầu nối theo bản vẽ 2D hoặc mẫu; độ phù hợp, MOQ, thời gian giao hàng và chi tiết sản xuất được xác nhận qua RFQ. Cstone Technology không liên kết với các thương hiệu gốc. Tên nhà sản xuất, thương hiệu, biểu tượng và số linh kiện chỉ được sử dụng để nhận dạng và đối chiếu. Thương hiệu vẫn thuộc về chủ sở hữu tương ứng. Sự phù hợp cuối cùng được xác nhận qua kiểm tra bản vẽ/thông số kỹ thuật trong quá trình RFQ.