CSTONE
Danh sách RFQ

Chi tiết sản phẩm

SMA Male Connector Field Replaceable Attachment 4 Hole Flange 0.036 inch Pin, .375 inch Flange Size

Giải pháp thay thế tương thích từ Trung Quốc — chúng tôi xác nhận độ phù hợp theo bản vẽ/đặc tả.

Mã linh kiện (MPN)

PE44009

Trở kháng

50 Ohm

Giao diện

SMA

cụm cáp RF tùy chỉnh từ bản vẽ cho sourcing sản xuất

cụm cáp RF tùy chỉnh từ bản vẽ định hướng sản xuất với review tương thích, hướng dẫn MOQ và hỗ trợ sourcing giảm chi phí.

Cáp RF tùy chỉnh theo bản vẽ →
WhatsApp — Phản hồi nhanh
Thời gian giao hàng: 3–6 tuần | MOQ: 200+ chiếc
Chuẩn bị gì trước khi gửi RFQ Dữ liệu đầu vào rõ ràng giảm phỏng đoán và tăng tốc phản hồi hữu ích.
  • Chia sẻ MPN tham chiếu, linh kiện ghép nối hoặc thương hiệu gốc nếu liên quan đến việc rà soát.
  • Thêm BOM, phân bổ số lượng và nhu cầu hằng năm nếu dự án vượt giai đoạn mẫu thử.
  • Đính kèm bản vẽ, bảng dữ liệu hoặc yêu cầu quan trọng về trở kháng, tần số, lắp đặt và mạ.

Hình ảnh

Bấm để phóng to.

Hình ảnh sản phẩm

PE44009 product photo

PE44009 product photo

Specifications

Specifications for PE44009
Giao diện.036 inch Pin
Giao diệnConnectors
Giao diệnSMA
Trở kháng50 Ohm
Giới tính đầu nốiMale
Body StyleStraight
PolarityStandard
Attachment MethodField Replaceable
Kiểu lắp4 Hole Flange
CategoryConnectors

Mô tả

Dữ liệu tham chiếu hiện có cho PE44009: SMA · 50 Ohm · 4 Hole Flange. Trở kháng được ghi là 50 Ohm. Nếu đây là thông số quan trọng, hãy xác nhận lại trong RFQ. Kiểu lắp đặt được ghi là 4 Hole Flange. Nếu có giới hạn về panel, lắp xuyên vách hoặc mặt bích, hãy gửi kích thước cùng RFQ. Trang này dùng để lọc sơ bộ trước RFQ, không phải căn cứ phê duyệt cuối cùng.

Dùng trang này để lọc ứng viên trước RFQ. Chuỗi cung ứng và lộ trình sản xuất tùy chỉnh MOQ 200+ được xác nhận sau khi rà soát bản vẽ/thông số/BOM.

Đầu nối tương tự

Bạn cũng có thể quan tâm đến các model này:

9002-1033-006

SMA / thẳng jack cái hàn loại cho 5 / 50 S vàng NON-CAPTIVE tiếp điểm

Xem chi tiết →

ADS-A8-2.4-8-27-1.2

SMA jack đến 2.4 mm jack 27 GHz VSWR1.2

Xem chi tiết →

FMAD1716

Low PIM NEX10 Female (Jack) to SMA Female (Jack) Bulkhead Adapter

Xem chi tiết →

M3933/25-62S

Attenuators - Interconnects SMA QPL ATT SCREENED

Xem chi tiết →

FMCN5204

SMA Female Commercial Grade PCB Connector .063 inch End Launch Solder Attachment High Temp

Xem chi tiết →

LCCA30712-6IN

L-com test probe SMA female 4 hole flange to straight cut lead cable assembly using LC047TB coax is available for same day shipping from our facility. This high quality SMA cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30712 SMA cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF test probe coaxial cable assemblies are built with SMA 4 hole flange connection on one end and Straight Cut Lead connection on the other. This test probe SMA to Straight Cut Lead cable from L-com has a female to sexless gender combination. Our SMA female to Straight Cut Lead sexless coaxial assembly part number LCCA30712 can also be known as test probe SMA jack to Straight Cut Lead sexless cable assembly when using alternate gender names. SMA jack to Straight Cut Lead sexless cable assembly LCCA30712 is manufactured with a formable coax. These formable SMA to Straight Cut Lead cable assemblies use LC047TB coax and are single shielded. L-com single shielded test probe SMA female 4 hole flange to straight cut lead cable assembly using LC047TB coax is built from quality components by skilled assemblers with many years of experience. Technical performance specifications on these SMA female4 hole flange to Straight Cut Lead sexless cables are located on the LCCA30712 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a test probe Straight Cut Lead sexless to SMA female 4 hole flange cable assembly because it can be used in the opposite direction.Test probe SMA female 4 hole flange to straight cut lead cable assembly using LC047TB coax is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our SMA to Straight Cut Lead cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our test probe SMA female 4 hole flange to straight cut lead cable assembly using LC047TB coax.

Xem chi tiết →
Tìm MPN Hỗ trợ khớp chính xác, tiền tố và một phần.

Hỗ trợ khớp chính xác, tiền tố và một phần.

Tuyên bố miễn trừ

Cstone là nhà máy chuyên nghiệp, không phải công ty thương mại, sản xuất đầu nối RF và đồng trục, adapter và cụm cáp gồm N-type, BNC, SMA, SMP, SSMB và MMCX. Chúng tôi sản xuất đầu nối theo bản vẽ 2D hoặc mẫu; độ phù hợp, MOQ, thời gian giao hàng và chi tiết sản xuất được xác nhận qua RFQ. Cstone Technology không liên kết với các thương hiệu gốc. Tên nhà sản xuất, thương hiệu, biểu tượng và số linh kiện chỉ được sử dụng để nhận dạng và đối chiếu. Thương hiệu vẫn thuộc về chủ sở hữu tương ứng. Sự phù hợp cuối cùng được xác nhận qua kiểm tra bản vẽ/thông số kỹ thuật trong quá trình RFQ.