Chi tiết sản phẩm
SMA Female to SMA Male Cable Using RG223 Coax
Mã linh kiện (MPN)
Trở kháng
50 Ohm
Giao diện
SMA
cụm cáp RF tùy chỉnh từ bản vẽ cho sourcing sản xuất
cụm cáp RF tùy chỉnh từ bản vẽ định hướng sản xuất với review tương thích, hướng dẫn MOQ và hỗ trợ sourcing giảm chi phí.
Chuẩn bị gì trước khi gửi RFQ Dữ liệu đầu vào rõ ràng giảm phỏng đoán và tăng tốc phản hồi hữu ích. ⌄
- • Chia sẻ MPN tham chiếu, linh kiện ghép nối hoặc thương hiệu gốc nếu liên quan đến việc rà soát.
- • Thêm BOM, phân bổ số lượng và nhu cầu hằng năm nếu dự án vượt giai đoạn mẫu thử.
- • Đính kèm bản vẽ, bảng dữ liệu hoặc yêu cầu quan trọng về trở kháng, tần số, lắp đặt và mạ.
Hình ảnh
Bấm để phóng to.
Specifications
| Giao diện | Cable Assemblies |
|---|---|
| Giao diện | RG223 |
| Giao diện | SMA |
| Giao diện | SMA |
| Trở kháng | 50 Ohm |
| Trở kháng | 50 Ohm |
| Trở kháng | 50 Ohm |
| Giới tính đầu nối | Female |
| Giới tính đầu nối | Male |
| Hướng | Straight |
| Hướng | Straight |
| Connector 1 Body Material | Brass |
Show 5 more specs
| Connector 1 Body Plating | Nickel |
|---|---|
| Connector 1 Polarity | Standard |
| Connector 2 Polarity | Standard |
| Loại cáp | RG223/U |
| Category | Cable Assemblies |
Mô tả
Dữ liệu tham chiếu hiện có cho PE3W04538: SMA · 50 Ohm · Straight. Danh mục hiện ghi cấu hình là: Straight. Trở kháng được ghi là 50 Ohm. Nếu đây là thông số quan trọng, hãy xác nhận lại trong RFQ. Nếu thiếu thông tin lắp đặt tại đây, hãy xác nhận theo bản vẽ hoặc yêu cầu ghép nối. Vật liệu được ghi là Brass. Thông tin này hữu ích cho rà soát, nhưng không thay thế việc xác nhận toàn bộ kết cấu dự án. Trang này dùng để lọc sơ bộ trước RFQ, không phải căn cứ phê duyệt cuối cùng.
Dùng trang này để lọc ứng viên trước RFQ. Chuỗi cung ứng và lộ trình sản xuất tùy chỉnh MOQ 200+ được xác nhận sau khi rà soát bản vẽ/thông số/BOM.
Đầu nối tương tự
Bạn cũng có thể quan tâm đến các model này:
415-0034-MM150
RF Cụm cáp R Ang SMA phích cắm đến thẳng SMA phích cắm
LCCA30294-FT1.5
L-com's LCCA30294-FT1.5 is a low loss TNC male right angle to SMA male cable assembly using LMR-400 coax, 1.5 FT with Times Microwave components and ships same-day. The LMR-400 coax of this TNC cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com TNC to SMA cable assembly has a male to male gender configuration with flexible LMR-400 series coax and operates to 6 GHz. The double shield of this TNC cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. This right angle TNC cable interface on the LMR-400 coax allows for easier connections in tight spaces. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this TNC male to TNC male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30294-FT1.5 L-com Low Loss TNC Male Right Angle to SMA Male Cable Assembly using LMR-400 Coax, 1.5 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
LCCA30260/WP-FT5
The L-com LCCA30260/WP-FT5 is a weatherproof low loss cable assembly that comes with SMA male connection with weatherproof boot on one end and TNC male on the other. L-com’s RF coaxial cable assembly products are designed for typical use, production, laboratory test and measurement, defense/military, aerial antenna towers, etc. The low loss cable has a 50 Ohm impedance and is specifically ready for quicker shipment than most in the industry can provide.This weatherproof low loss RF cable assembly operates at a maximum frequency of 6 GHz. Our RF cable assembly has a PE jacket with 0.240 inches diameter. The SMA male to TNC male cable assembly LCCA30260/WP-FT5 is built with LMR-240 coax, which has a flexible design.This RF cable assembly with 0.5 inches diameter has copper as cable’s inner conducting material and PE (F) dielectric type. The weatherproof boot low loss cable is reusable and can withstand elements including extreme temperature. Additional dimensions, specifications, and CAD drawings for this LCCA30260/WP-FT5 low loss RF cable are available on our downloadable PDF datasheet.L-com stocks a wide selection of weatherproof low loss cable assemblies that ship the same business day as ordered from our warehouse. Make your online purchase right now to take advantage of our same-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal SMA male to TNC male cable assembly as per your requirements.
CA-RTPNFA004
High quality fully tested Reverse Polarity SMA Jack to Reverse Polarity TNC Plug cable assemblies featuring high performance low loss 195-series coax cable. Not exactly what you are looking for? Build your own cable assembly with our Custom Product Configurator. Not sure what connector your radio has. Use our Radio to Connector-Type Cross-Reference.
PE91453
SMA Male to SMA Female 4 Hole Flange Mount Adapter
SMA8404C-0000
SMA jack Gắn PCB bulkhead end launch (T=2.3) với round tiếp điểm (0.78L=4.7) 18 GHz VSWR1.2
Tìm MPN Hỗ trợ khớp chính xác, tiền tố và một phần. ⌄
Tuyên bố miễn trừ
Tên nhà sản xuất, thương hiệu, biểu tượng và số linh kiện chỉ được sử dụng để nhận dạng và đối chiếu. Cstone Technology là đối tác cung ứng xuất khẩu tại Trung Quốc cho các giải pháp thay thế tương thích và không liên kết với các thương hiệu gốc. Thương hiệu vẫn thuộc về chủ sở hữu tương ứng. Sự phù hợp cuối cùng được xác nhận qua kiểm tra bản vẽ/thông số kỹ thuật trong quá trình RFQ.