Chi tiết sản phẩm
SMA Female Bulkhead to MMCX Plug Right Angle Cable Using RG405 Coax
Mã linh kiện (MPN)
Trở kháng
50 Ohm
Giao diện
SMA
cụm cáp RF tùy chỉnh từ bản vẽ cho sourcing sản xuất
cụm cáp RF tùy chỉnh từ bản vẽ định hướng sản xuất với review tương thích, hướng dẫn MOQ và hỗ trợ sourcing giảm chi phí.
Chuẩn bị gì trước khi gửi RFQ Dữ liệu đầu vào rõ ràng giảm phỏng đoán và tăng tốc phản hồi hữu ích. ⌄
- • Chia sẻ MPN tham chiếu, linh kiện ghép nối hoặc thương hiệu gốc nếu liên quan đến việc rà soát.
- • Thêm BOM, phân bổ số lượng và nhu cầu hằng năm nếu dự án vượt giai đoạn mẫu thử.
- • Đính kèm bản vẽ, bảng dữ liệu hoặc yêu cầu quan trọng về trở kháng, tần số, lắp đặt và mạ.
Hình ảnh
Bấm để phóng to.
Specifications
| Giao diện | Cable Assemblies |
|---|---|
| Giao diện | RG405 |
| Giao diện | SMA |
| Giao diện | MMCX |
| Trở kháng | 50 Ohm |
| Trở kháng | 50 Ohm |
| Trở kháng | 50 Ohm |
| Giới tính đầu nối | Female |
| Giới tính đầu nối | Plug |
| Hướng | Straight |
| Hướng | Right Angle |
| Connector 1 Body Material | Brass |
Show 6 more specs
| Connector 1 Body Plating | Gold |
|---|---|
| Connector 1 Polarity | Standard |
| Kiểu lắp | Bulkhead |
| Connector 2 Polarity | Standard |
| Loại cáp | RG405/U |
| Category | Cable Assemblies |
Mô tả
Dữ liệu tham chiếu hiện có cho PE3W00171: SMA · 50 Ohm · Bulkhead. Danh mục hiện ghi cấu hình là: Straight. Trở kháng được ghi là 50 Ohm. Nếu đây là thông số quan trọng, hãy xác nhận lại trong RFQ. Kiểu lắp đặt được ghi là Bulkhead. Nếu có giới hạn về panel, lắp xuyên vách hoặc mặt bích, hãy gửi kích thước cùng RFQ. Vật liệu được ghi là Brass. Thông tin này hữu ích cho rà soát, nhưng không thay thế việc xác nhận toàn bộ kết cấu dự án. Trang này dùng để lọc sơ bộ trước RFQ, không phải căn cứ phê duyệt cuối cùng.
Dùng trang này để lọc ứng viên trước RFQ. Chuỗi cung ứng và lộ trình sản xuất tùy chỉnh MOQ 200+ được xác nhận sau khi rà soát bản vẽ/thông số/BOM.
Đầu nối tương tự
Bạn cũng có thể quan tâm đến các model này:
100746-ES-F-N-12-AF
RF Cụm cáp SNGLE END với cáp .20 CTR 12 SMA FM
LCCA30166-FT1.5
L-com's LCCA30166-FT1.5 is a low loss SMA male to SMA male cable assembly using LMR-200 coax, 1.5 FT with Times Microwave components and ships same-day. The LMR-200 coax of this SMA cable uses the PE (F) dielectric with a VoP of 83%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com SMA to SMA cable assembly has a male to male gender configuration with flexible LMR-200 series coax and operates to 5.8 GHz. The double shield of this SMA cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this SMA male to SMA male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30166-FT1.5 L-com Low Loss SMA Male to SMA Male Cable Assembly using LMR-200 Coax, 1.5 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
A60T85-58-
SMA Đảo cực phích cắm đến TNC jack bulkhead using RG58
9131-1573-006
SMA / thẳng jack cái bấm loại cho 5 / 50 S vàng CAPTIVE tiếp điểm
LCCA30293/WP-FT2
The L-com LCCA30293/WP-FT2 is a weatherproof low loss cable assembly that comes with SMA male connection with weatherproof boot on one end and TNC male with weatherproof boot on the other. L-com’s RF coaxial cable assembly products are designed for typical use, production, laboratory test and measurement, defense/military, aerial antenna towers, etc. The low loss cable has a 50 Ohm impedance and is specifically ready for quicker shipment than most in the industry can provide.This weatherproof low loss RF cable assembly operates at a maximum frequency of 6 GHz. Our RF cable assembly has a PE jacket with 0.405 inches diameter. The SMA male to TNC male cable assembly LCCA30293/WP-FT2 is built with LMR-400 coax, which has a flexible design.This RF cable assembly with 0.5 inches diameter has copper clad aluminum as cable’s inner conducting material and PE (F) dielectric type. The weatherproof boot low loss cable can operate at a temperature range of -40 to 85 degrees C. Additional dimensions, specifications, and CAD drawings for this LCCA30293/WP-FT2 low loss RF cable are available on our downloadable PDF datasheet.L-com stocks a wide selection of weatherproof low loss cable assemblies that ship the same business day as ordered from our warehouse. Make your online purchase right now to take advantage of our same-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal SMA male to TNC male cable assembly as per your requirements.
PE3W04533
Reverse Polarity SMA Plug to N Male Right Angle Low Loss Cable Using LMR-195 Coax
Tìm MPN Hỗ trợ khớp chính xác, tiền tố và một phần. ⌄
Tuyên bố miễn trừ
Cstone là nhà máy chuyên nghiệp, không phải công ty thương mại, sản xuất đầu nối RF và đồng trục, adapter và cụm cáp gồm N-type, BNC, SMA, SMP, SSMB và MMCX. Chúng tôi sản xuất đầu nối theo bản vẽ 2D hoặc mẫu; độ phù hợp, MOQ, thời gian giao hàng và chi tiết sản xuất được xác nhận qua RFQ. Cstone Technology không liên kết với các thương hiệu gốc. Tên nhà sản xuất, thương hiệu, biểu tượng và số linh kiện chỉ được sử dụng để nhận dạng và đối chiếu. Thương hiệu vẫn thuộc về chủ sở hữu tương ứng. Sự phù hợp cuối cùng được xác nhận qua kiểm tra bản vẽ/thông số kỹ thuật trong quá trình RFQ.