Chi tiết sản phẩm
4.1/9.5 Mini DIN Male to Snap-On 4.3-10 Male Low PIM Cable Using TFT-402 Coax Using Times Microwave Components
Mã linh kiện (MPN)
Trở kháng
50 Ohm
Giao diện
4.1/9.5 Mini DIN
cụm cáp RF tùy chỉnh từ bản vẽ cho sourcing sản xuất
cụm cáp RF tùy chỉnh từ bản vẽ định hướng sản xuất với review tương thích, hướng dẫn MOQ và hỗ trợ sourcing giảm chi phí.
Chuẩn bị gì trước khi gửi RFQ Dữ liệu đầu vào rõ ràng giảm phỏng đoán và tăng tốc phản hồi hữu ích. ⌄
- • Chia sẻ MPN tham chiếu, linh kiện ghép nối hoặc thương hiệu gốc nếu liên quan đến việc rà soát.
- • Thêm BOM, phân bổ số lượng và nhu cầu hằng năm nếu dự án vượt giai đoạn mẫu thử.
- • Đính kèm bản vẽ, bảng dữ liệu hoặc yêu cầu quan trọng về trở kháng, tần số, lắp đặt và mạ.
Hình ảnh
Bấm để phóng to.
Specifications
| Giao diện | Cable Assemblies |
|---|---|
| Giao diện | TFT-402 |
| Giao diện | 4.1/9.5 Mini DIN |
| Giao diện | 4.3-10 |
| Trở kháng | 50 Ohm |
| Trở kháng | 50 Ohm |
| Trở kháng | 50 Ohm |
| Giới tính đầu nối | Male |
| Giới tính đầu nối | Male |
| Hướng | Straight |
| Hướng | Straight |
| Connector Polarity 1 | Standard |
Show 5 more specs
| Kiểu lắp | None |
|---|---|
| Connector Polarity 2 | Standard |
| Kiểu lắp | None |
| Loại cáp | TFT-402 |
| Category | Cable Assemblies |
Mô tả
Dữ liệu tham chiếu hiện có cho PE3C8228: 4.1/9.5 Mini DIN · 50 Ohm · Straight. Danh mục hiện ghi cấu hình là: Straight. Trở kháng được ghi là 50 Ohm. Nếu đây là thông số quan trọng, hãy xác nhận lại trong RFQ. Nếu thiếu thông tin lắp đặt tại đây, hãy xác nhận theo bản vẽ hoặc yêu cầu ghép nối. Trang này dùng để lọc sơ bộ trước RFQ, không phải căn cứ phê duyệt cuối cùng.
Dùng trang này để lọc ứng viên trước RFQ. Chuỗi cung ứng và lộ trình sản xuất tùy chỉnh MOQ 200+ được xác nhận sau khi rà soát bản vẽ/thông số/BOM.
Đầu nối tương tự
Bạn cũng có thể quan tâm đến các model này:
CADIN1EI
Đầu nối mô-đun / Đầu nối Ethernet DIN rail lắp Adapt với LBL singl
LC3MSA00225-36
The L-com LC3MSA00225-36 MIL-STD-1553 flexible RF cable assembly is perfect for applications that need tight bends and flexible cable. This TRB 3-slot to blunt cut cable assembly is plug to blunt cut and made of 78 ohm flexible TWCH-78-2-LC twinax. Our 78 Ohm cable assembly is available with a HF POF jacket and a copper inner conductor with silver plating. We offer a blue, 0.57-inch OD TRB 3-slot to blunt cut cable that operates at 500 MHz.This blue RF cable assembly is the most commonly utilized cable assembly in wide connectivity applications such as bus couplers, avionics control boxes, and bus relay. L-com's LC3MSA00225-36 MIL-STD-1553 flexible RF cable assembly is available with PE dielectric. Our TRB 3-slot plug to blunt cut cable has bayonet coupling connectors made of brass with nickel plating. This RF flexible TWCH-78-2-LC twinax cable operates between -30 and 80 degrees Celsius.L-com has one of the largest in-stock selections of MIL-STD-1553 flexible RF cable assembly with same-day shipment for domestic and international orders. We are a global leader of wired and wireless connectivity products, offering a wide range of solutions across many key industries, including electronics, medical, industrial automation, military, and telecommunication. For further information on similar products, our expert technical support and trained sales team can get you the perfect TRB 3-slot plug to blunt cut cable as per your requirements.
ST0643
7/16 DIN Female (Jack) Termination (Load) 2 Watts To 7.5 GHz, Tri-Metal Plated Brass, 1.3 VSWR
1210641545
Circular DIN đầu nối 18 mm DIN ATTACH 2P+GRD 12V RED LED
CA4NFLPNM004
The CA4NFLPNF series are high performance low loss 400-series cable assemblies that feature a N-Female connector to an in-line N-Male gas discharge tube lightning protector attached directly to the cable. This not only reduces the cost since a connector is eliminated, but helps reduce return loss and insertion loss. These cable assemblies feature L-com's CA-400 which is a UV resistant polyethylene jacketed high performance flexible low loss coaxial cable. Attached directly to the cable is L-com's AL6-NM-14-9 5.8 GHz coaxial lightning protector. With a replaceable gas tube element, multi-strike capability and fast response time, they are suitable for a wide range of applications. A ground lug and terminal is provided directly on the lightning protector housing, which provides superior grounding. Custom lengths and connectors are also available. Contact L-com sales for more information. For additional information and complete specification, please see the data sheet in the Downloads section. Note: The lightning protector can also be purchased separately, see AL6-NM-14-9.
L717SDC37P1ACO3FC309
Đầu nối D-Sub tiêu chuẩn D-SUB, Stamped Signal 3A, Góc vuông PCB Xuyên lỗ, FP=10.40 mm (.409in), Row Pitch 2.54 mm, 37 chân, 0.76 m (30 in) vàng, Bright thiếc Shell+Grounding Dimples, M3 Front Screwlock, Ground Tab với Clear Hole không có Boardlock
Tìm MPN Hỗ trợ khớp chính xác, tiền tố và một phần. ⌄
Tuyên bố miễn trừ
Tên nhà sản xuất, thương hiệu, biểu tượng và số linh kiện chỉ được sử dụng để nhận dạng và đối chiếu. Cstone Technology là đối tác cung ứng xuất khẩu tại Trung Quốc cho các giải pháp thay thế tương thích và không liên kết với các thương hiệu gốc. Thương hiệu vẫn thuộc về chủ sở hữu tương ứng. Sự phù hợp cuối cùng được xác nhận qua kiểm tra bản vẽ/thông số kỹ thuật trong quá trình RFQ.