CSTONE
Danh sách RFQ

Chi tiết sản phẩm

SMA Female Bulkhead to SMA Male Cable Using PE-SR402FL Coax

Giải pháp thay thế tương thích từ Trung Quốc — chúng tôi xác nhận độ phù hợp theo bản vẽ/đặc tả.

Mã linh kiện (MPN)

PE3468

Trở kháng

50

Giao diện

SMA

cụm cáp RF tùy chỉnh từ bản vẽ cho sourcing sản xuất

cụm cáp RF tùy chỉnh từ bản vẽ định hướng sản xuất với review tương thích, hướng dẫn MOQ và hỗ trợ sourcing giảm chi phí.

Cáp RF tùy chỉnh theo bản vẽ →
WhatsApp — Phản hồi nhanh
Thời gian giao hàng: 3–6 tuần | MOQ: 200+ chiếc
Chuẩn bị gì trước khi gửi RFQ Dữ liệu đầu vào rõ ràng giảm phỏng đoán và tăng tốc phản hồi hữu ích.
  • Chia sẻ MPN tham chiếu, linh kiện ghép nối hoặc thương hiệu gốc nếu liên quan đến việc rà soát.
  • Thêm BOM, phân bổ số lượng và nhu cầu hằng năm nếu dự án vượt giai đoạn mẫu thử.
  • Đính kèm bản vẽ, bảng dữ liệu hoặc yêu cầu quan trọng về trở kháng, tần số, lắp đặt và mạ.

Hình ảnh

Bấm để phóng to.

Hình ảnh sản phẩm

PE3468 product photo

PE3468 product photo

Specifications

Specifications for PE3468
Giao diệnCable Assemblies
Giao diệnPE-SR402FL
Giao diệnSMA
Giao diệnSMA
Trở kháng50
Trở kháng50
Trở kháng50
Giới tính đầu nốiFemale
Giới tính đầu nốiMale
HướngStraight
HướngStraight
Connector Polarity 1Standard
Show 5 more specs
Kiểu lắpBulkhead
Connector Polarity 2Standard
Kiểu lắpNone
Loại cápPE-SR402FL
CategoryCable Assemblies

Mô tả

Dữ liệu tham chiếu hiện có cho PE3468: SMA · 50 · Bulkhead. Danh mục hiện ghi cấu hình là: Straight. Trở kháng được ghi là 50. Nếu đây là thông số quan trọng, hãy xác nhận lại trong RFQ. Kiểu lắp đặt được ghi là Bulkhead. Nếu có giới hạn về panel, lắp xuyên vách hoặc mặt bích, hãy gửi kích thước cùng RFQ. Trang này dùng để lọc sơ bộ trước RFQ, không phải căn cứ phê duyệt cuối cùng.

Dùng trang này để lọc ứng viên trước RFQ. Chuỗi cung ứng và lộ trình sản xuất tùy chỉnh MOQ 200+ được xác nhận sau khi rà soát bản vẽ/thông số/BOM.

Đầu nối tương tự

Bạn cũng có thể quan tâm đến các model này:

LCCA30567-FT5

L-com SMA female bulkhead to TNC male right angle cable assembly using LC085TB coax, 5 FT is available for same day shipping from our facility. This high quality SMA cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30567-FT5 SMA cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF coaxial cable assemblies are built with SMA bulkhead connection on one end and right angle TNC connection on the other. This SMA to right angle TNC cable from L-com has a female to male gender combination. Our SMA female to TNC male coaxial assembly part number LCCA30567-FT5 can also be known as SMA jack to right angle TNC plug cable assembly when using alternate gender names. SMA jack to TNC plug cable assembly LCCA30567-FT5 is manufactured with a formable coax. These formable SMA to TNC cable assemblies use LC085TB coax and are single shielded. L-com single shielded SMA female bulkhead to TNC male right angle cable assembly using LC085TB coax, 5 FT is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these SMA to TNC F/M cables is 6 GHz. Technical performance specifications on these 6 GHz SMA femalebulkhead to TNC right angle male cables are located on the LCCA30567-FT5 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a right angle TNC male to SMA female bulkhead cable assembly because it can be used in the opposite direction.SMA female bulkhead to TNC male right angle cable assembly using LC085TB coax, 5 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our SMA to right angle TNC cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our SMA female bulkhead to TNC male right angle cable assembly using LC085TB coax, 5 FT.

Xem chi tiết →

SMA3100-0214

SMA plug crimp for RG214; 6GHz VSWR1.25

Xem chi tiết →

33_SMA-N-50-51/1--_NE

Bộ chuyển đổi RF - khác dòng SMA plug(m) đến N jack(f)

Xem chi tiết →

CA-QPSFA010

High quality fully tested QMA Plug to SMA Female cable assemblies featuring high performance low loss 195-series coax cable. QMA connectors are a "quick disconnect" version of a SMA connectors. They share the same internal construction as SMA connectors. Not exactly what you are looking for? Build your own cable assembly with our Custom Product Configurator. Not sure what connector your radio has. Use our Radio to Connector-Type Cross-Reference.

Xem chi tiết →

095-902-475M050

RF Cụm cáp SMA SP đến SMA SP on LMR-195 Cbl .5M

Xem chi tiết →

LCCA30311-FT3

L-com's LCCA30311-FT3 is a low loss N female to SMA male cable assembly using LMR-400-DB coax, 3 FT with Times Microwave components and ships same-day. The LMR-400-DB coax of this N cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to SMA cable assembly has a female to male gender configuration with flexible LMR-400-DB series coax and operates to 6 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N female to N male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30311-FT3 L-com Low Loss N Female to SMA Male Cable Assembly using LMR-400-DB Coax, 3 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.

Xem chi tiết →
Tìm MPN Hỗ trợ khớp chính xác, tiền tố và một phần.

Hỗ trợ khớp chính xác, tiền tố và một phần.

Tuyên bố miễn trừ

Cstone là nhà máy chuyên nghiệp, không phải công ty thương mại, sản xuất đầu nối RF và đồng trục, adapter và cụm cáp gồm N-type, BNC, SMA, SMP, SSMB và MMCX. Chúng tôi sản xuất đầu nối theo bản vẽ 2D hoặc mẫu; độ phù hợp, MOQ, thời gian giao hàng và chi tiết sản xuất được xác nhận qua RFQ. Cstone Technology không liên kết với các thương hiệu gốc. Tên nhà sản xuất, thương hiệu, biểu tượng và số linh kiện chỉ được sử dụng để nhận dạng và đối chiếu. Thương hiệu vẫn thuộc về chủ sở hữu tương ứng. Sự phù hợp cuối cùng được xác nhận qua kiểm tra bản vẽ/thông số kỹ thuật trong quá trình RFQ.