Chi tiết sản phẩm
The crimp style Reverse Polarity TNC jack is built for use with 600-series Cable. The ARTJ-1606 was designed to work in a wide range of applications such as WLAN, Radio Pigtails and Low Loss Coax applications. This connector is compatible with WBC-600 and LMR®600 cable types. The environmental factors of this connector all follow MIL-Std. 202. The temperature range for this product is -55C to +85C. Order online today!
Mã linh kiện (MPN)
Trở kháng
50 Ohm
Tần số
DC
Giao diện
TNC
cụm cáp RF tùy chỉnh từ bản vẽ cho sourcing sản xuất
cụm cáp RF tùy chỉnh từ bản vẽ định hướng sản xuất với review tương thích, hướng dẫn MOQ và hỗ trợ sourcing giảm chi phí.
Chuẩn bị gì trước khi gửi RFQ Dữ liệu đầu vào rõ ràng giảm phỏng đoán và tăng tốc phản hồi hữu ích. ⌄
- • Chia sẻ MPN tham chiếu, linh kiện ghép nối hoặc thương hiệu gốc nếu liên quan đến việc rà soát.
- • Thêm BOM, phân bổ số lượng và nhu cầu hằng năm nếu dự án vượt giai đoạn mẫu thử.
- • Đính kèm bản vẽ, bảng dữ liệu hoặc yêu cầu quan trọng về trở kháng, tần số, lắp đặt và mạ.
Hình ảnh
Bấm để phóng to.
Specifications
| Giao diện | 600-Series |
|---|---|
| Giao diện | WBC600 |
| Giao diện | Coaxial Connectors |
| Giao diện | TNC |
| Trở kháng | 50 Ohm |
| Tần số (tối đa) | DC |
| Tần số (tối đa) | 11 GHz |
| Giới tính đầu nối | Jack |
| Body Style | Straight |
| Polarity | Reverse Polarity |
| Kiểu lắp | None |
| Category | Coaxial Connectors |
Show 2 more specs
| Application | Low Loss Coax Applications; Radio Pigtails; RF Applications; Wi-Fi Applications; WLAN |
|---|---|
| Product Features | Can be used with WBC600‚ LMR®600 cable types; Must be Purchased in Increments of 10 |
Mô tả
Dữ liệu tham chiếu hiện có cho ARTJ-1606: TNC · 50 Ohm · DC. Trở kháng được ghi là 50 Ohm. Nếu đây là thông số quan trọng, hãy xác nhận lại trong RFQ. Tần số được ghi là DC. Giới hạn vận hành thực tế vẫn phụ thuộc vào cụm lắp ráp, đầu ghép nối và bối cảnh ứng dụng. Nếu thiếu thông tin lắp đặt tại đây, hãy xác nhận theo bản vẽ hoặc yêu cầu ghép nối. Trang này dùng để lọc sơ bộ trước RFQ, không phải căn cứ phê duyệt cuối cùng.
Dùng trang này để lọc ứng viên trước RFQ. Chuỗi cung ứng và lộ trình sản xuất tùy chỉnh MOQ 200+ được xác nhận sau khi rà soát bản vẽ/thông số/BOM.
Đầu nối tương tự
Bạn cũng có thể quan tâm đến các model này:
031-6140
Đầu nối RF / Đầu nối đồng trục TNC(M) CR BELDEN 8 / U, 213U
N39T85-L195-
N phích cắm Góc vuông đến TNC jack bulkhead using JBY195
095-850-276-036
TNC Straight Plug to TNC Straight Plug LMR-195 36 inches
LCCA30643-FT5
L-com N male to TNC male right angle cable assembly using LC085TBJ coax, 5 FT is available for same day shipping from our facility. This high quality N cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30643-FT5 N cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF coaxial cable assemblies are built with N connection on one end and right angle TNC connection on the other. This N to right angle TNC cable from L-com has a male to male gender combination. Our N male to TNC male coaxial assembly part number LCCA30643-FT5 can also be known as N plug to right angle TNC plug cable assembly when using alternate gender names. N plug to TNC plug cable assembly LCCA30643-FT5 is manufactured with a formable coax. These formable N to TNC cable assemblies use LC085TBJ coax and are single shielded. L-com single shielded N male to TNC male right angle cable assembly using LC085TBJ coax, 5 FT is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these N to TNC M/M cables is 6 GHz. Technical performance specifications on these 6 GHz N male to TNC right angle male cables are located on the LCCA30643-FT5 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a right angle TNC male to N male cable assembly because it can be used in the opposite direction.N male to TNC male right angle cable assembly using LC085TBJ coax, 5 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our N to right angle TNC cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our N male to TNC male right angle cable assembly using LC085TBJ coax, 5 FT.
PE6TR1192
2 Watt RF Termination (Load), DC to 12 GHz 75 Ohm TNC Male, Brass
LCCA30308-FT1.5
L-com's LCCA30308-FT1.5 is a low loss N female bulkhead to TNC male cable assembly using LMR-400 coax, 1.5 FT with Times Microwave components and ships same-day. The LMR-400 coax of this N cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to TNC cable assembly has a female to male gender configuration with flexible LMR-400 series coax and operates to 6 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. L-com's RF cable assembly with N bulkhead interface enables system designers to have external connections on their product enclosures or to be used for other rack mount and panel mount applications. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N female to N male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30308-FT1.5 L-com Low Loss N Female Bulkhead to TNC Male Cable Assembly using LMR-400 Coax, 1.5 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
Tìm MPN Hỗ trợ khớp chính xác, tiền tố và một phần. ⌄
Tuyên bố miễn trừ
Tên nhà sản xuất, thương hiệu, biểu tượng và số linh kiện chỉ được sử dụng để nhận dạng và đối chiếu. Cstone Technology là đối tác cung ứng xuất khẩu tại Trung Quốc cho các giải pháp thay thế tương thích và không liên kết với các thương hiệu gốc. Thương hiệu vẫn thuộc về chủ sở hữu tương ứng. Sự phù hợp cuối cùng được xác nhận qua kiểm tra bản vẽ/thông số kỹ thuật trong quá trình RFQ.