Chi tiết sản phẩm
RF đầu nối đồng trục đầu nối SMA phích cắm thẳng bấm Đảo cực
Mã linh kiện (MPN)
cụm cáp RF tùy chỉnh từ bản vẽ cho sourcing sản xuất
cụm cáp RF tùy chỉnh từ bản vẽ định hướng sản xuất với review tương thích, hướng dẫn MOQ và hỗ trợ sourcing giảm chi phí.
Chuẩn bị gì trước khi gửi RFQ Dữ liệu đầu vào rõ ràng giảm phỏng đoán và tăng tốc phản hồi hữu ích. ⌄
- • Chia sẻ MPN tham chiếu, linh kiện ghép nối hoặc thương hiệu gốc nếu liên quan đến việc rà soát.
- • Thêm BOM, phân bổ số lượng và nhu cầu hằng năm nếu dự án vượt giai đoạn mẫu thử.
- • Đính kèm bản vẽ, bảng dữ liệu hoặc yêu cầu quan trọng về trở kháng, tần số, lắp đặt và mạ.
Hình ảnh
Bấm để phóng to.
Specifications
| Sản phẩm | Đầu nối |
|---|---|
| Dòng RF | RP-SMA |
| Giới tính | phích cắm (ổ cắm) |
| Trở kháng | 50 Ohm |
| Tần số tối đa | 4 GHz |
| Kiểu kết cuối | Bấm |
| Hướng | Thẳng |
| Cực tính | Đảo |
| Kiểu lắp | _ |
| Loại cáp | RG-174, 188, 316 |
| Cấp bảo vệ IP | _ |
| Đóng gói | _ |
Mô tả
MPN tham chiếu có sẵn cho 72950; xác nhận cuối cùng phụ thuộc vào bản vẽ, thông số kỹ thuật hoặc BOM. Nếu thiếu thông tin lắp đặt tại đây, hãy xác nhận theo bản vẽ hoặc yêu cầu ghép nối. Danh mục cũng ghi mức kín hoặc bảo vệ _. Hãy đối chiếu với yêu cầu môi trường thực tế trong RFQ. Trang này dùng để lọc sơ bộ trước RFQ, không phải căn cứ phê duyệt cuối cùng.
Dùng trang này để lọc ứng viên trước RFQ. Chuỗi cung ứng và lộ trình sản xuất tùy chỉnh MOQ 200+ được xác nhận sau khi rà soát bản vẽ/thông số/BOM.
Đầu nối tương tự
Bạn cũng có thể quan tâm đến các model này:
MinibendLR-15HT
RF Cụm cáp cụm: minibend_R HT (ruggedised) cao Temp low loss cáp với đực SMA phích cắm đầu nối on both ends.
LCCA30226-FT2
L-com's LCCA30226-FT2 is a low loss SMA male to N male right angle cable assembly using LMR-195 coax, 2 FT with Times Microwave components and ships same-day. The LMR-195 coax of this SMA cable uses the PE (F) dielectric with a VoP of 80%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com SMA to N cable assembly has a male to male gender configuration with flexible LMR-195 series coax and operates to 5.8 GHz. The double shield of this SMA cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. This right angle N cable interface on the LMR-195 coax allows for easier connections in tight spaces. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this SMA male to SMA male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30226-FT2 L-com Low Loss SMA Male to N Male Right Angle Cable Assembly using LMR-195 Coax, 2 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
SA3S5W-01
1 dB Fixed Attenuator SMA Male (Plug) to SMA Female (Jack) Up to 3 GHz Rated to 5 Watts, Brass Body, 1.25 VSWR
LCCA30711-3IN
L-com test probe SMA female 4 hole flange to trimmed lead cable assembly using LC047TB coax is available for same day shipping from our facility. This high quality SMA cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30711 SMA cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF test probe coaxial cable assemblies are built with SMA 4 hole flange connection on one end and Trimmed Lead connection on the other. This test probe SMA to Trimmed Lead cable from L-com has a female to sexless gender combination. Our SMA female to Trimmed Lead sexless coaxial assembly part number LCCA30711 can also be known as test probe SMA jack to Trimmed Lead sexless cable assembly when using alternate gender names. SMA jack to Trimmed Lead sexless cable assembly LCCA30711 is manufactured with a formable coax. These formable SMA to Trimmed Lead cable assemblies use LC047TB coax and are single shielded. L-com single shielded test probe SMA female 4 hole flange to trimmed lead cable assembly using LC047TB coax is built from quality components by skilled assemblers with many years of experience. Technical performance specifications on these SMA female4 hole flange to Trimmed Lead sexless cables are located on the LCCA30711 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a test probe Trimmed Lead sexless to SMA female 4 hole flange cable assembly because it can be used in the opposite direction.Test probe SMA female 4 hole flange to trimmed lead cable assembly using LC047TB coax is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our SMA to Trimmed Lead cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our test probe SMA female 4 hole flange to trimmed lead cable assembly using LC047TB coax.
LCCA30718-6IN
L-com test probe SMA female 2 hole flange to straight cut lead cable assembly using LC085TB coax is available for same day shipping from our facility. This high quality SMA cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30718 SMA cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF test probe coaxial cable assemblies are built with SMA 2 hole flange connection on one end and Straight Cut Lead connection on the other. This test probe SMA to Straight Cut Lead cable from L-com has a female to sexless gender combination. Our SMA female to Straight Cut Lead sexless coaxial assembly part number LCCA30718 can also be known as test probe SMA jack to Straight Cut Lead sexless cable assembly when using alternate gender names. SMA jack to Straight Cut Lead sexless cable assembly LCCA30718 is manufactured with a formable coax. These formable SMA to Straight Cut Lead cable assemblies use LC085TB coax and are single shielded. L-com single shielded test probe SMA female 2 hole flange to straight cut lead cable assembly using LC085TB coax is built from quality components by skilled assemblers with many years of experience. Technical performance specifications on these SMA female2 hole flange to Straight Cut Lead sexless cables are located on the LCCA30718 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a test probe Straight Cut Lead sexless to SMA female 2 hole flange cable assembly because it can be used in the opposite direction.Test probe SMA female 2 hole flange to straight cut lead cable assembly using LC085TB coax is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our SMA to Straight Cut Lead cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our test probe SMA female 2 hole flange to straight cut lead cable assembly using LC085TB coax.
2031-5124-02
Đầu nối RF / Đầu nối đồng trục SMA thẳng cáp phích cắm
Tìm MPN Hỗ trợ khớp chính xác, tiền tố và một phần. ⌄
Tuyên bố miễn trừ
Cstone là nhà máy chuyên nghiệp, không phải công ty thương mại, sản xuất đầu nối RF và đồng trục, adapter và cụm cáp gồm N-type, BNC, SMA, SMP, SSMB và MMCX. Chúng tôi sản xuất đầu nối theo bản vẽ 2D hoặc mẫu; độ phù hợp, MOQ, thời gian giao hàng và chi tiết sản xuất được xác nhận qua RFQ. Cstone Technology không liên kết với các thương hiệu gốc. Tên nhà sản xuất, thương hiệu, biểu tượng và số linh kiện chỉ được sử dụng để nhận dạng và đối chiếu. Thương hiệu vẫn thuộc về chủ sở hữu tương ứng. Sự phù hợp cuối cùng được xác nhận qua kiểm tra bản vẽ/thông số kỹ thuật trong quá trình RFQ.