Деталі виробу
4.1/9.5 Mini DIN Female to N Female Adapter, IP67 UnMated
Номер деталі (MPN)
Імпеданс
50 Ohm
Частота
DC
Інтерфейс
4.1/9.5 Mini DIN
custom RF cable assembly за кресленням для production sourcing
custom RF cable assembly за кресленням для production-oriented sourcing з перевіркою сумісності, MOQ guidance і cost-down підтримкою.
Що підготувати до RFQ Чіткі вхідні дані зменшують здогадки та прискорюють корисну відповідь. ⌄
- • Поділіться референсним MPN, відповідною деталлю або вихідним брендом, якщо це важливо для перевірки.
- • Додайте BOM, розбивку кількості та річний попит, якщо проєкт виходить за межі прототипу.
- • Прикладіть креслення, даташит або критичні вимоги щодо імпедансу, частоти, монтажу та покриття.
Зображення
Натисніть, щоб збільшити.
Specifications
| Інтерфейс | Adapters |
|---|---|
| Інтерфейс | 4.1/9.5 Mini DIN |
| Інтерфейс | N |
| Імпеданс | 50 Ohm |
| Імпеданс | 50 Ohm |
| Частота (макс) | DC |
| Частота (макс) | 6 GHz |
| Тип конектора | Female |
| Тип конектора | Female |
| Adapter Body Style | Straight |
| Connector Body Material 1 | Brass |
| Connector Body Material 2 | Brass |
Show 7 more specs
| Connector Body Plating 1 | Tri-Metal |
|---|---|
| Connector Body Plating 2 | Tri-Metal |
| Connector Polarity 1 | Standard |
| Connector Polarity 2 | Standard |
| Монтаж | None |
| Монтаж | None |
| Category | Adapters |
Опис
Поточні довідкові дані для PE91255: 4.1/9.5 Mini DIN · 50 Ohm · DC. Імпеданс указано як 50 Ohm. Якщо цей параметр критичний, підтвердьте його ще раз у RFQ. Частоту вказано як DC. Реальна межа роботи залежить від збірки, відповідної деталі та умов застосування. Якщо монтаж тут не вказано, підтвердьте його з креслення або вимог до з’єднання. Матеріал указано як Brass. Це допомагає перевірці, але не замінює підтвердження повної конструкції проєкту. Використовуйте цю сторінку для попереднього відбору перед RFQ, а не як остаточне схвалення.
Використовуйте цю сторінку для попереднього відбору перед RFQ. Шлях постачання і маршрут кастомного виробництва MOQ 200+ підтверджуються після перевірки креслення/специфікації/BOM.
Подібні з’єднувачі
Вас також можуть зацікавити ці моделі:
12-2002
RF роз'єм Accessories 2 GHz CATV/SATV DUAL GROUNDING BLOCK
LCCA30220-FT10
L-com's LCCA30220-FT10 is a low loss N male to N male right angle cable assembly using LMR-600-DB coax, 10 FT with Times Microwave components and ships same-day. The LMR-600-DB coax of this N cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to N cable assembly has a male to male gender configuration with flexible LMR-600-DB series coax and operates to 5.8 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. This right angle N cable interface on the LMR-600-DB coax allows for easier connections in tight spaces. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30220-FT10 L-com Low Loss N Male to N Male Right Angle Cable Assembly using LMR-600-DB Coax, 10 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
LCCA30194-FT5
L-com's LCCA30194-FT5 is a low loss N male to N female bulkhead cable assembly using LMR-400 coax, 5 FT with Times Microwave components and ships same-day. The LMR-400 coax of this N cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to N cable assembly has a male to female gender configuration with flexible LMR-400 series coax and operates to 5.8 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. L-com's RF cable assembly with N bulkhead interface enables system designers to have external connections on their product enclosures or to be used for other rack mount and panel mount applications. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N female cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30194-FT5 L-com Low Loss N Male to N Female Bulkhead Cable Assembly using LMR-400 Coax, 5 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
LCCA30341-FT5
L-com's LCCA30341-FT5 is a low loss 4.3-10 male to N female bulkhead cable assembly using LMR-600 coax, 5 FT with Times Microwave components and ships same-day. The LMR-600 coax of this 4.3-10 cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 4.3-10 to N cable assembly has a male to female gender configuration with flexible LMR-600 series coax and operates to 5.8 GHz. The double shield of this 4.3-10 cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. L-com's RF cable assembly with N bulkhead interface enables system designers to have external connections on their product enclosures or to be used for other rack mount and panel mount applications. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 4.3-10 male to 4.3-10 female cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30341-FT5 L-com Low Loss 4.3-10 Male to N Female Bulkhead Cable Assembly using LMR-600 Coax, 5 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
C091 31H105 100 2
Circular DIN роз'єми чоловічий 5 контакт кабель прямий
PE37956
7/16 DIN Male Right Angle to 7/16 DIN Male Low Loss Cable Using PE-C195 Coax
Пошук MPN Підтримуються точний, префіксний і частковий збіг. ⌄
Застереження
Назви виробників, торговельні марки, символи та номери деталей використовуються виключно для ідентифікації та перехресного посилання. Cstone Technology — це китайський партнер з експортного постачання сумісних альтернатив і не пов’язана з оригінальними брендами. Торговельні марки залишаються власністю відповідних власників. Остаточна придатність підтверджується перевіркою креслення/специфікації під час RFQ.