CSTONE
Список RFQ

Деталі виробу

TNC Male to TNC Male Cable Using LMR-400-UF Coax

Сумісна альтернатива з Китаю — підтверджуємо відповідність за кресленням/специфікацією.

Номер деталі (MPN)

PE3W00808

Імпеданс

50 Ohm

Інтерфейс

TNC

custom RF cable assembly за кресленням для production sourcing

custom RF cable assembly за кресленням для production-oriented sourcing з перевіркою сумісності, MOQ guidance і cost-down підтримкою.

RF-кабель за кресленням →
WhatsApp — Швидка відповідь
Термін: 3–6 тиж. | MOQ: 200+ шт.
Що підготувати до RFQ Чіткі вхідні дані зменшують здогадки та прискорюють корисну відповідь.
  • Поділіться референсним MPN, відповідною деталлю або вихідним брендом, якщо це важливо для перевірки.
  • Додайте BOM, розбивку кількості та річний попит, якщо проєкт виходить за межі прототипу.
  • Прикладіть креслення, даташит або критичні вимоги щодо імпедансу, частоти, монтажу та покриття.

Зображення

Натисніть, щоб збільшити.

Зображення продукту

PE3W00808 product photo

PE3W00808 product photo

Specifications

Specifications for PE3W00808
ІнтерфейсCable Assemblies
ІнтерфейсLMR-400-UF
ІнтерфейсTNC
ІнтерфейсTNC
Імпеданс50 Ohm
Імпеданс50 Ohm
Імпеданс50 Ohm
Тип конектораMale
Тип конектораMale
ОрієнтаціяStraight
ОрієнтаціяStraight
Connector Polarity 1Standard
Show 5 more specs
МонтажNone
Connector Polarity 2Standard
МонтажNone
Тип кабелюLMR-400-UF
CategoryCable Assemblies

Опис

Поточні довідкові дані для PE3W00808: TNC · 50 Ohm · Straight. У каталозі конфігурацію вказано як: Straight. Імпеданс указано як 50 Ohm. Якщо цей параметр критичний, підтвердьте його ще раз у RFQ. Якщо монтаж тут не вказано, підтвердьте його з креслення або вимог до з’єднання. Використовуйте цю сторінку для попереднього відбору перед RFQ, а не як остаточне схвалення.

Використовуйте цю сторінку для попереднього відбору перед RFQ. Шлях постачання і маршрут кастомного виробництва MOQ 200+ підтверджуються після перевірки креслення/специфікації/BOM.

Подібні з’єднувачі

Вас також можуть зацікавити ці моделі:

PE35785

N Male to TNC Male Cable Using PE-C195 Coax

Переглянути деталі →

LCCA30645-FT2

L-com N male to TNC female bulkhead cable assembly using LC085TBJ coax, 2 FT is available for same day shipping from our facility. This high quality N cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30645-FT2 N cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF coaxial cable assemblies are built with N connection on one end and TNC bulkhead connection on the other. This N to TNC cable from L-com has a male to female gender combination. Our N male to TNC female coaxial assembly part number LCCA30645-FT2 can also be known as N plug to TNC jack cable assembly when using alternate gender names. N plug to TNC jack cable assembly LCCA30645-FT2 is manufactured with a formable coax. These formable N to TNC cable assemblies use LC085TBJ coax and are single shielded. L-com single shielded N male to TNC female bulkhead cable assembly using LC085TBJ coax, 2 FT is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these N to TNC M/F cables is 6 GHz. Technical performance specifications on these 6 GHz N male to TNC female bulkhead cables are located on the LCCA30645-FT2 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a TNC female bulkhead to N male cable assembly because it can be used in the opposite direction.N male to TNC female bulkhead cable assembly using LC085TBJ coax, 2 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our N to TNC cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our N male to TNC female bulkhead cable assembly using LC085TBJ coax, 2 FT.

Переглянути деталі →

PE3W02152-HS

TNC Female to TNC Male Right Angle Low Loss Cable Using LMR-240-UF Coax with HeatShrink

Переглянути деталі →

122400RP

RP-TNC прямий паяння гніздо 0.085-inch Conformable 0.086-inch Conformable RG-405 Bulkhead Rear монтаж 50 Ω

Переглянути деталі →

LCCA30650-FT4

L-com N female to TNC male cable assembly using LC085TBJ coax, 4 FT is available for same day shipping from our facility. This high quality N cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30650-FT4 N cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF coaxial cable assemblies are built with N connection on one end and TNC connection on the other. This N to TNC cable from L-com has a female to male gender combination. Our N female to TNC male coaxial assembly part number LCCA30650-FT4 can also be known as N jack to TNC plug cable assembly when using alternate gender names. N jack to TNC plug cable assembly LCCA30650-FT4 is manufactured with a formable coax. These formable N to TNC cable assemblies use LC085TBJ coax and are single shielded. L-com single shielded N female to TNC male cable assembly using LC085TBJ coax, 4 FT is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these N to TNC F/M cables is 6 GHz. Technical performance specifications on these 6 GHz N female to TNC male cables are located on the LCCA30650-FT4 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a TNC male to N female cable assembly because it can be used in the opposite direction.N female to TNC male cable assembly using LC085TBJ coax, 4 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our N to TNC cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our N female to TNC male cable assembly using LC085TBJ coax, 4 FT.

Переглянути деталі →

G3C01C01012.0

RF кабельна збірка 18 GHz 12"Lng EndA TNC EndB TNC

Переглянути деталі →
Пошук MPN Підтримуються точний, префіксний і частковий збіг.

Підтримуються точний, префіксний і частковий збіг.

Застереження

Назви виробників, торговельні марки, символи та номери деталей використовуються виключно для ідентифікації та перехресного посилання. Cstone Technology — це китайський партнер з експортного постачання сумісних альтернатив і не пов’язана з оригінальними брендами. Торговельні марки залишаються власністю відповідних власників. Остаточна придатність підтверджується перевіркою креслення/специфікації під час RFQ.