Деталі виробу
MIL-DTL-17 N Male to SMA Male Cable Using M17/60-RG142 Coax
Номер деталі (MPN)
Імпеданс
50 Ohm
Інтерфейс
N
custom RF cable assembly за кресленням для production sourcing
custom RF cable assembly за кресленням для production-oriented sourcing з перевіркою сумісності, MOQ guidance і cost-down підтримкою.
Що підготувати до RFQ Чіткі вхідні дані зменшують здогадки та прискорюють корисну відповідь. ⌄
- • Поділіться референсним MPN, відповідною деталлю або вихідним брендом, якщо це важливо для перевірки.
- • Додайте BOM, розбивку кількості та річний попит, якщо проєкт виходить за межі прототипу.
- • Прикладіть креслення, даташит або критичні вимоги щодо імпедансу, частоти, монтажу та покриття.
Зображення
Натисніть, щоб збільшити.
Specifications
| Інтерфейс | Cable Assemblies |
|---|---|
| Інтерфейс | M17/60-RG142 |
| Інтерфейс | N |
| Інтерфейс | SMA |
| Імпеданс | 50 Ohm |
| Імпеданс | 50 Ohm |
| Імпеданс | 50 Ohm |
| Тип конектора | Male |
| Тип конектора | Male |
| Орієнтація | Straight |
| Орієнтація | Straight |
| Монтаж | None |
Show 3 more specs
| Монтаж | None |
|---|---|
| Тип кабелю | M17/60-RG142-27478 |
| Category | Cable Assemblies |
Опис
Поточні довідкові дані для PE3M0014: N · 50 Ohm · Straight. У каталозі конфігурацію вказано як: Straight. Імпеданс указано як 50 Ohm. Якщо цей параметр критичний, підтвердьте його ще раз у RFQ. Якщо монтаж тут не вказано, підтвердьте його з креслення або вимог до з’єднання. Використовуйте цю сторінку для попереднього відбору перед RFQ, а не як остаточне схвалення.
Використовуйте цю сторінку для попереднього відбору перед RFQ. Шлях постачання і маршрут кастомного виробництва MOQ 200+ підтверджуються після перевірки креслення/специфікації/BOM.
Подібні з’єднувачі
Вас також можуть зацікавити ці моделі:
PE4027
SMA Male Connector Clamp/Solder Attachment for RG55, RG58, RG141, RG142, RG223, RG303, RG400, PE-C195, PE-P195, LMR-195
LCCA30467-FT3
L-com BNC female bulkhead to SMA male cable assembly using LC141TBJ coax, 3 FT is available for same day shipping from our facility. This high quality BNC cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30467-FT3 BNC cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF coaxial cable assemblies are built with BNC bulkhead connection on one end and SMA connection on the other. This BNC to SMA cable from L-com has a female to male gender combination. Our BNC female to SMA male coaxial assembly part number LCCA30467-FT3 can also be known as BNC jack to SMA plug cable assembly when using alternate gender names. BNC jack to SMA plug cable assembly LCCA30467-FT3 is manufactured with a formable coax.Maximum frequency for these BNC to SMA F/M cables is 1 GHz. Technical performance specifications on these 1 GHz BNC femalebulkhead to SMA male cables are located on the LCCA30467-FT3 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a SMA male to BNC female bulkhead cable assembly because it can be used in the opposite direction.BNC female bulkhead to SMA male cable assembly using LC141TBJ coax, 3 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our BNC to SMA cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our BNC female bulkhead to SMA male cable assembly using LC141TBJ coax, 3 FT.
LCCN45964
SMA male coax connector attachment LCCN45964 from L-com is in stock at our warehouse and ready to ship on the same business day as your order. Our non-magnetic RF connector has an interface type of RG174U and a 50 Ohms impedance. This male SMA coax connector operates at a maximum frequency of 6 GHz. The SMA male RF interconnect is made of non-magnetic materials that allow RF power to be carried in a magnetic field without creating distortion. L-com’s SMA male straight connector uses crimp/solder as an attachment method.This non-magnetic coax connector attachment supports high signal-to-noise ratio and has a low level of magnetic susceptibility along with no field distortion. The SMA male coax connector from L-com has a PTFE dielectric type and a VSWR of 1.21:1. The target audience for the SMA coax connector is quantum computing, military and aerospace applications as well as medical applications including MRI and patient monitoring devices. Our SMA coax connector has a Beryllium Copper body with Gold plating.The LCCN45964 SMA connector from L-com uses Beryllium Copper contact with gold contact plating. Our high-quality RF connector features a 3 μin minimum Gold body plating specification. This straight SMA connector attachment has a gold contact plating. Our SMA male connector has a maximum operating voltage of 335 Vrms. This threaded RF connector can operate at temperatures ranging from -65 to 165 degrees C.The LCCN45964 from L-com uses a dedicated manufacturing process, specific nickel non-magnetic plating, and raw material selection to guarantee a low magnetic susceptibility level. Make your online purchase right now to take advantage of our same business day shipping. We have no MOQ (minimum order quantity) and the connector ships the very same day from our warehouse.
A39T30-141S-
SMA штекер кутовий до TNC штекер using .141 conformable
SF1102-6024
RF-адаптери між серіями SMA F до PTNC F Flng Mnt адаптер, 4 Hole
ATS-1M1F-09DB2W
Attenuators - Interconnects SMA гніздо до SMAPlug Attenuator, 9 dB,2W
Пошук MPN Підтримуються точний, префіксний і частковий збіг. ⌄
Застереження
Cstone — професійна фабрика, а не торговельна компанія, що виробляє RF- і коаксіальні роз’єми, адаптери та кабельні збірки, зокрема N-type, BNC, SMA, SMP, SSMB і MMCX. Виготовляємо роз’єми за 2D-кресленнями або зразками; сумісність, MOQ, термін постачання та деталі виробництва підтверджуємо через RFQ. Cstone Technology не пов’язана з оригінальними брендами. Назви виробників, торговельні марки, символи та номери деталей використовуються виключно для ідентифікації та перехресного посилання. Торговельні марки залишаються власністю відповідних власників. Остаточна придатність підтверджується перевіркою креслення/специфікації під час RFQ.