Деталі виробу
7/16 DIN Male to 7/16 DIN Female Bulkhead Low PIM Cable Using 1/4 inch Superflexible Coax
Номер деталі (MPN)
Імпеданс
50 Ohm
Інтерфейс
7/16 DIN
custom RF cable assembly за кресленням для production sourcing
custom RF cable assembly за кресленням для production-oriented sourcing з перевіркою сумісності, MOQ guidance і cost-down підтримкою.
Що підготувати до RFQ Чіткі вхідні дані зменшують здогадки та прискорюють корисну відповідь. ⌄
- • Поділіться референсним MPN, відповідною деталлю або вихідним брендом, якщо це важливо для перевірки.
- • Додайте BOM, розбивку кількості та річний попит, якщо проєкт виходить за межі прототипу.
- • Прикладіть креслення, даташит або критичні вимоги щодо імпедансу, частоти, монтажу та покриття.
Зображення
Натисніть, щоб збільшити.
Specifications
| Інтерфейс | Cable Assemblies |
|---|---|
| Інтерфейс | 1/4" Superflexible |
| Інтерфейс | 7/16 DIN |
| Інтерфейс | 7/16 DIN |
| Імпеданс | 50 Ohm |
| Імпеданс | 50 Ohm |
| Імпеданс | 50 Ohm |
| Тип конектора | Male |
| Тип конектора | Female |
| Орієнтація | Straight |
| Орієнтація | Straight |
| Connector Polarity 1 | Standard |
Show 5 more specs
| Монтаж | None |
|---|---|
| Connector Polarity 2 | Standard |
| Монтаж | Bulkhead |
| Тип кабелю | PE-1/4SFHC |
| Category | Cable Assemblies |
Опис
Поточні довідкові дані для PE3C7838: 7/16 DIN · 50 Ohm · Bulkhead. У каталозі конфігурацію вказано як: Straight. Імпеданс указано як 50 Ohm. Якщо цей параметр критичний, підтвердьте його ще раз у RFQ. Монтаж указано як Bulkhead. Якщо важливі обмеження панелі, прохідного монтажу чи фланця, надішліть розміри з RFQ. Використовуйте цю сторінку для попереднього відбору перед RFQ, а не як остаточне схвалення.
Використовуйте цю сторінку для попереднього відбору перед RFQ. Шлях постачання і маршрут кастомного виробництва MOQ 200+ підтверджуються після перевірки креслення/специфікації/BOM.
Подібні з’єднувачі
Вас також можуть зацікавити ці моделі:
LCCA30352-FT3
L-com's LCCA30352-FT3 is a low loss 4.3-10 male to N female cable assembly using LMR-600-DB coax, 3 FT with Times Microwave components and ships same-day. The LMR-600-DB coax of this 4.3-10 cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 4.3-10 to N cable assembly has a male to female gender configuration with flexible LMR-600-DB series coax and operates to 5.8 GHz. The double shield of this 4.3-10 cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 4.3-10 male to 4.3-10 female cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30352-FT3 L-com Low Loss 4.3-10 Male to N Female Cable Assembly using LMR-600-DB Coax, 3 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
PE3C6183
Plenum 7/16 DIN Male Right Angle to 7/16 DIN Female Low PIM Cable Using SPP-250-LLPL Coax Using Times Microwave Parts
22644417
HUBER+SUHNER N connectors perform to a maximum frequency of up to 18 GHz, depending on the connector and cable type.
PE3C7823
4.1/9.5 Mini DIN Male Right Angle to 4.1/9.5 Mini DIN Male Right Angle Low PIM Cable Using 1/4 inch Superflexible Coax
CA-6DMDF025
High quality fully tested 7/16 DIN Male to 7/16 DIN Female cable assemblies featuring high performance 600-Series coax cable. These coax cables have excellent low loss characteristics. Not exactly what you are looking for? Build your own cable assembly with our Custom Product Configurator.
LCCA30174-FT2
L-com's LCCA30174-FT2 is a low loss N male to N female bulkhead cable assembly using LMR-240 coax, 2 FT with Times Microwave components and ships same-day. The LMR-240 coax of this N cable uses the PE (F) dielectric with a VoP of 84%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to N cable assembly has a male to female gender configuration with flexible LMR-240 series coax and operates to 5.8 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. L-com's RF cable assembly with N bulkhead interface enables system designers to have external connections on their product enclosures or to be used for other rack mount and panel mount applications. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N female cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30174-FT2 L-com Low Loss N Male to N Female Bulkhead Cable Assembly using LMR-240 Coax, 2 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
Пошук MPN Підтримуються точний, префіксний і частковий збіг. ⌄
Застереження
Назви виробників, торговельні марки, символи та номери деталей використовуються виключно для ідентифікації та перехресного посилання. Cstone Technology — це китайський партнер з експортного постачання сумісних альтернатив і не пов’язана з оригінальними брендами. Торговельні марки залишаються власністю відповідних власників. Остаточна придатність підтверджується перевіркою креслення/специфікації під час RFQ.