Ürün detayları
SC2081 — 7 / 16 DIN dişi Open Circuit konnektör Cap ile 4.72 Inch Chain
Parça numarası (MPN)
çizimden özel RF kablo montajı için üretim sourcing
Uyumluluk incelemesi, MOQ rehberi ve cost-down sourcing desteği ile üretime yönelik çizimden özel RF kablo montajı.
RFQ öncesi ne hazırlamalı Net girdiler tahminleri azaltır ve yararlı yanıtı hızlandırır. ⌄
- • İnceleme için önemliyse referans MPN'yi, eşleşen parçayı veya kaynak markayı paylaşın.
- • Proje prototip aşamasını aşıyorsa BOM, adet dağılımı ve yıllık talebi ekleyin.
- • Çizim, veri sayfası veya empedans, frekans, montaj ve kaplama için kritik gereksinimleri ekleyin.
Görsel
Büyütmek için tıklayın.
Specifications
| Operating Temperature | -65 - +165 deg C |
|---|---|
| Category | koaksiyel konnektör |
| IP derecesi | koaksiyel konnektör |
Açıklama
SC2081 için referans MPN var; nihai onay çizim, şartname veya BOM incelemesine bağlıdır. Montaj bilgisi burada yoksa çizimden veya eşleşme gereksiniminden doğrulayın. Bu sayfayı RFQ öncesi kısa liste için kullanın; nihai onay yerine geçmez.
RFQ öncesi kısa liste için bu sayfayı kullanın. MOQ 200+ tedarik yolu ve özel üretim rotası, çizim/şartname/BOM incelemesinden sonra doğrulanır.
Benzer konnektörler
Bu modeller de ilginizi çekebilir:
LCCA30340-FT6
L-com's LCCA30340-FT6 is a low loss 4.3-10 male to N female cable assembly using LMR-600 coax, 6 FT with Times Microwave components and ships same-day. The LMR-600 coax of this 4.3-10 cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 4.3-10 to N cable assembly has a male to female gender configuration with flexible LMR-600 series coax and operates to 5.8 GHz. The double shield of this 4.3-10 cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 4.3-10 male to 4.3-10 female cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30340-FT6 L-com Low Loss 4.3-10 Male to N Female Cable Assembly using LMR-600 Coax, 6 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
CC-NMNMT025
Customers designed the L-com CC-NMNMT025 low loss N Male to N Male high running RF cable assembly with CA-240, which we now offer as a standard. This flexible 50 Ohm low loss cable is intended for use in laboratories, universities, communications, aerospace, and military defense sectors. Our male-to-male cable assembly includes 50 Ohm male-type connectors on both ends with crimp attachments and gold-plated brass contacts. Our RF cable is constructed with a solid copper center conductor and a PE dielectric, making it perfect for installers, manufacturers, and prototypes. This black RF cable assembly features a PE jacket with a diameter of 0.240 inches. The CC-NMNMT025 N Male to N Male low loss cable assembly has a maximum frequency of 5.8 GHz. Our in-series cable assembly's maximum VSWR is 1.5:1. The L-com RF cable assembly is 25 feet long, with a minimum bend radius of 1.2 inch for single bends and 2.5 inches for repeated bends. Our 25-foot CA-240 cable assembly has an 84% velocity of propagation and a minimum RF shielding of 90 dB. L-com has the largest in-stock selection of CA-240 RF cable assemblies for international and domestic orders with same-day shipment. We are a global leader of wired and wireless connectivity products, offering a wide range of solutions across many key industries, including electronics, medical, industrial automation, military, and telecommunication. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect low loss N Male to N Male cable assembly for your requirements.
2.4-LA-PP
The 2.4-LA-PP is an 2.4mm Right Angle adaptor connector. This connector is suitable for various high-frequency applications. It features a impedance 50Ω, operates up to 50GHz, and has a rated voltage of AC 160V, ensures a high insulation resistance (1000MΩ(Min.) at DC 500V), a low contact resistance (Between inner conductors: 4 mΩ(Max.),between outer conductors: 2.5 mΩ(Max.), and an excellent V.S.W.R 1.35(Max.) at DC~50GHz. The contact is made of Beryllium Copper/Gold Plating, while the body is Stainless/Passivate Treatment. We can customize our products for you. We offer total customization, including changes to a product's shape, length, material, surface treatment, and packaging. Available from 1 piece for in-stock items.
LCCA30160-FT1.5
L-com's LCCA30160-FT1.5 is a low loss N male right angle to N male right angle cable assembly using LMR-195-FR coax, 1.5 FT with Times Microwave components and ships same-day. The LMR-195-FR coax of this N cable uses the PE dielectric with a VoP of 76%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to N cable assembly has a male to male gender configuration with flexible LMR-195-FR series coax and operates to 5.8 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. This right angle N cable interface on the LMR-195-FR coax allows for easier connections in tight spaces. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30160-FT1.5 L-com Low Loss N Male Right Angle to N Male Right Angle Cable Assembly using LMR-195-FR Coax, 1.5 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
LMR-LW600-LC-FT
LMR-LW600-LC-FT coax cable from L-com is only one of a large number of radio frequency coaxial cable types specifically stocked to be ready for quick shipment. L-com LMR-LW600-LC-FT coax cable is manufactured in a flexible design and has a 50 Ohm impedance. This low loss flexible 50 Ohm coax cable LMR-LW600-LC-FT is constructed with a 0.590 inch diameter and Black PE jacket. LMR-LW600-LC-FT flexible 50 Ohm coax cable with PVC jacket is rated for a 5.8GHz maximum operating frequency. This 50 Ohm 0.590 inch diameter and low loss flexible coax cable is built with a double shield count and RF shielding of 90 dB. L-com LMR-LW600-LC-FT coax is constructed with Foam PE dielectric and a maximum operating temperature of +85 degrees C. Times Microwave LMR-LW600-LC-FT coax cable specs for this wire properties can be found on its RF coax cable LMR-LW600-LC-FT datasheet. LMR-LW600-LC-FT cable is part of more than one million RF, microwave parts in stock at L-com. This Times Microwave low loss LMR-LW600-LC-FT coax cable is ready to buy and can be shipped worldwide. L-com also maintains a wide selection of other radio frequency coaxial cable types that ship same-day from our warehouse as with the rest of our other RF/microwave components. * LMR™ is a trademark of Times Microwave Systems.
PE34098
7/16 DIN Male to N Male Cable Using RG213 Coax
MPN Arama Tam eşleşme, önek ve kısmi eşleşme desteklenir. ⌄
Sorumluluk reddi
Cstone, N-type, BNC, SMA, SMP, SSMB ve MMCX dâhil RF ve koaksiyel konnektörler, adaptörler ve kablo montajları üreten profesyonel bir fabrikadır; ticaret şirketi değiliz. Konnektörleri 2D çizim veya numuneye göre üretiriz; uygunluk, MOQ, teslim süresi ve üretim ayrıntıları RFQ ile doğrulanır. Cstone Technology orijinal markalarla bağlantılı değildir. Üretici adları, ticari markalar, semboller ve parça numaraları yalnızca tanımlama ve çapraz referans amacıyla kullanılmaktadır. Ticari markalar ilgili sahiplerinin mülkiyetindedir. Nihai uygunluk, RFQ sürecinde çizim/şartname incelemesiyle doğrulanır.