Ürün detayları
4.1/9.5 Mini DIN Male Right Angle Connector Solder Attachment for SPP-250-LLPL, Low PIM
Parça numarası (MPN)
Empedans
50 Ohm
Frekans
DC
Arayüz
4.1/9.5 Mini DIN
çizimden özel RF kablo montajı için üretim sourcing
Uyumluluk incelemesi, MOQ rehberi ve cost-down sourcing desteği ile üretime yönelik çizimden özel RF kablo montajı.
RFQ öncesi ne hazırlamalı Net girdiler tahminleri azaltır ve yararlı yanıtı hızlandırır. ⌄
- • İnceleme için önemliyse referans MPN'yi, eşleşen parçayı veya kaynak markayı paylaşın.
- • Proje prototip aşamasını aşıyorsa BOM, adet dağılımı ve yıllık talebi ekleyin.
- • Çizim, veri sayfası veya empedans, frekans, montaj ve kaplama için kritik gereksinimleri ekleyin.
Görsel
Büyütmek için tıklayın.
Specifications
| Arayüz | SPP-250-LLPL |
|---|---|
| Arayüz | Connectors |
| Arayüz | 4.1/9.5 Mini DIN |
| Empedans | 50 Ohm |
| Frekans (maks) | DC |
| Frekans (maks) | 6 GHz |
| Cinsiyet | Male |
| Body Style | Right Angle |
| Polarity | Standard |
| Attachment Method | Solder/Solder |
| Montaj | None |
| Category | Connectors |
Açıklama
PE45422 için mevcut referans verileri: 4.1/9.5 Mini DIN · 50 Ohm · DC. Empedans 50 Ohm olarak listeleniyor. Kritikse RFQ içinde tekrar doğrulayın. Frekans DC olarak listeleniyor. Gerçek çalışma sınırı montaj, eşleşen parça ve uygulama koşullarına bağlıdır. Montaj bilgisi burada yoksa çizimden veya eşleşme gereksiniminden doğrulayın. Bu sayfayı RFQ öncesi kısa liste için kullanın; nihai onay yerine geçmez.
RFQ öncesi kısa liste için bu sayfayı kullanın. MOQ 200+ tedarik yolu ve özel üretim rotası, çizim/şartname/BOM incelemesinden sonra doğrulanır.
Benzer konnektörler
Bu modeller de ilginizi çekebilir:
12BL6MX
Circular DIN konnektör erkek 6 pin METAL DIN
550T039M4R9B0-05B
D-Sub Arka Muhafazalar BANDING SPLIT BS TOP REAR montaj
LCCA30205-FT1
L-com's LCCA30205-FT1 is a low loss N male to N female bulkhead cable assembly using LMR-400-DB coax, 1 FT with Times Microwave components and ships same-day. The LMR-400-DB coax of this N cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to N cable assembly has a male to female gender configuration with flexible LMR-400-DB series coax and operates to 6 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. L-com's RF cable assembly with N bulkhead interface enables system designers to have external connections on their product enclosures or to be used for other rack mount and panel mount applications. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N female cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30205-FT1 L-com Low Loss N Male to N Female Bulkhead Cable Assembly using LMR-400-DB Coax, 1 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
CA-600-R1K
600 Series cable is a very high performance cable and offers an attractive alternative to armored cables. This series features excellent low loss characteristics and can be purchased by the reel or by the foot depending on your applications. Order online today!
3.5-A-PJ
The 3.5-A-PJ is an 3.5mm adaptor connector. This connector is suitable for various high-frequency applications. It features a impedance 50Ω, operates up to 26.5GHz, and has a rated voltage of AC 335V, ensures a high insulation resistance (5000MΩ(Min.) at DC 500V), a low contact resistance (Between inner conductors: 3 mΩ(Max.),between outer conductors: 2.5 mΩ(Max.), and an excellent V.S.W.R 1.2(Max.) at DC~26.5GHz. The contact is made of Beryllium Copper/Gold Plating, while the body is Stainless/Passivate Treatment. We can customize our products for you. We offer total customization, including changes to a product's shape, length, material, surface treatment, and packaging. Available from 1 piece for in-stock items.
PD-40VS
DIN konnektör DIN, 4P power jack, 20 Vdc, 7.5 A, dikey, Delik İçi, full shield
MPN Arama Tam eşleşme, önek ve kısmi eşleşme desteklenir. ⌄
Sorumluluk reddi
Üretici adları, ticari markalar, semboller ve parça numaraları yalnızca tanımlama ve çapraz referans amacıyla kullanılmaktadır. Cstone Technology, uyumlu alternatifler için Çin merkezli bir ihracat tedarik ortağıdır ve orijinal markalarla bağlantılı değildir. Ticari markalar ilgili sahiplerinin mülkiyetindedir. Nihai uygunluk, RFQ sürecinde çizim/şartname incelemesiyle doğrulanır.