Ürün detayları
7/16 DIN Male Right Angle to N Female Low PIM Cable Using TFT-402 Coax Using Times Microwave Components
Parça numarası (MPN)
Empedans
50 Ohm
Arayüz
7/16 DIN
çizimden özel RF kablo montajı için üretim sourcing
Uyumluluk incelemesi, MOQ rehberi ve cost-down sourcing desteği ile üretime yönelik çizimden özel RF kablo montajı.
RFQ öncesi ne hazırlamalı Net girdiler tahminleri azaltır ve yararlı yanıtı hızlandırır. ⌄
- • İnceleme için önemliyse referans MPN'yi, eşleşen parçayı veya kaynak markayı paylaşın.
- • Proje prototip aşamasını aşıyorsa BOM, adet dağılımı ve yıllık talebi ekleyin.
- • Çizim, veri sayfası veya empedans, frekans, montaj ve kaplama için kritik gereksinimleri ekleyin.
Görsel
Büyütmek için tıklayın.
Specifications
| Arayüz | Cable Assemblies |
|---|---|
| Arayüz | TFT-402 |
| Arayüz | 7/16 DIN |
| Arayüz | N |
| Empedans | 50 Ohm |
| Empedans | 50 Ohm |
| Empedans | 50 Ohm |
| Cinsiyet | Male |
| Cinsiyet | Female |
| Yön | Right Angle |
| Yön | Straight |
| Connector Polarity 1 | Standard |
Show 5 more specs
| Montaj | None |
|---|---|
| Connector Polarity 2 | Standard |
| Montaj | None |
| Kablo tipi | TFT-402 |
| Category | Cable Assemblies |
Açıklama
PE3C8271 için mevcut referans verileri: 7/16 DIN · 50 Ohm · Right Angle. Katalogdaki yapılandırma şu şekilde listeleniyor: Right Angle. Empedans 50 Ohm olarak listeleniyor. Kritikse RFQ içinde tekrar doğrulayın. Montaj bilgisi burada yoksa çizimden veya eşleşme gereksiniminden doğrulayın. Bu sayfayı RFQ öncesi kısa liste için kullanın; nihai onay yerine geçmez.
RFQ öncesi kısa liste için bu sayfayı kullanın. MOQ 200+ tedarik yolu ve özel üretim rotası, çizim/şartname/BOM incelemesinden sonra doğrulanır.
Benzer konnektörler
Bu modeller de ilginizi çekebilir:
SM4683
RA N Female (Jack) to 7/16 DIN Male (Plug) Adapter, 1.25 VSWR
T3652-000
Circular DIN konnektör erkek receptacle 14 WAY
LCCA30349-FT3
L-com's LCCA30349-FT3 is a low loss N female bulkhead to 7/16 DIN male cable assembly using LMR-600-DB coax, 3 FT with Times Microwave components and ships same-day. The LMR-600-DB coax of this N cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to 7/16 DIN cable assembly has a female to male gender configuration with flexible LMR-600-DB series coax and operates to 5.8 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. L-com's RF cable assembly with N bulkhead interface enables system designers to have external connections on their product enclosures or to be used for other rack mount and panel mount applications. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N female to N male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30349-FT3 L-com Low Loss N Female Bulkhead to 7/16 DIN Male Cable Assembly using LMR-600-DB Coax, 3 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
LCCA30210-FT4
L-com's LCCA30210-FT4 is a low loss 7/16 DIN male to 7/16 DIN male cable assembly using LMR-600 coax, 4 FT with Times Microwave components and ships same-day. The LMR-600 coax of this 7/16 DIN cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 7/16 DIN to 7/16 DIN cable assembly has a male to male gender configuration with flexible LMR-600 series coax and operates to 3 GHz. The double shield of this 7/16 DIN cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 7/16 DIN male to 7/16 DIN male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30210-FT4 L-com Low Loss 7/16 DIN Male to 7/16 DIN Male Cable Assembly using LMR-600 Coax, 4 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
LCCA30192-FT5
L-com's LCCA30192-FT5 is a low loss N male right angle to N male cable assembly using LMR-400 coax, 5 FT with Times Microwave components and ships same-day. The LMR-400 coax of this N cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to N cable assembly has a male to male gender configuration with flexible LMR-400 series coax and operates to 6 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. This right angle N cable interface on the LMR-400 coax allows for easier connections in tight spaces. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30192-FT5 L-com Low Loss N Male Right Angle to N Male Cable Assembly using LMR-400 Coax, 5 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
85182941
MINI250™H is for payload integration cabling, helping transmit antenna signals while providing the ability to complete long runs between cable subsystems. It is a significant step-function and low-loss leader in the mold of the MINI141™H cable.
MPN Arama Tam eşleşme, önek ve kısmi eşleşme desteklenir. ⌄
Sorumluluk reddi
Üretici adları, ticari markalar, semboller ve parça numaraları yalnızca tanımlama ve çapraz referans amacıyla kullanılmaktadır. Cstone Technology, uyumlu alternatifler için Çin merkezli bir ihracat tedarik ortağıdır ve orijinal markalarla bağlantılı değildir. Ticari markalar ilgili sahiplerinin mülkiyetindedir. Nihai uygunluk, RFQ sürecinde çizim/şartname incelemesiyle doğrulanır.