Ürün detayları
TRB 2-Slot Straight Plug 78 Ohm
Parça numarası (MPN)
Empedans
78 Ohm
Arayüz
TRB 2-Slot
çizimden özel RF kablo montajı için üretim sourcing
Uyumluluk incelemesi, MOQ rehberi ve cost-down sourcing desteği ile üretime yönelik çizimden özel RF kablo montajı.
RFQ öncesi ne hazırlamalı Net girdiler tahminleri azaltır ve yararlı yanıtı hızlandırır. ⌄
- • İnceleme için önemliyse referans MPN'yi, eşleşen parçayı veya kaynak markayı paylaşın.
- • Proje prototip aşamasını aşıyorsa BOM, adet dağılımı ve yıllık talebi ekleyin.
- • Çizim, veri sayfası veya empedans, frekans, montaj ve kaplama için kritik gereksinimleri ekleyin.
Görsel
Büyütmek için tıklayın.
Specifications
| Arayüz | Coaxial Cable Assemblies |
|---|---|
| Arayüz | TWCH-78-2-LC |
| Arayüz | TRB 2-Slot |
| Arayüz | Blunt Cut |
| Empedans | 78 Ohm |
| Empedans | 78 Ohm |
| Cinsiyet | Plug |
| Cinsiyet | Hermaphroditic |
| Yön | Straight |
| Yön | Straight |
| Connector 1 Body Material | Brass |
| Connector 1 Body Plating | Nickel |
Show 5 more specs
| Connector 1 Polarity | Standard |
|---|---|
| Connector 2 Polarity | Standard |
| Kablo tipi | TWCH-78-2-LC |
| Length, Max | 12 inches |
| Category | Coaxial Cable Assemblies |
Açıklama
LC3MSA00604-12 için mevcut referans verileri: TRB 2-Slot · 78 Ohm · Straight. Katalogdaki yapılandırma şu şekilde listeleniyor: Straight. Empedans 78 Ohm olarak listeleniyor. Kritikse RFQ içinde tekrar doğrulayın. Montaj bilgisi burada yoksa çizimden veya eşleşme gereksiniminden doğrulayın. Malzeme Brass olarak listeleniyor. İnceleme için yararlıdır, ancak tüm proje yapısının doğrulanmasının yerini tutmaz. Bu sayfayı RFQ öncesi kısa liste için kullanın; nihai onay yerine geçmez.
RFQ öncesi kısa liste için bu sayfayı kullanın. MOQ 200+ tedarik yolu ve özel üretim rotası, çizim/şartname/BOM incelemesinden sonra doğrulanır.
Benzer konnektörler
Bu modeller de ilginizi çekebilir:
LC3MP2377-36
The L-com LC3MP2377-36 MIL-STD-1553 flexible RF cable assembly is perfect for applications that need tight bends and flexible cable. This TRB 3-slot to TRB 2-slot cable assembly is plug to plug and made of 78 ohm flexible M17-176-00002-LC twinax. Our 78 Ohm cable assembly is available with a PFA jacket and a copper inner conductor with silver plating. We offer a blue, 0.57-inch OD TRB 3-slot to TRB 2-slot cable that operates at 10 MHz.This blue RF cable assembly is the most commonly utilized cable assembly in wide connectivity applications such as bus couplers, avionics control boxes, and bus relay. L-com's LC3MP2377-36 MIL-STD-1553 flexible RF cable assembly is available with PTFE dielectric. Our TRB 3-slot plug to TRB 2-slot plug cable has bayonet coupling connectors made of brass with nickel plating. This RF flexible M17-176-00002-LC twinax cable operates between -55 and 200 degrees Celsius.L-com has one of the largest in-stock selections of MIL-STD-1553 flexible RF cable assembly with same-day shipment for domestic and international orders. We are a global leader of wired and wireless connectivity products, offering a wide range of solutions across many key industries, including electronics, medical, industrial automation, military, and telecommunication. For further information on similar products, our expert technical support and trained sales team can get you the perfect TRB 3-slot plug to TRB 2-slot plug cable as per your requirements.
LCCA30189-FT3
L-com's LCCA30189-FT3 is a low loss 4.3-10 male to 4.3-10 male cable assembly using LMR-400 coax, 3 FT with Times Microwave components and ships same-day. The LMR-400 coax of this 4.3-10 cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 4.3-10 to 4.3-10 cable assembly has a male to male gender configuration with flexible LMR-400 series coax and operates to 6 GHz. The double shield of this 4.3-10 cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 4.3-10 male to 4.3-10 male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30189-FT3 L-com Low Loss 4.3-10 Male to 4.3-10 Male Cable Assembly using LMR-400 Coax, 3 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
FMC0115393
N Male to 7/16 DIN Male Cable RG-393 Coax
C091-31C008-200-2
Circular DIN konnektör erkek receptacle 8 WAY
LCCA30179-FT2
L-com's LCCA30179-FT2 is a low loss 4.3-10 male to 4.3-10 male cable assembly using LMR-240-DB coax, 2 FT with Times Microwave components and ships same-day. The LMR-240-DB coax of this 4.3-10 cable uses the PE (F) dielectric with a VoP of 84%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 4.3-10 to 4.3-10 cable assembly has a male to male gender configuration with flexible LMR-240-DB series coax and operates to 5.8 GHz. The double shield of this 4.3-10 cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 4.3-10 male to 4.3-10 male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30179-FT2 L-com Low Loss 4.3-10 Male to 4.3-10 Male Cable Assembly using LMR-240-DB Coax, 2 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
NA-PJ-10
The NA-PJ-10 is an N Attenuator. This connector is suitable for various high-frequency applications. It features a impedance 50Ω, operates up to 4 GHz, and an excellent V.S.W.R 1.15(Max.) at DC~2 GHz, 1.2(Max.) at DC~4 GHz. Withstanding temperatures from -20 to +65°C. The contact is made of Brass/Beryllium Copper/Gold Plating, while the body is Brass/Nickel Plating. Rated Power is 2W.Attenuation is 10±0.5dB up to 2GHz, 10±1.0dB up to 4GHz. We can customize our products for you. We offer total customization, including changes to a product's shape, length, material, surface treatment, and packaging. Available from 1 piece for in-stock items.
MPN Arama Tam eşleşme, önek ve kısmi eşleşme desteklenir. ⌄
Sorumluluk reddi
Cstone, N-type, BNC, SMA, SMP, SSMB ve MMCX dâhil RF ve koaksiyel konnektörler, adaptörler ve kablo montajları üreten profesyonel bir fabrikadır; ticaret şirketi değiliz. Konnektörleri 2D çizim veya numuneye göre üretiriz; uygunluk, MOQ, teslim süresi ve üretim ayrıntıları RFQ ile doğrulanır. Cstone Technology orijinal markalarla bağlantılı değildir. Üretici adları, ticari markalar, semboller ve parça numaraları yalnızca tanımlama ve çapraz referans amacıyla kullanılmaktadır. Ticari markalar ilgili sahiplerinin mülkiyetindedir. Nihai uygunluk, RFQ sürecinde çizim/şartname incelemesiyle doğrulanır.