รายละเอียดสินค้า
High Power 100 Watt RF Load Up to 3 GHz With 7/16 DIN Male Input Conduction Cooled Body Black Anodized Aluminum Heatsink
หมายเลขชิ้นส่วน (MPN)
อิมพีแดนซ์
50 Ohm
ความถี่
DC
อินเทอร์เฟซ
7/16 DIN
ชุดสาย RF custom จากแบบ สำหรับ sourcing เพื่อการผลิต
ชุดสาย RF custom จากแบบ สำหรับการผลิต พร้อมตรวจ compatibility แนะนำ MOQ และสนับสนุน cost-down sourcing
ต้องเตรียมอะไรก่อน RFQ ข้อมูลที่ชัดเจนช่วยลดการคาดเดาและเร่งคำตอบที่เป็นประโยชน์ ⌄
- • แจ้ง MPN อ้างอิง ชิ้นส่วนที่เข้าคู่กัน หรือแบรนด์ต้นทาง หากเกี่ยวข้องกับการตรวจสอบ
- • เพิ่ม BOM การแบ่งจำนวน และความต้องการรายปี หากโครงการเกินขั้นต้นแบบ
- • แนบแบบ แผ่นข้อมูล หรือข้อกำหนดสำคัญด้านอิมพีแดนซ์ ความถี่ การติดตั้ง และการชุบ
รูปภาพ
คลิกเพื่อขยาย
Specifications
| อินเทอร์เฟซ | Terminations |
|---|---|
| อินเทอร์เฟซ | RF Load |
| อินเทอร์เฟซ | 7/16 DIN |
| อิมพีแดนซ์ | 50 Ohm |
| ความถี่ (สูงสุด) | DC |
| ความถี่ (สูงสุด) | 3 GHz |
| เพศของคอนเนคเตอร์ | Male |
| Maximum VSWR | 1.2:1 |
| Maximum Power | 100 Watt |
| Category | Terminations |
คำอธิบาย
ข้อมูลอ้างอิงปัจจุบันสำหรับ PE6197: 7/16 DIN · 50 Ohm · DC แคตตาล็อกระบุโครงแบบไว้เป็น: RF Load อิมพีแดนซ์ระบุเป็น 50 Ohm หากค่านี้สำคัญ โปรดยืนยันอีกครั้งใน RFQ ความถี่ระบุเป็น DC ขีดจำกัดใช้งานจริงยังขึ้นกับชุดประกอบ ชิ้นส่วนคู่ต่อ และบริบทการใช้งาน หากไม่มีข้อมูลการติดตั้งที่นี่ ให้ยืนยันจากแบบหรือข้อกำหนดการจับคู่ ใช้หน้านี้เพื่อคัดเลือกก่อน RFQ ไม่ใช่การอนุมัติขั้นสุดท้าย
ใช้หน้านี้เพื่อคัดกรองก่อน RFQ เส้นทางจัดหาและเส้นทางผลิตตามสั่ง MOQ 200+ จะยืนยันหลังตรวจแบบ/สเปก/BOM
คอนเนคเตอร์ที่คล้ายกัน
คุณอาจสนใจรุ่นเหล่านี้ด้วย:
LCCA30191-FT3
L-com's LCCA30191-FT3 is a low loss N male to N male cable assembly using LMR-400 coax, 3 FT with Times Microwave components and ships same-day. The LMR-400 coax of this N cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to N cable assembly has a male to male gender configuration with flexible LMR-400 series coax and operates to 6 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30191-FT3 L-com Low Loss N Male to N Male Cable Assembly using LMR-400 Coax, 3 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
LMR-200-UF
LMR-200-UF coax cable from L-com is only one of a large number of radio frequency coaxial cable types specifically stocked to be ready for quick shipment. L-com Microwave LMR-200-UF coax cable is manufactured in a flexible design and has a 50 Ohm impedance. This low loss flexible 50 Ohm coax cable LMR-200-UF is constructed with a 0.195 inch diameter and Black TPE jacket. LMR-200-UF flexible 50 Ohm coax cable with TPE jacket is rated for a 5.8 GHz maximum operating frequency. This 50 Ohm 0.195 inch diameter and low loss flexible coax cable is built with a double shield count and RF shielding of 90 dB. L-com Microwave LMR-200-UF coax is constructed with PE (F) dielectric and a maximum operating temperature of 85 degrees C. Times Microwave LMR-200-UF coax cable specs for this wire properties can be found on its RF coax cable LMR-200-UF datasheet. LMR-200-UF cable is part of more than one million RF, microwave parts in stock at L-com. This Times Microwave low loss LMR-200-UF coax cable is ready to buy and can be shipped worldwide. L-com also maintains a wide selection of other radio frequency coaxial cable types that ship same-day from our warehouse as with the rest of our other RF/microwave components. * LMR™ is a trademark of Times Microwave Systems.
591-0500
Circular DIN คอนเนคเตอร์ ปลั๊ก BLACK 5 พิน
LC3MSA00604-24
The L-com LC3MSA00604-24 MIL-STD-1553 flexible RF cable assembly is perfect for applications that need tight bends and flexible cable. This TRB 2-slot to blunt cut cable assembly is plug to blunt cut and made of 78 ohm flexible TWCH-78-2-LC twinax. Our 78 Ohm cable assembly is available with a HF POF jacket and a copper inner conductor with silver plating. We offer a blue, 0.57-inch OD TRB 2-slot to blunt cut cable that operates at 500 MHz.This blue RF cable assembly is the most commonly utilized cable assembly in wide connectivity applications such as bus couplers, avionics control boxes, and bus relay. L-com's LC3MSA00604-24 MIL-STD-1553 flexible RF cable assembly is available with PE dielectric. Our TRB 2-slot plug to blunt cut cable has bayonet coupling connectors made of brass with nickel plating. This RF flexible TWCH-78-2-LC twinax cable operates between -30 and 80 degrees Celsius.L-com has one of the largest in-stock selections of MIL-STD-1553 flexible RF cable assembly with same-day shipment for domestic and international orders. We are a global leader of wired and wireless connectivity products, offering a wide range of solutions across many key industries, including electronics, medical, industrial automation, military, and telecommunication. For further information on similar products, our expert technical support and trained sales team can get you the perfect TRB 2-slot plug to blunt cut cable as per your requirements.
C091 31K012 100 2
Circular DIN คอนเนคเตอร์ ตัวผู้ 12 พิน มุมฉาก สายเคเบิล
T3439-502
Circular DIN คอนเนคเตอร์ ตัวผู้ สายเคเบิล คอนเนคเตอร์ 7 WAY
ค้นหา MPN รองรับการค้นหาแบบตรงตัว คำนำหน้า และบางส่วน ⌄
ข้อจำกัดความรับผิดชอบ
ชื่อผู้ผลิต เครื่องหมายการค้า สัญลักษณ์ และหมายเลขชิ้นส่วนใช้เพื่อการระบุตัวตนและอ้างอิงข้ามเท่านั้น Cstone Technology เป็นพันธมิตรจัดหาสินค้าส่งออกจากประเทศจีนสำหรับทางเลือกที่เข้ากันได้ และไม่มีส่วนเกี่ยวข้องกับแบรนด์ดั้งเดิม เครื่องหมายการค้ายังคงเป็นทรัพย์สินของเจ้าของที่เกี่ยวข้อง ความเหมาะสมขั้นสุดท้ายได้รับการยืนยันโดยการตรวจสอบแบบ/สเปกระหว่าง RFQ