รายละเอียดสินค้า
7/16 DIN Male to N Male Cable Using SPO-375 Coax
หมายเลขชิ้นส่วน (MPN)
อิมพีแดนซ์
50 Ohm
อินเทอร์เฟซ
7/16 DIN
ชุดสาย RF custom จากแบบ สำหรับ sourcing เพื่อการผลิต
ชุดสาย RF custom จากแบบ สำหรับการผลิต พร้อมตรวจ compatibility แนะนำ MOQ และสนับสนุน cost-down sourcing
ต้องเตรียมอะไรก่อน RFQ ข้อมูลที่ชัดเจนช่วยลดการคาดเดาและเร่งคำตอบที่เป็นประโยชน์ ⌄
- • แจ้ง MPN อ้างอิง ชิ้นส่วนที่เข้าคู่กัน หรือแบรนด์ต้นทาง หากเกี่ยวข้องกับการตรวจสอบ
- • เพิ่ม BOM การแบ่งจำนวน และความต้องการรายปี หากโครงการเกินขั้นต้นแบบ
- • แนบแบบ แผ่นข้อมูล หรือข้อกำหนดสำคัญด้านอิมพีแดนซ์ ความถี่ การติดตั้ง และการชุบ
รูปภาพ
คลิกเพื่อขยาย
Specifications
| อินเทอร์เฟซ | Cable Assemblies |
|---|---|
| อินเทอร์เฟซ | SPO-375 |
| อินเทอร์เฟซ | 7/16 DIN |
| อินเทอร์เฟซ | N |
| อิมพีแดนซ์ | 50 Ohm |
| อิมพีแดนซ์ | 50 Ohm |
| อิมพีแดนซ์ | 50 Ohm |
| เพศของคอนเนคเตอร์ | Male |
| เพศของคอนเนคเตอร์ | Male |
| ทิศทาง | Straight |
| ทิศทาง | Straight |
| Connector Polarity 1 | Standard |
Show 6 more specs
| การติดตั้ง | None |
|---|---|
| Connector Polarity 2 | Standard |
| การติดตั้ง | None |
| ประเภทสายเคเบิล | SPO-375 |
| Length | 7 inches |
| Category | Cable Assemblies |
คำอธิบาย
ข้อมูลอ้างอิงปัจจุบันสำหรับ PE3W11883: 7/16 DIN · 50 Ohm · Straight แคตตาล็อกระบุโครงแบบไว้เป็น: Straight อิมพีแดนซ์ระบุเป็น 50 Ohm หากค่านี้สำคัญ โปรดยืนยันอีกครั้งใน RFQ หากไม่มีข้อมูลการติดตั้งที่นี่ ให้ยืนยันจากแบบหรือข้อกำหนดการจับคู่ ใช้หน้านี้เพื่อคัดเลือกก่อน RFQ ไม่ใช่การอนุมัติขั้นสุดท้าย
ใช้หน้านี้เพื่อคัดกรองก่อน RFQ เส้นทางจัดหาและเส้นทางผลิตตามสั่ง MOQ 200+ จะยืนยันหลังตรวจแบบ/สเปก/BOM
คอนเนคเตอร์ที่คล้ายกัน
คุณอาจสนใจรุ่นเหล่านี้ด้วย:
PE3218
7/16 DIN Male to N Male Cable Using RG214 Coax
L17HTHEP4R1CO
คอนเนคเตอร์ D-Sub มาตรฐาน D-SUB, Stamped Signal 3A, มุมฉาก PCB เสียบรู, สูง Temp สูง ความหนาแน่น, FP=8.89 mm (.350in), 15 พิน, Bright ดีบุก Shell+Grounding Dimples, Flash ทอง, 4-40 Rear Insert, Ground Tab และ Boardlock, Plastic Tray, Open Back
LCCA30200-FT4
L-com's LCCA30200-FT4 is a low loss 4.3-10 male to 4.3-10 male cable assembly using LMR-400-DB coax, 4 FT with Times Microwave components and ships same-day. The LMR-400-DB coax of this 4.3-10 cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 4.3-10 to 4.3-10 cable assembly has a male to male gender configuration with flexible LMR-400-DB series coax and operates to 6 GHz. The double shield of this 4.3-10 cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 4.3-10 male to 4.3-10 male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30200-FT4 L-com Low Loss 4.3-10 Male to 4.3-10 Male Cable Assembly using LMR-400-DB Coax, 4 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
1210640558
Circular DIN คอนเนคเตอร์ VST-A-FA PG9 DP / N A1 / ge 24
HRM-T-5
คอนเนคเตอร์ RF / คอนเนคเตอร์โคแอกเชียล RF คอนเนคเตอร์ BENDING CBL TOOL
557T071M123CT32
แบ็กเชลล์ D-Sub SLD BANDING BS TOP
ค้นหา MPN รองรับการค้นหาแบบตรงตัว คำนำหน้า และบางส่วน ⌄
ข้อจำกัดความรับผิดชอบ
ชื่อผู้ผลิต เครื่องหมายการค้า สัญลักษณ์ และหมายเลขชิ้นส่วนใช้เพื่อการระบุตัวตนและอ้างอิงข้ามเท่านั้น Cstone Technology เป็นพันธมิตรจัดหาสินค้าส่งออกจากประเทศจีนสำหรับทางเลือกที่เข้ากันได้ และไม่มีส่วนเกี่ยวข้องกับแบรนด์ดั้งเดิม เครื่องหมายการค้ายังคงเป็นทรัพย์สินของเจ้าของที่เกี่ยวข้อง ความเหมาะสมขั้นสุดท้ายได้รับการยืนยันโดยการตรวจสอบแบบ/สเปกระหว่าง RFQ