รายละเอียดสินค้า
Plenum 4.3-10 Female to 7/16 DIN Male Low PIM Cable Using SPP-250-LLPL Coax Using Times Microwave Parts
หมายเลขชิ้นส่วน (MPN)
อิมพีแดนซ์
50 Ohm
อินเทอร์เฟซ
4.3-10
ชุดสาย RF custom จากแบบ สำหรับ sourcing เพื่อการผลิต
ชุดสาย RF custom จากแบบ สำหรับการผลิต พร้อมตรวจ compatibility แนะนำ MOQ และสนับสนุน cost-down sourcing
ต้องเตรียมอะไรก่อน RFQ ข้อมูลที่ชัดเจนช่วยลดการคาดเดาและเร่งคำตอบที่เป็นประโยชน์ ⌄
- • แจ้ง MPN อ้างอิง ชิ้นส่วนที่เข้าคู่กัน หรือแบรนด์ต้นทาง หากเกี่ยวข้องกับการตรวจสอบ
- • เพิ่ม BOM การแบ่งจำนวน และความต้องการรายปี หากโครงการเกินขั้นต้นแบบ
- • แนบแบบ แผ่นข้อมูล หรือข้อกำหนดสำคัญด้านอิมพีแดนซ์ ความถี่ การติดตั้ง และการชุบ
รูปภาพ
คลิกเพื่อขยาย
Specifications
| อินเทอร์เฟซ | Cable Assemblies |
|---|---|
| อินเทอร์เฟซ | SPP-250-LLPL |
| อินเทอร์เฟซ | 4.3-10 |
| อินเทอร์เฟซ | 7/16 DIN |
| อิมพีแดนซ์ | 50 Ohm |
| อิมพีแดนซ์ | 50 Ohm |
| อิมพีแดนซ์ | 50 Ohm |
| เพศของคอนเนคเตอร์ | Female |
| เพศของคอนเนคเตอร์ | Male |
| ทิศทาง | Straight |
| ทิศทาง | Straight |
| Connector Polarity 1 | Standard |
Show 5 more specs
| การติดตั้ง | None |
|---|---|
| Connector Polarity 2 | Standard |
| การติดตั้ง | None |
| ประเภทสายเคเบิล | SPP-250-LLPL |
| Category | Cable Assemblies |
คำอธิบาย
ข้อมูลอ้างอิงปัจจุบันสำหรับ PE3C6233: 4.3-10 · 50 Ohm · Straight แคตตาล็อกระบุโครงแบบไว้เป็น: Straight อิมพีแดนซ์ระบุเป็น 50 Ohm หากค่านี้สำคัญ โปรดยืนยันอีกครั้งใน RFQ หากไม่มีข้อมูลการติดตั้งที่นี่ ให้ยืนยันจากแบบหรือข้อกำหนดการจับคู่ ใช้หน้านี้เพื่อคัดเลือกก่อน RFQ ไม่ใช่การอนุมัติขั้นสุดท้าย
ใช้หน้านี้เพื่อคัดกรองก่อน RFQ เส้นทางจัดหาและเส้นทางผลิตตามสั่ง MOQ 200+ จะยืนยันหลังตรวจแบบ/สเปก/BOM
คอนเนคเตอร์ที่คล้ายกัน
คุณอาจสนใจรุ่นเหล่านี้ด้วย:
FMCN1435
4.1/9.5 Mini DIN Female (Jack) Connector for SPP-250-LLPL Cable Low PIM, Solder
LCCA30340-FT1.5
L-com's LCCA30340-FT1.5 is a low loss 4.3-10 male to N female cable assembly using LMR-600 coax, 1.5 FT with Times Microwave components and ships same-day. The LMR-600 coax of this 4.3-10 cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 4.3-10 to N cable assembly has a male to female gender configuration with flexible LMR-600 series coax and operates to 5.8 GHz. The double shield of this 4.3-10 cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 4.3-10 male to 4.3-10 female cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30340-FT1.5 L-com Low Loss 4.3-10 Male to N Female Cable Assembly using LMR-600 Coax, 1.5 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
PE35963
7/16 DIN Male to N Male Cable Using RG402 Coax
CA-DMNFH125
High quality fully tested 7/16 DIN Male to Type N-Female cable assemblies featuring high performance 400-Series Ultra Flex coax cable. These cables are ideal for indoor or outdoor applications that require maximum flexibility due to curves, bends and twists. In addition these cables have excellent low loss characteristics.
PE3C8305
4.3-10 Male Right Angle to 7/16 DIN Male Low PIM Cable Using TFT-5G-402 Coax Using Times Microwave Components
C091-31C105-100-2
Circular DIN คอนเนคเตอร์ ตัวผู้ รีเซปแทเคิล 5 WAY
ค้นหา MPN รองรับการค้นหาแบบตรงตัว คำนำหน้า และบางส่วน ⌄
ข้อจำกัดความรับผิดชอบ
ชื่อผู้ผลิต เครื่องหมายการค้า สัญลักษณ์ และหมายเลขชิ้นส่วนใช้เพื่อการระบุตัวตนและอ้างอิงข้ามเท่านั้น Cstone Technology เป็นพันธมิตรจัดหาสินค้าส่งออกจากประเทศจีนสำหรับทางเลือกที่เข้ากันได้ และไม่มีส่วนเกี่ยวข้องกับแบรนด์ดั้งเดิม เครื่องหมายการค้ายังคงเป็นทรัพย์สินของเจ้าของที่เกี่ยวข้อง ความเหมาะสมขั้นสุดท้ายได้รับการยืนยันโดยการตรวจสอบแบบ/สเปกระหว่าง RFQ