รายละเอียดสินค้า
SMA Male Right Angle to SMA Female Low Loss Cable Using LMR-195 Coax with HeatShrink, LF Solder
หมายเลขชิ้นส่วน (MPN)
อิมพีแดนซ์
50 Ohm
อินเทอร์เฟซ
SMA
ชุดสาย RF custom จากแบบ สำหรับ sourcing เพื่อการผลิต
ชุดสาย RF custom จากแบบ สำหรับการผลิต พร้อมตรวจ compatibility แนะนำ MOQ และสนับสนุน cost-down sourcing
ต้องเตรียมอะไรก่อน RFQ ข้อมูลที่ชัดเจนช่วยลดการคาดเดาและเร่งคำตอบที่เป็นประโยชน์ ⌄
- • แจ้ง MPN อ้างอิง ชิ้นส่วนที่เข้าคู่กัน หรือแบรนด์ต้นทาง หากเกี่ยวข้องกับการตรวจสอบ
- • เพิ่ม BOM การแบ่งจำนวน และความต้องการรายปี หากโครงการเกินขั้นต้นแบบ
- • แนบแบบ แผ่นข้อมูล หรือข้อกำหนดสำคัญด้านอิมพีแดนซ์ ความถี่ การติดตั้ง และการชุบ
รูปภาพ
คลิกเพื่อขยาย
Specifications
| อินเทอร์เฟซ | Cable Assemblies |
|---|---|
| อินเทอร์เฟซ | LMR-195 |
| อินเทอร์เฟซ | SMA |
| อินเทอร์เฟซ | SMA |
| อิมพีแดนซ์ | 50 Ohm |
| อิมพีแดนซ์ | 50 Ohm |
| อิมพีแดนซ์ | 50 Ohm |
| เพศของคอนเนคเตอร์ | Male |
| เพศของคอนเนคเตอร์ | Female |
| ทิศทาง | Right Angle |
| ทิศทาง | Straight |
| Connector 1 Body Material | Brass |
Show 5 more specs
| Connector 1 Body Plating | Nickel |
|---|---|
| Connector 1 Polarity | Standard |
| Connector 2 Polarity | Standard |
| ประเภทสายเคเบิล | LMR-195 |
| Category | Cable Assemblies |
คำอธิบาย
ข้อมูลอ้างอิงปัจจุบันสำหรับ PE3C1590LF-HS: SMA · 50 Ohm · Right Angle แคตตาล็อกระบุโครงแบบไว้เป็น: Right Angle อิมพีแดนซ์ระบุเป็น 50 Ohm หากค่านี้สำคัญ โปรดยืนยันอีกครั้งใน RFQ หากไม่มีข้อมูลการติดตั้งที่นี่ ให้ยืนยันจากแบบหรือข้อกำหนดการจับคู่ วัสดุระบุเป็น Brass ข้อมูลนี้ช่วยตรวจสอบได้ แต่ไม่แทนการยืนยันโครงสร้างโครงการทั้งหมด ใช้หน้านี้เพื่อคัดเลือกก่อน RFQ ไม่ใช่การอนุมัติขั้นสุดท้าย
ใช้หน้านี้เพื่อคัดกรองก่อน RFQ เส้นทางจัดหาและเส้นทางผลิตตามสั่ง MOQ 200+ จะยืนยันหลังตรวจแบบ/สเปก/BOM
คอนเนคเตอร์ที่คล้ายกัน
คุณอาจสนใจรุ่นเหล่านี้ด้วย:
FMAD1732
RP SMA Male (Plug) to RP SMA Female (Jack) Bulkhead Mount Adapter, VSWR 1.2 up to 6 GHz, D-Flat
R302255006180
MML / ปลั๊ก H2.5 - SMA BULKHEAD แจ็ค SEAL ชุดสายเคเบิล 1.37 / 50 / S LGTH 180 mm
LCCA30686-FT1.5
L-com N female bulkhead to SMA female bulkhead cable assembly using RG58 coax, 1.5 FT is available for same day shipping from our facility. This high quality N cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30686-FT1.5 N cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF coaxial cable assemblies are built with N bulkhead connection on one end and SMA bulkhead connection on the other. This N to SMA cable from L-com has a female to female gender combination. Our N female to SMA female coaxial assembly part number LCCA30686-FT1.5 can also be known as N jack to SMA jack cable assembly when using alternate gender names. N jack to SMA jack cable assembly LCCA30686-FT1.5 is manufactured with a flexible coax. These flexible N to SMA cable assemblies use RG58 coax and are single shielded. L-com single shielded N female bulkhead to SMA female bulkhead cable assembly using RG58 coax, 1.5 FT is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these N to SMA F/F cables is 1 GHz. Technical performance specifications on these 1 GHz N femalebulkhead to SMA female bulkhead cables are located on the LCCA30686-FT1.5 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a SMA female bulkhead to N female bulkhead cable assembly because it can be used in the opposite direction.N female bulkhead to SMA female bulkhead cable assembly using RG58 coax, 1.5 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our N to SMA cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our N female bulkhead to SMA female bulkhead cable assembly using RG58 coax, 1.5 FT.
SMA-A-JJ(Au)
The SMA-A-JJ(Au) is an SMA adaptor connector. This connector is suitable for various high-frequency applications. It features a impedance 50Ω, operates up to 12.4GHz, and has a rated voltage of AC 330V, ensures a high insulation resistance (5000MΩ(Min.) at DC 500V), a low contact resistance (3 mΩ(Max.), and an excellent V.S.W.R 1.05+0.01F(Max.) at (100MHz~12.4GHz (F: GHz)). Withstanding temperatures from -40 to +85°C. The contact is made of Beryllium Copper/Gold Plating, while the body is Stainless/Gold Plating. We can customize our products for you. We offer total customization, including changes to a product's shape, length, material, surface treatment, and packaging. Available from 1 piece for in-stock items.Learn more about the SMA RF connector in our technical guide.
PE37841
NMO Mount to SMA Female Cable Using RG58 Coax
PE9733
RP-SMA Female to N Male Adapter
ค้นหา MPN รองรับการค้นหาแบบตรงตัว คำนำหน้า และบางส่วน ⌄
ข้อจำกัดความรับผิดชอบ
Cstone เป็นโรงงานมืออาชีพ ไม่ใช่บริษัทการค้า ผลิตคอนเนคเตอร์ RF และโคแอกเชียล อะแดปเตอร์ และชุดสาย รวมถึง N-type, BNC, SMA, SMP, SSMB และ MMCX เราผลิตคอนเนคเตอร์ตามแบบ 2D หรือตัวอย่าง และยืนยันความเหมาะสม MOQ ระยะเวลาจัดส่ง และรายละเอียดการผลิตผ่าน RFQ Cstone Technology ไม่มีความเกี่ยวข้องกับแบรนด์ต้นฉบับ