รายละเอียดสินค้า
SMA Female Bulkhead to SMA Female Bulkhead Cable Using RG174 Coax
หมายเลขชิ้นส่วน (MPN)
อิมพีแดนซ์
50
อินเทอร์เฟซ
SMA
ชุดสาย RF custom จากแบบ สำหรับ sourcing เพื่อการผลิต
ชุดสาย RF custom จากแบบ สำหรับการผลิต พร้อมตรวจ compatibility แนะนำ MOQ และสนับสนุน cost-down sourcing
ต้องเตรียมอะไรก่อน RFQ ข้อมูลที่ชัดเจนช่วยลดการคาดเดาและเร่งคำตอบที่เป็นประโยชน์ ⌄
- • แจ้ง MPN อ้างอิง ชิ้นส่วนที่เข้าคู่กัน หรือแบรนด์ต้นทาง หากเกี่ยวข้องกับการตรวจสอบ
- • เพิ่ม BOM การแบ่งจำนวน และความต้องการรายปี หากโครงการเกินขั้นต้นแบบ
- • แนบแบบ แผ่นข้อมูล หรือข้อกำหนดสำคัญด้านอิมพีแดนซ์ ความถี่ การติดตั้ง และการชุบ
รูปภาพ
คลิกเพื่อขยาย
Specifications
| อินเทอร์เฟซ | Cable Assemblies |
|---|---|
| อินเทอร์เฟซ | RG174 |
| อินเทอร์เฟซ | SMA |
| อินเทอร์เฟซ | SMA |
| อิมพีแดนซ์ | 50 |
| อิมพีแดนซ์ | 50 |
| อิมพีแดนซ์ | 50 |
| เพศของคอนเนคเตอร์ | Female |
| เพศของคอนเนคเตอร์ | Female |
| ทิศทาง | Straight |
| ทิศทาง | Straight |
| Connector Polarity 1 | Standard |
Show 5 more specs
| การติดตั้ง | Bulkhead |
|---|---|
| Connector Polarity 2 | Standard |
| การติดตั้ง | Bulkhead |
| ประเภทสายเคเบิล | RG174A/U |
| Category | Cable Assemblies |
คำอธิบาย
ข้อมูลอ้างอิงปัจจุบันสำหรับ PE33382: SMA · 50 · Bulkhead แคตตาล็อกระบุโครงแบบไว้เป็น: Straight อิมพีแดนซ์ระบุเป็น 50 หากค่านี้สำคัญ โปรดยืนยันอีกครั้งใน RFQ การติดตั้งระบุเป็น Bulkhead หากข้อจำกัดด้านแผง การติดตั้งทะลุผนัง หรือหน้าแปลนสำคัญ โปรดส่งมิติพร้อม RFQ ใช้หน้านี้เพื่อคัดเลือกก่อน RFQ ไม่ใช่การอนุมัติขั้นสุดท้าย
ใช้หน้านี้เพื่อคัดกรองก่อน RFQ เส้นทางจัดหาและเส้นทางผลิตตามสั่ง MOQ 200+ จะยืนยันหลังตรวจแบบ/สเปก/BOM
คอนเนคเตอร์ที่คล้ายกัน
คุณอาจสนใจรุ่นเหล่านี้ด้วย:
ADT-8000-MM-SMA-02
อะแดปเตอร์ RF - In ซีรีส์ อะแดปเตอร์ M / M SMA 18 GHz
PE3871
SMA Female Bulkhead to SMA Male Cable Using 75 Ohm RG59 Coax
A85E39-47S-
SMA แจ็ค bulkhead IP67 mated ถึง MMCX ปลั๊ก มุมฉาก using .047 conformable
SA8SMSF25W-50
50 dB Fixed Attenuator SMA Male (Plug) to SMA Female (Jack) Up to 6 GHz Rated to 25 Watts, Heatsink Body, 1.3 VSWR
095-902-602M100
SMA มุมฉาก ปลั๊ก ถึง SMA มุมฉาก ปลั๊ก RG-188 50 Ω 1 Meter
LCCA30247-FT1
L-com's LCCA30247-FT1 is a low loss BNC male to SMA male cable assembly using LMR-200-FR coax, 1 FT with Times Microwave components and ships same-day. The LMR-200-FR coax of this BNC cable uses the PE dielectric with a VoP of 83%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com BNC to SMA cable assembly has a male to male gender configuration with flexible LMR-200-FR series coax and operates to 5.8 GHz. The double shield of this BNC cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this BNC male to BNC male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30247-FT1 L-com Low Loss BNC Male to SMA Male Cable Assembly using LMR-200-FR Coax, 1 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
ค้นหา MPN รองรับการค้นหาแบบตรงตัว คำนำหน้า และบางส่วน ⌄
ข้อจำกัดความรับผิดชอบ
Cstone เป็นโรงงานมืออาชีพ ไม่ใช่บริษัทการค้า ผลิตคอนเนคเตอร์ RF และโคแอกเชียล อะแดปเตอร์ และชุดสาย รวมถึง N-type, BNC, SMA, SMP, SSMB และ MMCX เราผลิตคอนเนคเตอร์ตามแบบ 2D หรือตัวอย่าง และยืนยันความเหมาะสม MOQ ระยะเวลาจัดส่ง และรายละเอียดการผลิตผ่าน RFQ Cstone Technology ไม่มีความเกี่ยวข้องกับแบรนด์ต้นฉบับ