รายละเอียดสินค้า
N Straight Male 50 Ohm
หมายเลขชิ้นส่วน (MPN)
อิมพีแดนซ์
50 Ohm
อินเทอร์เฟซ
N
ชุดสาย RF custom จากแบบ สำหรับ sourcing เพื่อการผลิต
ชุดสาย RF custom จากแบบ สำหรับการผลิต พร้อมตรวจ compatibility แนะนำ MOQ และสนับสนุน cost-down sourcing
ต้องเตรียมอะไรก่อน RFQ ข้อมูลที่ชัดเจนช่วยลดการคาดเดาและเร่งคำตอบที่เป็นประโยชน์ ⌄
- • แจ้ง MPN อ้างอิง ชิ้นส่วนที่เข้าคู่กัน หรือแบรนด์ต้นทาง หากเกี่ยวข้องกับการตรวจสอบ
- • เพิ่ม BOM การแบ่งจำนวน และความต้องการรายปี หากโครงการเกินขั้นต้นแบบ
- • แนบแบบ แผ่นข้อมูล หรือข้อกำหนดสำคัญด้านอิมพีแดนซ์ ความถี่ การติดตั้ง และการชุบ
รูปภาพ
คลิกเพื่อขยาย
Specifications
| อินเทอร์เฟซ | Coaxial Cable Assemblies |
|---|---|
| อินเทอร์เฟซ | N |
| อินเทอร์เฟซ | N |
| อิมพีแดนซ์ | 50 Ohm |
| อิมพีแดนซ์ | 50 Ohm |
| อิมพีแดนซ์ | 50 Ohm |
| เพศของคอนเนคเตอร์ | Male |
| เพศของคอนเนคเตอร์ | Male |
| ทิศทาง | Straight |
| ทิศทาง | Straight |
| Connector 1 Polarity | Standard |
| Connector 2 Polarity | Standard |
Show 3 more specs
| Category | Coaxial Cable Assemblies |
|---|---|
| Application | Distributed Antenna Systems (DAS) protection; IEEE 802.11a/b/g/n wireless systems; Pre-made cables ideal for rapid deployment applications; Protect wireless devices and networks from damage due to lightning strikes |
| Product Features | Custom lengths and connectors available; Each assembly is fully tested ensuring the highest quality; Integral 5.8 GHz coax lightning surge protector with multi-strike capability and replaceable gas tube; Low loss CA-400 series coax cable |
คำอธิบาย
ข้อมูลอ้างอิงปัจจุบันสำหรับ CA4NMLPNM020: N · 50 Ohm · Straight แคตตาล็อกระบุโครงแบบไว้เป็น: Straight อิมพีแดนซ์ระบุเป็น 50 Ohm หากค่านี้สำคัญ โปรดยืนยันอีกครั้งใน RFQ หากไม่มีข้อมูลการติดตั้งที่นี่ ให้ยืนยันจากแบบหรือข้อกำหนดการจับคู่ ใช้หน้านี้เพื่อคัดเลือกก่อน RFQ ไม่ใช่การอนุมัติขั้นสุดท้าย
ใช้หน้านี้เพื่อคัดกรองก่อน RFQ เส้นทางจัดหาและเส้นทางผลิตตามสั่ง MOQ 200+ จะยืนยันหลังตรวจแบบ/สเปก/BOM
คอนเนคเตอร์ที่คล้ายกัน
คุณอาจสนใจรุ่นเหล่านี้ด้วย:
LCCA30182-FT10
L-com's LCCA30182-FT10 is a low loss N male to N female bulkhead cable assembly using LMR-240-DB coax, 10 FT with Times Microwave components and ships same-day. The LMR-240-DB coax of this N cable uses the PE (F) dielectric with a VoP of 84%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to N cable assembly has a male to female gender configuration with flexible LMR-240-DB series coax and operates to 5.8 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. L-com's RF cable assembly with N bulkhead interface enables system designers to have external connections on their product enclosures or to be used for other rack mount and panel mount applications. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N female cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30182-FT10 L-com Low Loss N Male to N Female Bulkhead Cable Assembly using LMR-240-DB Coax, 10 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
FMCA1310
Low PIM 4.3-10 Male to 7/16 DIN Male Plenum Cable SPP-250-LLPL Coax
CA-DMNMH025
High quality fully tested 7/16 DIN Male to Type N-Male cable assemblies featuring high performance 400-Series Ultra Flex coax cable. These cables are ideal for indoor or outdoor applications that require maximum flexibility due to curves, bends and twists. In addition these cables have excellent low loss characteristics.
LC3MSA00225-48
The L-com LC3MSA00225-48 MIL-STD-1553 flexible RF cable assembly is perfect for applications that need tight bends and flexible cable. This TRB 3-slot to blunt cut cable assembly is plug to blunt cut and made of 78 ohm flexible TWCH-78-2-LC twinax. Our 78 Ohm cable assembly is available with a HF POF jacket and a copper inner conductor with silver plating. We offer a blue, 0.57-inch OD TRB 3-slot to blunt cut cable that operates at 500 MHz.This blue RF cable assembly is the most commonly utilized cable assembly in wide connectivity applications such as bus couplers, avionics control boxes, and bus relay. L-com's LC3MSA00225-48 MIL-STD-1553 flexible RF cable assembly is available with PE dielectric. Our TRB 3-slot plug to blunt cut cable has bayonet coupling connectors made of brass with nickel plating. This RF flexible TWCH-78-2-LC twinax cable operates between -30 and 80 degrees Celsius.L-com has one of the largest in-stock selections of MIL-STD-1553 flexible RF cable assembly with same-day shipment for domestic and international orders. We are a global leader of wired and wireless connectivity products, offering a wide range of solutions across many key industries, including electronics, medical, industrial automation, military, and telecommunication. For further information on similar products, our expert technical support and trained sales team can get you the perfect TRB 3-slot plug to blunt cut cable as per your requirements.
LCCA30010-FT3
L-com Cable Assembly LCCA30010 is an N male to N female bulkhead 3 feet cable using 402SS Series coax that ships same-day. L-com's flexible RF cable assemblies are ideal for applications where tight bends and flexure are required. This L-com N to N cable assembly has a male to female gender configuration with 50 ohm flexible 402SS Series coax and operates to 18 GHz. Highly durable stainless-steel connectors and heavy-duty booting extend the life of this versatile flexible cable assembly. The double shield includes a silver plated copper braid over a silver plated copper spiral strip providing excellent shielding effectiveness greater than 110 dB. Custom versions of this cable assembly along with the rest of L-com's RF cable assemblies can be built and shipped same day. Other available RF cable assembly value added services include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for custom cable quotes.
C016 10K014 004 2
Circular DIN คอนเนคเตอร์ 14+PE ตัวผู้ สายเคเบิล คอนเนคเตอร์ พร้อม strain relief และ clamping ring. สำหรับ use พร้อม ย้ำ คอนแทค (sold separately).
ค้นหา MPN รองรับการค้นหาแบบตรงตัว คำนำหน้า และบางส่วน ⌄
ข้อจำกัดความรับผิดชอบ
Cstone เป็นโรงงานมืออาชีพ ไม่ใช่บริษัทการค้า ผลิตคอนเนคเตอร์ RF และโคแอกเชียล อะแดปเตอร์ และชุดสาย รวมถึง N-type, BNC, SMA, SMP, SSMB และ MMCX เราผลิตคอนเนคเตอร์ตามแบบ 2D หรือตัวอย่าง และยืนยันความเหมาะสม MOQ ระยะเวลาจัดส่ง และรายละเอียดการผลิตผ่าน RFQ Cstone Technology ไม่มีความเกี่ยวข้องกับแบรนด์ต้นฉบับ