รายละเอียดสินค้า
SMA ติดตั้งบนแผง แจ็ค 2-Hole Flange Round Post 50 Ω
หมายเลขชิ้นส่วน (MPN)
อิมพีแดนซ์
50
ความถี่
18
ชุดสาย RF custom จากแบบ สำหรับ sourcing เพื่อการผลิต
ชุดสาย RF custom จากแบบ สำหรับการผลิต พร้อมตรวจ compatibility แนะนำ MOQ และสนับสนุน cost-down sourcing
ต้องเตรียมอะไรก่อน RFQ ข้อมูลที่ชัดเจนช่วยลดการคาดเดาและเร่งคำตอบที่เป็นประโยชน์ ⌄
- • แจ้ง MPN อ้างอิง ชิ้นส่วนที่เข้าคู่กัน หรือแบรนด์ต้นทาง หากเกี่ยวข้องกับการตรวจสอบ
- • เพิ่ม BOM การแบ่งจำนวน และความต้องการรายปี หากโครงการเกินขั้นต้นแบบ
- • แนบแบบ แผ่นข้อมูล หรือข้อกำหนดสำคัญด้านอิมพีแดนซ์ ความถี่ การติดตั้ง และการชุบ
รูปภาพ
คลิกเพื่อขยาย
Specifications
| ผิวบอดี้ | นิกเกิล |
|---|---|
| วัสดุบอดี้ | ทองเหลือง |
| สายเคเบิล ประเภท (Terminates ถึง) | ไม่เกี่ยวข้อง |
| ผิวคอนแทค | ทอง |
| วัสดุคอนแทค | เบริลเลียมคอปเปอร์ |
| การเข้าปลายคอนแทค | บัดกรี |
| กลไกการล็อก | เกลียว |
| หมายเลขควบคุมการส่งออก | EAR99 |
| Extended Dielectric Length | 0.591 Inches (15.01 mm) |
| ความถี่ (สูงสุด) | 18 |
| เพศ | แจ็ค |
| ระดับ IP | ไม่ระบุ |
Show 15 more specs
| อิมพีแดนซ์ | 50 |
|---|---|
| วัสดุอินซูเลเตอร์ | PTFE |
| แยกวงจร | ไม่ |
| Low PIM | ไม่ |
| ผ่านมาตรฐาน MIL | ไม่ผ่านมาตรฐาน MIL |
| ไม่เป็นแม่เหล็ก | ไม่ |
| ทิศทาง | ตรง |
| คุณสมบัติการติดตั้งบนแผง | 2-Hole Flange |
| พอร์ต | 1 (Single Port) |
| ความยาวโพสต์ | 0.113 Inches (2.87 mm) |
| หมวดขนาด | Subminiature |
| อุณหภูมิ (สูงสุด °C) | 165 |
| อุณหภูมิ (ต่ำสุด °C) | -65 |
| รูปแบบการเข้าปลาย | Round Post |
| ทิศทางเกลียว | มาตรฐาน |
คำอธิบาย
ข้อมูลอ้างอิงปัจจุบันสำหรับ 901-9891-RFX: 50 · 18 อิมพีแดนซ์ระบุเป็น 50 หากค่านี้สำคัญ โปรดยืนยันอีกครั้งใน RFQ ความถี่ระบุเป็น 18 ขีดจำกัดใช้งานจริงยังขึ้นกับชุดประกอบ ชิ้นส่วนคู่ต่อ และบริบทการใช้งาน สำหรับโครงการความถี่สูง ให้แนบแบบ เส้นทางสาย และข้อกำหนดสำคัญตั้งแต่ RFQ แรก หากไม่มีข้อมูลการติดตั้งที่นี่ ให้ยืนยันจากแบบหรือข้อกำหนดการจับคู่ แคตตาล็อกยังระบุค่าการซีลหรือการป้องกัน ไม่ระบุ โปรดเทียบกับสภาพแวดล้อมใช้งานจริงใน RFQ ใช้หน้านี้เพื่อคัดเลือกก่อน RFQ ไม่ใช่การอนุมัติขั้นสุดท้าย
ใช้หน้านี้เพื่อคัดกรองก่อน RFQ เส้นทางจัดหาและเส้นทางผลิตตามสั่ง MOQ 200+ จะยืนยันหลังตรวจแบบ/สเปก/BOM
คอนเนคเตอร์ที่คล้ายกัน
คุณอาจสนใจรุ่นเหล่านี้ด้วย:
A80MC80-58-
SMA แจ็ค ถึง SMC แจ็ค using RG58
19K132-K00D3
อะแดปเตอร์ RF - ต่างซีรีส์ SMP แจ็ค- SMA แจ็ค อะแดปเตอร์ ตรง
R417130130
Attenuators - Interconnects ATT SMA 30DB 3 GHz
PE3W16219
Reverse Polarity TNC Jack Bulkhead to SMA Female Cable Using RG58 Coax
LCCA30046-FT2
L-com low loss N male to SMA male right angle cable assembly with heavy duty heat shrink boot using LL335i coax, 2 FT is available for same day shipping from our facility. This high quality N cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30046-FT2 N cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF low loss coaxial cable assemblies are built with N connection on one end and right angle SMA connection on the other. This low loss N to right angle SMA cable from L-com has a male to male gender combination. Our N male to SMA male coaxial assembly part number LCCA30046-FT2 can also be known as low loss N plug to right angle SMA plug cable assembly when using alternate gender names. N plug to SMA plug cable assembly LCCA30046-FT2 is manufactured with a flexible coax. These flexible N to SMA cable assemblies use LL335i coax and are triple shielded. L-com triple shielded low loss N male to SMA male right angle cable assembly with heavy duty heat shrink boot using LL335i coax, 2 FT is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these N to SMA M/M cables is 18 GHz. Technical performance specifications on these 18 GHz N male to SMA right angle male cables are located on the LCCA30046-FT2 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a low loss right angle SMA male to N male cable assembly because it can be used in the opposite direction.Low loss N male to SMA male right angle cable assembly with heavy duty heat shrink boot using LL335i coax, 2 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our N to right angle SMA cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our low loss N male to SMA male right angle cable assembly with heavy duty heat shrink boot using LL335i coax, 2 FT.
LCCA30697-FT1.5
L-com N male right angle to SMA female cable assembly using RG58 coax, 1.5 FT is available for same day shipping from our facility. This high quality N cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30697-FT1.5 N cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF coaxial cable assemblies are built with right angle N connection on one end and SMA connection on the other. This right angle N to SMA cable from L-com has a male to female gender combination. Our N male to SMA female coaxial assembly part number LCCA30697-FT1.5 can also be known as right angle N plug to SMA jack cable assembly when using alternate gender names. N plug to SMA jack cable assembly LCCA30697-FT1.5 is manufactured with a flexible coax. These flexible N to SMA cable assemblies use RG58 coax and are single shielded. L-com single shielded N male right angle to SMA female cable assembly using RG58 coax, 1.5 FT is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these N to SMA M/F cables is 1 GHz. Technical performance specifications on these 1 GHz N right angle male to SMA female cables are located on the LCCA30697-FT1.5 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a SMA female to right angle N male cable assembly because it can be used in the opposite direction.N male right angle to SMA female cable assembly using RG58 coax, 1.5 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our right angle N to SMA cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our N male right angle to SMA female cable assembly using RG58 coax, 1.5 FT.
ค้นหา MPN รองรับการค้นหาแบบตรงตัว คำนำหน้า และบางส่วน ⌄
ข้อจำกัดความรับผิดชอบ
Cstone เป็นโรงงานมืออาชีพ ไม่ใช่บริษัทการค้า ผลิตคอนเนคเตอร์ RF และโคแอกเชียล อะแดปเตอร์ และชุดสาย รวมถึง N-type, BNC, SMA, SMP, SSMB และ MMCX เราผลิตคอนเนคเตอร์ตามแบบ 2D หรือตัวอย่าง และยืนยันความเหมาะสม MOQ ระยะเวลาจัดส่ง และรายละเอียดการผลิตผ่าน RFQ Cstone Technology ไม่มีความเกี่ยวข้องกับแบรนด์ต้นฉบับ