CSTONE
Список RFQ

Детали изделия

TNC Male Right Angle Connector Clamp/Solder Attachment for RG213, RG214, RG8, RG9, RG11, RG225, RG393, RG144, RG216, RG215

Совместимый аналог из Китая — соответствие подтверждаем по чертежу или спецификации.

Номер детали (MPN)

PE4146

Импеданс

50 Ohm

Частота

DC

Интерфейс

TNC

кабельная РЧ-сборка по чертежу для production sourcing

кабельная РЧ-сборка по чертежу для production-oriented sourcing с проверкой совместимости, MOQ и cost-down.

RF-кабель по чертежу →
WhatsApp — быстрый ответ
Срок: 3–6 нед. | MOQ: 200+ шт.
Что подготовить до RFQ Чёткие вводные ускоряют проверку.
  • Укажите справочный MPN и исходный бренд, если это важно.
  • Для серийного проекта добавьте BOM и разбивку количества.
  • Приложите чертёж или ключевые требования к совместимости.

Изображение

Нажмите изображение, чтобы увеличить.

Изображение товара

PE4146 product photo

PE4146 product photo

Характеристики

Характеристики PE4146
ИнтерфейсRG213
ИнтерфейсRG214
ИнтерфейсRG8
ИнтерфейсRG9
ИнтерфейсRG11
ИнтерфейсRG225
ИнтерфейсRG393
ИнтерфейсRG144
ИнтерфейсRG216
ИнтерфейсRG215
ИнтерфейсConnectors
ИнтерфейсTNC
Показать ещё 9 характеристик
Импеданс50 Ohm
Частота (макс.)DC
Частота (макс.)11 GHz
Пол (Gender)Male
Body StyleRight Angle
PolarityStandard
Attachment MethodClamp/Solder
Тип монтажаNone
CategoryConnectors

Описание

Текущие справочные данные для PE4146: TNC · 50 Ohm · DC. Импеданс указан как 50 Ohm. Если параметр критичен, подтвердите его в RFQ. Частота указана как DC. Реальный рабочий предел зависит от сборки, ответной части и условий применения. Если монтаж здесь не указан, подтвердите его по чертежу или требованиям сопряжения. Используйте эту страницу для отбора перед RFQ, а не как финальное подтверждение.

Используйте эту страницу для отбора перед RFQ. Цепочка поставки и маршрут заказного производства MOQ 200+ подтверждаются после проверки чертежа/спецификации/BOM.

Похожие разъемы

Похожие модели:

LCCA30229-FT2

L-com's LCCA30229-FT2 is a low loss N male right angle to TNC male cable assembly using LMR-195 coax, 2 FT with Times Microwave components and ships same-day. The LMR-195 coax of this N cable uses the PE (F) dielectric with a VoP of 80%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to TNC cable assembly has a male to male gender configuration with flexible LMR-195 series coax and operates to 5.8 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. This right angle N cable interface on the LMR-195 coax allows for easier connections in tight spaces. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30229-FT2 L-com Low Loss N Male Right Angle to TNC Male Cable Assembly using LMR-195 Coax, 2 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.

Подробнее →

LCCA30288-FT5

L-com's LCCA30288-FT5 is a low loss N female bulkhead to TNC male right angle cable assembly using LMR-240-DB coax, 5 FT with Times Microwave components and ships same-day. The LMR-240-DB coax of this N cable uses the PE (F) dielectric with a VoP of 84%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to TNC cable assembly has a female to male gender configuration with flexible LMR-240-DB series coax and operates to 5.8 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. L-com's RF cable assembly with N bulkhead interface enables system designers to have external connections on their product enclosures or to be used for other rack mount and panel mount applications. This right angle TNC cable interface on the LMR-240-DB coax allows for easier connections in tight spaces. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N female to N male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30288-FT5 L-com Low Loss N Female Bulkhead to TNC Male Right Angle Cable Assembly using LMR-240-DB Coax, 5 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.

Подробнее →

6002-1071-019

TNC / прямой гнездо female обжим тип для 2.6/50 D кабель золото FRONT MOUNT|PANEL SEALED

Подробнее →

SA18TMTF25W-20

20 dB Fixed Attenuator TNC Male (Plug) to TNC Female (Jack) Up to 18 GHz Rated to 25 Watts, Heatsink Body, 1.6 VSWR

Подробнее →

TC-100-TM-LC

L-com's TNC Male connector for LMR-100A-PVC, RG174, RG188, RG316 and 100-Series coax uses a Crimp/Solder attachment method. This TNC connector is one of the many RF coaxial connectors in L-com’s product line up and like all our products, they will ship the same day. Our TNC Male connector operates in the frequency range supported by LMR-100A-PVC coax. &&The specifications and a basic dimensional drawing for TC-100-TM-LC Male TNC connector can be found in this datasheet PDF. L-com's portfolio of RF and microwave connectors allows users to choose from a large number of options when building assemblies to fit their RF interconnect needs. RF cables can be created to fulfill many interconnect applications ranging from In the Box hookup, test equipment connectivity or as part of a system installation. In addition to an offering of RF connectors and coaxial cable L-com offers both standard and custom cable assemblies to fit a customer's specific needs.

Подробнее →

031-6170

TNC Straight Crimp Jack Times LMR-200 Belden 7807A Bulkhead Rear Mount 50 Ohm

Подробнее →
Поиск MPN Поддержка: точное совпадение, префикс и частичное вхождение.

Поддержка: точное совпадение, префикс и частичное вхождение.

Отказ от ответственности

Cstone — профессиональная фабрика, а не торговая компания, по RF- и коаксиальным разъёмам, адаптерам и кабельным сборкам, включая N-type, BNC, SMA, SMP, SSMB и MMCX. Изготавливаем разъёмы по 2D-чертежам или образцам; совместимость, MOQ, срок поставки и детали производства подтверждаются через RFQ. Cstone Technology не аффилирована с оригинальными брендами. Названия производителей, товарные знаки, символы и номера деталей используются только для идентификации и перекрёстной ссылки. Товарные знаки принадлежат их владельцам. Окончательная пригодность подтверждается при анализе чертежа/спецификации в ходе RFQ.