Детали изделия
N Female Bulkhead to SMA Male Cable Using PE-SR405AL Coax
Номер детали (MPN)
Импеданс
50
Интерфейс
SMA
кабельная РЧ-сборка по чертежу для production sourcing
кабельная РЧ-сборка по чертежу для production-oriented sourcing с проверкой совместимости, MOQ и cost-down.
Что подготовить до RFQ Чёткие вводные ускоряют проверку. ⌄
- • Укажите справочный MPN и исходный бренд, если это важно.
- • Для серийного проекта добавьте BOM и разбивку количества.
- • Приложите чертёж или ключевые требования к совместимости.
Изображение
Нажмите изображение, чтобы увеличить.
Характеристики
| Интерфейс | Cable Assemblies |
|---|---|
| Интерфейс | PE-SR405AL |
| Интерфейс | SMA |
| Интерфейс | N |
| Импеданс | 50 |
| Импеданс | 50 |
| Импеданс | 50 |
| Пол (Gender) | Male |
| Пол (Gender) | Female |
| Ориентация | Straight |
| Ориентация | Straight |
| Connector Polarity 1 | Standard |
Показать ещё 5 характеристик
| Тип монтажа | None |
|---|---|
| Connector Polarity 2 | Standard |
| Тип монтажа | Bulkhead |
| Тип кабеля | PE-SR405AL |
| Category | Cable Assemblies |
Описание
Текущие справочные данные для PE34155: SMA · 50 · Bulkhead. В каталоге конфигурация указана как: Straight. Импеданс указан как 50. Если параметр критичен, подтвердите его в RFQ. Монтаж указан как Bulkhead. Если важны панель, проходной монтаж или фланец, отправьте размеры вместе с RFQ. Используйте эту страницу для отбора перед RFQ, а не как финальное подтверждение.
Используйте эту страницу для отбора перед RFQ. Цепочка поставки и маршрут заказного производства MOQ 200+ подтверждаются после проверки чертежа/спецификации/BOM.
Похожие разъемы
Похожие модели:
LCCA30696-FT5
L-com N male right angle to SMA male right angle cable assembly using RG58 coax, 5 FT is available for same day shipping from our facility. This high quality N cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30696-FT5 N cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF coaxial cable assemblies are built with right angle N connection on one end and right angle SMA connection on the other. This right angle N to right angle SMA cable from L-com has a male to male gender combination. Our N male to SMA male coaxial assembly part number LCCA30696-FT5 can also be known as right angle N plug to right angle SMA plug cable assembly when using alternate gender names. N plug to SMA plug cable assembly LCCA30696-FT5 is manufactured with a flexible coax. These flexible N to SMA cable assemblies use RG58 coax and are single shielded. L-com single shielded N male right angle to SMA male right angle cable assembly using RG58 coax, 5 FT is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these N to SMA M/M cables is 1 GHz. Technical performance specifications on these 1 GHz N right angle male to SMA right angle male cables are located on the LCCA30696-FT5 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a right angle SMA male to right angle N male cable assembly because it can be used in the opposite direction.N male right angle to SMA male right angle cable assembly using RG58 coax, 5 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our right angle N to right angle SMA cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our N male right angle to SMA male right angle cable assembly using RG58 coax, 5 FT.
SC8441
SMA Female (Jack) Bulkhead PCB Connector 0.056 End Launch, Solder
LCCA30261-FT3
L-com's LCCA30261-FT3 is a low loss QMA male right angle to SMA male cable assembly using LMR-240 coax, 3 FT with Times Microwave components and ships same-day. The LMR-240 coax of this QMA cable uses the PE (F) dielectric with a VoP of 84%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com QMA to SMA cable assembly has a male to male gender configuration with flexible LMR-240 series coax and operates to 5.8 GHz. The double shield of this QMA cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. This right angle QMA cable interface on the LMR-240 coax allows for easier connections in tight spaces. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this QMA male to QMA male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30261-FT3 L-com Low Loss QMA Male Right Angle to SMA Male Cable Assembly using LMR-240 Coax, 3 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
FMHR0137
Temperature Conditioned Low Loss SMA Female to RA SMA Male Cable LL142 Coax
CC-4NMSM030
Customers designed the L-com CC-4NMSM030 low loss N Male to SMA Male high running RF cable assembly with CA-400, which we now offer as a standard. This flexible 50 Ohm low loss cable is intended for use in laboratories, universities, communications, aerospace, and military defense sectors. Our male-to-male cable assembly includes 50 Ohm male-type connectors on both ends with crimp attachments and gold-plated brass contacts. Our RF cable is constructed with a solid copper clad aluminum center conductor and a PE dielectric, making it perfect for installers, manufacturers, and prototypes. This black RF cable assembly features a PE jacket with a diameter of 0.405 inches. The CC-4NMSM030 N Male to SMA Male low loss cable assembly has a maximum frequency of 5.8 GHz. Our between series cable assembly's maximum VSWR is 1.5:1. The L-com RF cable assembly is 30 feet long, with a minimum bend radius of 1 inch for single bends and 4 inches for repeated bends. Our 30-foot CA-400 cable assembly has an 85% velocity of propagation and a minimum RF shielding of 90 dB. L-com has the largest in-stock selection of CA-400 RF cable assemblies for international and domestic orders with same-day shipment. We are a global leader of wired and wireless connectivity products, offering a wide range of solutions across many key industries, including electronics, medical, industrial automation, military, and telecommunication. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect low loss N Male to SMA Male cable assembly for your requirements.
R125153901
SMA / угловой вилка обжим тип кабель .085
Поиск MPN Поддержка: точное совпадение, префикс и частичное вхождение. ⌄
Отказ от ответственности
Названия производителей, товарные знаки, символы и номера деталей используются только для идентификации и перекрёстной ссылки. Cstone Technology — китайский экспортный партнёр по совместимым альтернативам и не связана с оригинальными брендами. Товарные знаки принадлежат их владельцам. Окончательная пригодность подтверждается при анализе чертежа/спецификации в ходе RFQ.