Детали изделия
The ADM-1P200 connector is ideal for used with Distributed Antenna Systems (DAS) do to its excellent Passive InterModulation (PIM) performance of -160dBc. This 7/16 DIN Male connector is for use with RG402 cable. For additional information and complete specifications, see the 2D Drawing in Downloads section.
Номер детали (MPN)
Импеданс
50 Ohm
Частота
DC
Интерфейс
7/16 DIN
кабельная РЧ-сборка по чертежу для production sourcing
кабельная РЧ-сборка по чертежу для production-oriented sourcing с проверкой совместимости, MOQ и cost-down.
Что подготовить до RFQ Чёткие вводные ускоряют проверку. ⌄
- • Укажите справочный MPN и исходный бренд, если это важно.
- • Для серийного проекта добавьте BOM и разбивку количества.
- • Приложите чертёж или ключевые требования к совместимости.
Изображение
Нажмите изображение, чтобы увеличить.
Характеристики
| Интерфейс | RG402 |
|---|---|
| Интерфейс | Coaxial Connectors |
| Интерфейс | 7/16 DIN |
| Импеданс | 50 Ohm |
| Частота (макс.) | DC |
| Частота (макс.) | 2.7 GHz |
| Пол (Gender) | Male |
| Body Style | Straight |
| Polarity | Standard |
| Тип монтажа | None |
| Category | Coaxial Connectors |
| Application | Distributed antenna systems (DAS); IEEE 802.11b and 802.11g Wireless LAN applications; Low PIM coax cable assemblies |
Показать ещё 1 характеристик
| Product Features | For use with RG402 cable; Excellent Passive InterModulation performance of -160dBc; Plated brass body ideal for outdoor use |
|---|
Описание
Текущие справочные данные для ADM-1P200: 7/16 DIN · 50 Ohm · DC. Импеданс указан как 50 Ohm. Если параметр критичен, подтвердите его в RFQ. Частота указана как DC. Реальный рабочий предел зависит от сборки, ответной части и условий применения. Если монтаж здесь не указан, подтвердите его по чертежу или требованиям сопряжения. Используйте эту страницу для отбора перед RFQ, а не как финальное подтверждение.
Используйте эту страницу для отбора перед RFQ. Цепочка поставки и маршрут заказного производства MOQ 200+ подтверждаются после проверки чертежа/спецификации/BOM.
Похожие разъемы
Похожие модели:
80395784
The phase invariant MINIBEND CTR line of cable assemblies maintains the bend-to-the-end solderless connector termination technology and introduces industry-leading phase versus temperature performance with an absolute phase change of <300 ppm over a temperature range of -50°C to +125°C.
LC3MSA00578-24
The L-com LC3MSA00578-24 MIL-STD-1553 flexible RF cable assembly is perfect for applications that need tight bends and flexible cable. This TRB 3-slot to TRB 3-lug cable assembly is plug to jack and made of 78 ohm flexible TWCH-78-2-LC twinax. Our 78 Ohm cable assembly is available with a HF POF jacket and a copper inner conductor with silver plating. We offer a blue, 0.69-inch long TRB 3-slot to TRB 3-lug cable that operates at 500 MHz.This blue RF cable assembly is the most commonly utilized cable assembly in wide connectivity applications such as bus couplers, avionics control boxes, and bus relay. L-com's LC3MSA00578-24 MIL-STD-1553 flexible RF cable assembly is available with PE dielectric. Our TRB 3-slot plug to TRB 3-lug jack cable has bayonet coupling connectors made of brass with nickel plating. This RF flexible TWCH-78-2-LC twinax cable operates between -30 and 80 degrees Celsius.L-com has one of the largest in-stock selections of MIL-STD-1553 flexible RF cable assembly with same-day shipment for domestic and international orders. We are a global leader of wired and wireless connectivity products, offering a wide range of solutions across many key industries, including electronics, medical, industrial automation, military, and telecommunication. For further information on similar products, our expert technical support and trained sales team can get you the perfect TRB 3-slot plug to TRB 3-lug jack cable as per your requirements.
EZ-400-NMH-75-X-LC
L-com's N Male connector for LMR-400-75 coax uses a Crimp/Non-Solder Contact attachment method. This N connector is one of the many RF coaxial connectors in L-com’s product line up and like all our products, they will ship the same day. Our N Male connector operates up to a maximum frequency of 3 GHz. The specifications and a basic dimensional drawing for EZ-400-NMH-75-X-LC Male N connector can be found in this datasheet PDF. L-com's portfolio of RF and microwave connectors allows users to choose from a large number of options when building assemblies to fit their RF interconnect needs. RF cables can be created to fulfill many interconnect applications ranging from In the Box hookup, test equipment connectivity or as part of a system installation. In addition to an offering of RF connectors and coaxial cable L-com offers both standard and custom cable assemblies to fit a customer's specific needs.
931571517
Circular DIN разъёмы MAWI 50 SB
LCCA30347-FT3
L-com's LCCA30347-FT3 is a low loss 7/16 DIN male to N male right angle cable assembly using LMR-600-DB coax, 3 FT with Times Microwave components and ships same-day. The LMR-600-DB coax of this 7/16 DIN cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 7/16 DIN to N cable assembly has a male to male gender configuration with flexible LMR-600-DB series coax and operates to 5.8 GHz. The double shield of this 7/16 DIN cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. This right angle N cable interface on the LMR-600-DB coax allows for easier connections in tight spaces. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 7/16 DIN male to 7/16 DIN male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30347-FT3 L-com Low Loss 7/16 DIN Male to N Male Right Angle Cable Assembly using LMR-600-DB Coax, 3 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
LC3MP2377-60
The L-com LC3MP2377-60 MIL-STD-1553 flexible RF cable assembly is perfect for applications that need tight bends and flexible cable. This TRB 3-slot to TRB 2-slot cable assembly is plug to plug and made of 78 ohm flexible M17-176-00002-LC twinax. Our 78 Ohm cable assembly is available with a PFA jacket and a copper inner conductor with silver plating. We offer a blue, 0.57-inch OD TRB 3-slot to TRB 2-slot cable that operates at 10 MHz.This blue RF cable assembly is the most commonly utilized cable assembly in wide connectivity applications such as bus couplers, avionics control boxes, and bus relay. L-com's LC3MP2377-60 MIL-STD-1553 flexible RF cable assembly is available with PTFE dielectric. Our TRB 3-slot plug to TRB 2-slot plug cable has bayonet coupling connectors made of brass with nickel plating. This RF flexible M17-176-00002-LC twinax cable operates between -55 and 200 degrees Celsius.L-com has one of the largest in-stock selections of MIL-STD-1553 flexible RF cable assembly with same-day shipment for domestic and international orders. We are a global leader of wired and wireless connectivity products, offering a wide range of solutions across many key industries, including electronics, medical, industrial automation, military, and telecommunication. For further information on similar products, our expert technical support and trained sales team can get you the perfect TRB 3-slot plug to TRB 2-slot plug cable as per your requirements.
Поиск MPN Поддержка: точное совпадение, префикс и частичное вхождение. ⌄
Отказ от ответственности
Названия производителей, товарные знаки, символы и номера деталей используются только для идентификации и перекрёстной ссылки. Cstone Technology — китайский экспортный партнёр по совместимым альтернативам и не связана с оригинальными брендами. Товарные знаки принадлежат их владельцам. Окончательная пригодность подтверждается при анализе чертежа/спецификации в ходе RFQ.