CSTONE
Список RFQ

Детали изделия

SMA PCB сквозной монтаж угловой гнездо Bulkhead 50 Ω

Совместимый аналог из Китая — соответствие подтверждаем по чертежу или спецификации.

Номер детали (MPN)

901-10138

Импеданс

EAR99

Частота

12.4

кабельная РЧ-сборка по чертежу для production sourcing

кабельная РЧ-сборка по чертежу для production-oriented sourcing с проверкой совместимости, MOQ и cost-down.

RF-кабель по чертежу →
WhatsApp — быстрый ответ
Срок: 3–6 нед. | MOQ: 200+ шт.
Что подготовить до RFQ Чёткие вводные ускоряют проверку.
  • Укажите справочный MPN и исходный бренд, если это важно.
  • Для серийного проекта добавьте BOM и разбивку количества.
  • Приложите чертёж или ключевые требования к совместимости.

Изображение

Нажмите изображение, чтобы увеличить.

Изображение товара

901-10138 product photo

901-10138 product photo

1 / 2

Характеристики

Характеристики 901-10138
Импеданс50
Частота (макс.)12.4
Пол (Gender)Гнездо
ОриентацияУгловой
Тип монтажаBulkhead - Rear монтаж
Покрытие корпусаWhite Bronze
Материал корпусаЛатунь
Тип кабеляНеприменимо
Финиш контактаЗолото
Материал контактовБериллиевая медь
Терминация контактаПайка
Механизм фиксацииThreaded
Показать ещё 13 характеристик
Номер классификации экспортного контроляEAR99
IP защитаNot Rated
Материал изолятораPTFE
ИзолированныйНет
Низкий PIMНет
Сертификация MILNot Mil Qualified
НемагнитныйНет
Порты1 (Single Port)
размер CategorySubminiature
Темп. (макс °C)165
Темп. (мин °C)-65
Тип терминацииPCB - сквозной монтаж
Механизм фиксациистандартный

Описание

Текущие справочные данные для 901-10138: EAR99 · 12.4 · Bulkhead - Rear монтаж. В каталоге конфигурация указана как: Угловой. Импеданс указан как EAR99. Если параметр критичен, подтвердите его в RFQ. Частота указана как 12.4. Реальный рабочий предел зависит от сборки, ответной части и условий применения. Для высокочастотных проектов приложите чертёж, схему кабеля и критичные требования уже в первом RFQ. Монтаж указан как Bulkhead - Rear монтаж. Если важны панель, проходной монтаж или фланец, отправьте размеры вместе с RFQ. В каталоге также указан параметр герметизации/защиты: Not Rated. Сверьте его с реальными условиями эксплуатации в RFQ. Используйте эту страницу для отбора перед RFQ, а не как финальное подтверждение.

Используйте эту страницу для отбора перед RFQ. Цепочка поставки и маршрут заказного производства MOQ 200+ подтверждаются после проверки чертежа/спецификации/BOM.

Похожие разъемы

Похожие модели:

SC7118

SMA Female (Jack) Bulkhead Connector Pin Terminal, Solder, Passivated Stainless Steel Body, Length 0.66 In

Подробнее →

LCCA30475-FT2

L-com SMA male to N female cable assembly using LC141TBJ coax, 2 FT is available for same day shipping from our facility. This high quality SMA cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30475-FT2 SMA cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF coaxial cable assemblies are built with SMA connection on one end and N connection on the other. This SMA to N cable from L-com has a male to female gender combination. Our SMA male to N female coaxial assembly part number LCCA30475-FT2 can also be known as SMA plug to N jack cable assembly when using alternate gender names. SMA plug to N jack cable assembly LCCA30475-FT2 is manufactured with a formable coax. These formable SMA to N cable assemblies use LC141TBJ coax and are single shielded. L-com single shielded SMA male to N female cable assembly using LC141TBJ coax, 2 FT is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these SMA to N M/F cables is 10 GHz. Technical performance specifications on these 10 GHz SMA male to N female cables are located on the LCCA30475-FT2 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a N female to SMA male cable assembly because it can be used in the opposite direction.SMA male to N female cable assembly using LC141TBJ coax, 2 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our SMA to N cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our SMA male to N female cable assembly using LC141TBJ coax, 2 FT.

Подробнее →

LCCA30206-FT3

L-com's LCCA30206-FT3 is a low loss SMA male to SMA male cable assembly using LMR-400-DB coax, 3 FT with Times Microwave components and ships same-day. The LMR-400-DB coax of this SMA cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com SMA to SMA cable assembly has a male to male gender configuration with flexible LMR-400-DB series coax and operates to 6 GHz. The double shield of this SMA cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this SMA male to SMA male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30206-FT3 L-com Low Loss SMA Male to SMA Male Cable Assembly using LMR-400-DB Coax, 3 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.

Подробнее →

R302255002030

MML / вилка H2.5 - SMA вилка кабельная сборка 1.37/50/S LGTH 030CM

Подробнее →

R413809000

Attenuators - Interconnects ATTENUATOR SMA.86 9DB 18 GHz 2W 50 Ω

Подробнее →

03E-32S1-32S2-00458

RF кабельная сборка SMA угловой вилка-SMA ST вилка 18 in RG316U

Подробнее →
Поиск MPN Поддержка: точное совпадение, префикс и частичное вхождение.

Поддержка: точное совпадение, префикс и частичное вхождение.

Отказ от ответственности

Cstone — профессиональная фабрика, а не торговая компания, по RF- и коаксиальным разъёмам, адаптерам и кабельным сборкам, включая N-type, BNC, SMA, SMP, SSMB и MMCX. Изготавливаем разъёмы по 2D-чертежам или образцам; совместимость, MOQ, срок поставки и детали производства подтверждаются через RFQ. Cstone Technology не аффилирована с оригинальными брендами. Названия производителей, товарные знаки, символы и номера деталей используются только для идентификации и перекрёстной ссылки. Товарные знаки принадлежат их владельцам. Окончательная пригодность подтверждается при анализе чертежа/спецификации в ходе RFQ.