Detalhes do produto
The SMAP-SMAJ is an SMA adaptor connector. This connector is suitable for various high-frequency applications. It features a impedance 50Ω, operates up to 18GHz, and has a rated voltage of AC 500V, ensures a high insulation resistance (5000MΩ(Min.) at DC 500V), a low contact resistance (3 mΩ(Max.), and an excellent V.S.W.R 1.3(Max.) at DC~18GHz. Withstanding temperatures from -40 to +85°C. The contact is made of Beryllium Copper/Gold Plating, while the body is Brass/Gold Plating. We can customize our products for you. We offer total customization, including changes to a product's shape, length, material, surface treatment, and packaging. Available from 1 piece for in-stock items.Learn more about the SMA RF connector in our technical guide.
Número da peça (MPN)
cabo RF customizado a partir de desenho para sourcing de produção
cabo RF customizado a partir de desenho orientado à produção com revisão de compatibilidade, orientação de MOQ e suporte de sourcing cost-down.
O que preparar antes do RFQ Dados claros reduzem suposições e agilizam uma resposta útil. ⌄
- • Compartilhe o MPN de referência, a peça de acoplamento ou a marca de origem se for relevante para a revisão.
- • Adicione o BOM, a divisão de quantidade e a demanda anual se o projeto for além do volume de protótipo.
- • Anexe o desenho, a ficha técnica ou os requisitos críticos de impedância, frequência, montagem e revestimento.
Imagem
Clique para ampliar.
Specifications
| Interface | SMA Adaptor |
|---|---|
| Classificação IP | {'text': "The SMAP-SMAJ is an SMA adaptor connector. This connector is suitable for various high-frequency applications. It features a impedance 50Ω, operates up to 18GHz, and has a rated voltage of AC 500V, ensures a high insulation resistance (5000MΩ(Min.) at DC 500V), a low contact resistance (3 mΩ(Max.), and an excellent V.S.W.R 1.3(Max.) at DC~18GHz. Withstanding temperatures from -40 to +85°C. The contact is made of Beryllium Copper/Gold Plating, while the body is Brass/Gold Plating. We can customize our products for you. We offer total customization, including changes to a product's shape, length, material, surface treatment, and packaging. Available from 1 piece for in-stock items.Learn more about the SMA RF connector in our technical guide."} |
| Specifications | {'Connector Gender': 'Plug-Jack', 'Impedance (Ohms)': '50Ω', 'Rated Voltage AC': 'AC 500V', 'Operating Frequency Range': '18GHz', 'Insulation Resistance': '5000MΩ(Min.) at DC 500V', 'Withstand Voltage': 'AC 1000V(1 minute)', 'Contact Resistance': '3 mΩ(Max.)', 'V.S.W.R': '1.3(Max.) at DC~18GHz', 'Operating Temperature Range': '-40 to +85°C'} |
| Material/Plating/Attachment | {'Contact': 'Beryllium Copper/Gold Plating', 'Body': 'Brass/Gold Plating'} |
| Category | SMA Adaptor |
| Product Features | 50Ω; Adaptor; Products in stock; RoHS2 |
Descrição
Há um MPN de referência para SMAP-SMAJ; a confirmação final depende do desenho, especificação ou BOM. Se a montagem estiver ausente aqui, confirme-a pelo desenho ou pelo requisito de acoplamento. O material está listado como {'Contact': 'Beryllium Copper/Gold Plating', 'Body': 'Brass/Gold Plating'}. Isso ajuda na revisão, mas não substitui a confirmação completa da estrutura do projeto. Use esta página para pré-seleção antes do RFQ, não como aprovação final.
Use esta página para filtrar antes do RFQ. A rota de fornecimento e a produção sob medida MOQ 200+ são confirmadas após revisão do desenho/especificação/BOM.
Conectores similares
Você também pode se interessar por estes modelos:
R124256003W
Conectores RF / Conectores coaxiais SMA(F)FL REC 0.085SR
HRMJ-FLJ(40)
Adaptadores RF - entre séries ADAPT FL jack / SMA jack
PE45681
SMA Female Bulkhead Mount Low PIM Connector Solder Attachment for PE-1/4SFHC, SPP-250-LLPL, SPO-250, SPF-250
LCCA30245-FT10
L-com's LCCA30245-FT10 is a low loss SMA male to reverse polarity TNC female cable assembly using LMR-200-FR coax, 10 FT with Times Microwave components and ships same-day. The LMR-200-FR coax of this SMA cable uses the PE dielectric with a VoP of 83%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com SMA to TNC cable assembly has a male to female gender configuration with flexible LMR-200-FR series coax and operates to 5.8 GHz. The double shield of this SMA cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this SMA male to SMA female cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30245-FT10 L-com Low Loss SMA Male to Reverse Polarity TNC Female Cable Assembly using LMR-200-FR Coax, 10 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
2007-7188-00
Conectores RF / Conectores coaxiais SMA RT ângulo plugue
PE3C2279LF-HS
N Male to SMA Male Low Loss Cable Using LMR-200-UF Coax with Times Microwave Components with HeatShrink, LF Solder
Busca por MPN Suporta correspondência exata, por prefixo e parcial. ⌄
Isenção de responsabilidade
A Cstone é uma fábrica profissional, não uma empresa comercial, especializada em conectores RF e coaxiais, adaptadores e conjuntos de cabos, incluindo N-type, BNC, SMA, SMP, SSMB e MMCX. Fabricamos conectores conforme desenhos 2D ou amostras; compatibilidade, MOQ, prazo e detalhes de produção são confirmados no RFQ. A Cstone Technology não é afiliada às marcas originais. Nomes de fabricantes, marcas registradas, símbolos e números de peça são usados apenas para identificação e referência cruzada. As marcas registradas permanecem propriedade de seus respectivos donos. A adequação final é confirmada por revisão de desenho/especificação durante o RFQ.