CSTONE
Lista RFQ

Detalhes do produto

75 Ohm BNC Male Right Angle Connector Crimp/Solder Attachment for RG179, RG187

Alternativa compatível de origem chinesa — confirmamos o ajuste pelo seu desenho/especificação.

Número da peça (MPN)

PE4610

Impedância

75 Ohm

Frequência

DC

Interface

BNC

cabo RF customizado a partir de desenho para sourcing de produção

cabo RF customizado a partir de desenho orientado à produção com revisão de compatibilidade, orientação de MOQ e suporte de sourcing cost-down.

Cabo RF sob desenho →
WhatsApp — Resposta rápida
Prazo: 3–6 sem. | MOQ: 200+ un.
O que preparar antes do RFQ Dados claros reduzem suposições e agilizam uma resposta útil.
  • Compartilhe o MPN de referência, a peça de acoplamento ou a marca de origem se for relevante para a revisão.
  • Adicione o BOM, a divisão de quantidade e a demanda anual se o projeto for além do volume de protótipo.
  • Anexe o desenho, a ficha técnica ou os requisitos críticos de impedância, frequência, montagem e revestimento.

Imagem

Clique para ampliar.

Imagem do produto

PE4610 product photo

PE4610 product photo

Specifications

Specifications for PE4610
InterfaceRG179
InterfaceRG187
InterfaceConnectors
InterfaceBNC
Impedância75 Ohm
Frequência (máx.)DC
Frequência (máx.)500 MHz
GêneroMale
Body StyleRight Angle
PolarityStandard
Attachment MethodCrimp/Solder
MontagemNone
Show 1 more specs
CategoryConnectors

Descrição

Dados de referência atuais para PE4610: BNC · 75 Ohm · DC. A impedância está listada como 75 Ohm. Se esse parâmetro for crítico, confirme-o novamente no RFQ. A frequência está listada como DC. O limite real de operação ainda depende do conjunto, do par de acoplamento e do contexto de aplicação. Se a montagem estiver ausente aqui, confirme-a pelo desenho ou pelo requisito de acoplamento. Use esta página para pré-seleção antes do RFQ, não como aprovação final.

Use esta página para filtrar antes do RFQ. A rota de fornecimento e a produção sob medida MOQ 200+ são confirmadas após revisão do desenho/especificação/BOM.

Conectores similares

Você também pode se interessar por estes modelos:

27-9008

RF Terminators TERM. BNC 50 Ω com O STRAP 1 / 2W@1%

Ver detalhes →

33_BNC-N-50-51/---_UE

Adaptadores RF - entre séries BNC plug(m) para N jack(f)

Ver detalhes →

LCCA30700-FT1.5

L-com N male right angle to BNC male right angle cable assembly using RG58 coax, 1.5 FT is available for same day shipping from our facility. This high quality N cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30700-FT1.5 N cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF coaxial cable assemblies are built with right angle N connection on one end and right angle BNC connection on the other. This right angle N to right angle BNC cable from L-com has a male to male gender combination. Our N male to BNC male coaxial assembly part number LCCA30700-FT1.5 can also be known as right angle N plug to right angle BNC plug cable assembly when using alternate gender names. N plug to BNC plug cable assembly LCCA30700-FT1.5 is manufactured with a flexible coax. These flexible N to BNC cable assemblies use RG58 coax and are single shielded. L-com single shielded N male right angle to BNC male right angle cable assembly using RG58 coax, 1.5 FT is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these N to BNC M/M cables is 1 GHz. Technical performance specifications on these 1 GHz N right angle male to BNC right angle male cables are located on the LCCA30700-FT1.5 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a right angle BNC male to right angle N male cable assembly because it can be used in the opposite direction.N male right angle to BNC male right angle cable assembly using RG58 coax, 1.5 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our right angle N to right angle BNC cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our N male right angle to BNC male right angle cable assembly using RG58 coax, 1.5 FT.

Ver detalhes →

B30T80-179-

BNC plugue para TNC jack using RG179

Ver detalhes →

CO-059BNCX200-007.5

RF Conjunto de cabo CA BNC M / BNC M

Ver detalhes →

LCCA30690-FT6

L-com N female bulkhead to BNC female bulkhead cable assembly using RG58 coax, 6 FT is available for same day shipping from our facility. This high quality N cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30690-FT6 N cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF coaxial cable assemblies are built with N bulkhead connection on one end and BNC bulkhead connection on the other. This N to BNC cable from L-com has a female to female gender combination. Our N female to BNC female coaxial assembly part number LCCA30690-FT6 can also be known as N jack to BNC jack cable assembly when using alternate gender names. N jack to BNC jack cable assembly LCCA30690-FT6 is manufactured with a flexible coax. These flexible N to BNC cable assemblies use RG58 coax and are single shielded. L-com single shielded N female bulkhead to BNC female bulkhead cable assembly using RG58 coax, 6 FT is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these N to BNC F/F cables is 1 GHz. Technical performance specifications on these 1 GHz N femalebulkhead to BNC female bulkhead cables are located on the LCCA30690-FT6 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a BNC female bulkhead to N female bulkhead cable assembly because it can be used in the opposite direction.N female bulkhead to BNC female bulkhead cable assembly using RG58 coax, 6 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our N to BNC cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our N female bulkhead to BNC female bulkhead cable assembly using RG58 coax, 6 FT.

Ver detalhes →
Busca por MPN Suporta correspondência exata, por prefixo e parcial.

Suporta correspondência exata, por prefixo e parcial.

Isenção de responsabilidade

Nomes de fabricantes, marcas registradas, símbolos e números de peça são usados apenas para identificação e referência cruzada. A Cstone Technology é um parceiro de fornecimento de exportação baseado na China para alternativas compatíveis e não é afiliada às marcas originais. As marcas registradas permanecem propriedade de seus respectivos donos. A adequação final é confirmada por revisão de desenho/especificação durante o RFQ.