Detalhes do produto
4.1/9.5 Mini DIN Male to 4.3-10 Female Bulkhead Low PIM Cable Using TFT-5G-402 Coax Using Times Microwave Components
Número da peça (MPN)
Impedância
50 Ohm
Interface
4.1/9.5 Mini DIN
cabo RF customizado a partir de desenho para sourcing de produção
cabo RF customizado a partir de desenho orientado à produção com revisão de compatibilidade, orientação de MOQ e suporte de sourcing cost-down.
O que preparar antes do RFQ Dados claros reduzem suposições e agilizam uma resposta útil. ⌄
- • Compartilhe o MPN de referência, a peça de acoplamento ou a marca de origem se for relevante para a revisão.
- • Adicione o BOM, a divisão de quantidade e a demanda anual se o projeto for além do volume de protótipo.
- • Anexe o desenho, a ficha técnica ou os requisitos críticos de impedância, frequência, montagem e revestimento.
Imagem
Clique para ampliar.
Specifications
| Interface | Cable Assemblies |
|---|---|
| Interface | TFT-5G-402 |
| Interface | 4.1/9.5 Mini DIN |
| Interface | 4.3-10 |
| Impedância | 50 Ohm |
| Impedância | 50 Ohm |
| Impedância | 50 Ohm |
| Gênero | Male |
| Gênero | Female |
| Orientação | Straight |
| Orientação | Straight |
| Connector Polarity 1 | Standard |
Show 5 more specs
| Montagem | None |
|---|---|
| Connector Polarity 2 | Standard |
| Montagem | Bulkhead |
| Tipo de cabo | TFT-5G-402 |
| Category | Cable Assemblies |
Descrição
Dados de referência atuais para PE3C8279: 4.1/9.5 Mini DIN · 50 Ohm · Bulkhead. O catálogo lista a configuração como: Straight. A impedância está listada como 50 Ohm. Se esse parâmetro for crítico, confirme-o novamente no RFQ. A montagem está listada como Bulkhead. Se restrições de painel, passagem ou flange forem importantes, envie as dimensões com o RFQ. Use esta página para pré-seleção antes do RFQ, não como aprovação final.
Use esta página para filtrar antes do RFQ. A rota de fornecimento e a produção sob medida MOQ 200+ são confirmadas após revisão do desenho/especificação/BOM.
Conectores similares
Você também pode se interessar por estes modelos:
LCCA30340-FT5
L-com's LCCA30340-FT5 is a low loss 4.3-10 male to N female cable assembly using LMR-600 coax, 5 FT with Times Microwave components and ships same-day. The LMR-600 coax of this 4.3-10 cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 4.3-10 to N cable assembly has a male to female gender configuration with flexible LMR-600 series coax and operates to 5.8 GHz. The double shield of this 4.3-10 cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 4.3-10 male to 4.3-10 female cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30340-FT5 L-com Low Loss 4.3-10 Male to N Female Cable Assembly using LMR-600 Coax, 5 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
LMR-500-UF-LC-FT
LMR-500-UF-LC-FT coax cable from L-com is only one of a large number of radio frequency coaxial cable types specifically stocked to be ready for quick shipment. L-com LMR-500-UF-LC-FT coax cable is manufactured in a flexible design and has a 50 Ohm impedance. This low loss flexible 50 Ohm coax cable LMR-500-UF-LC-FT is constructed with a 0.500 inch diameter and Black TPE jacket. LMR-500-UF-LC-FT flexible 50 Ohm coax cable with PVC jacket is rated for a 5.8GHz maximum operating frequency. This 50 Ohm 0.500 inch diameter and low loss flexible coax cable is built with a double shield count and RF shielding of 90 dB. L-com LMR-500-UF-LC-FT coax is constructed with Foam PE dielectric and a maximum operating temperature of +85 degrees C. Times Microwave LMR-500-UF-LC-FT coax cable specs for this wire properties can be found on its RF coax cable LMR-500-UF-LC-FT datasheet. LMR-500-UF-LC-FT cable is part of more than one million RF, microwave parts in stock at L-com. This Times Microwave low loss LMR-500-UF-LC-FT coax cable is ready to buy and can be shipped worldwide. L-com also maintains a wide selection of other radio frequency coaxial cable types that ship same-day from our warehouse as with the rest of our other RF/microwave components. * LMR™ is a trademark of Times Microwave Systems.
SD-60
Circular DIN conectores 3 13 posições, modular plugue, padrão Circular DIN conector
06AL3F
DIN conectores
TC-240-NF-BH-X-LC
L-com's N Female connector for LMR-240, LMR-240-DB, LMR-240-FR and 240-Series coax uses a Crimp/Solder attachment method. This N connector is one of the many RF coaxial connectors in L-com’s product line up and like all our products, they will ship the same day. Our N Female connector operates up to a maximum frequency of 6 GHz. &&The specifications and a basic dimensional drawing for TC-240-NF-BH-X-LC Female N connector can be found in this datasheet PDF. L-com's portfolio of RF and microwave connectors allows users to choose from a large number of options when building assemblies to fit their RF interconnect needs. RF cables can be created to fulfill many interconnect applications ranging from In the Box hookup, test equipment connectivity or as part of a system installation. In addition to an offering of RF connectors and coaxial cable L-com offers both standard and custom cable assemblies to fit a customer's specific needs.
T3262-300
Circular DIN conectores macho receptáculo 3 WAY DIP solda TERM
Busca por MPN Suporta correspondência exata, por prefixo e parcial. ⌄
Isenção de responsabilidade
Nomes de fabricantes, marcas registradas, símbolos e números de peça são usados apenas para identificação e referência cruzada. A Cstone Technology é um parceiro de fornecimento de exportação baseado na China para alternativas compatíveis e não é afiliada às marcas originais. As marcas registradas permanecem propriedade de seus respectivos donos. A adequação final é confirmada por revisão de desenho/especificação durante o RFQ.