Detalhes do produto
Hermetically Sealed SMA Female to SMA Female Bulkhead Mount Adapter, 18GHz VSWR1.2, MIL-STD 348B
Número da peça (MPN)
Impedância
50 Ohm
Frequência
DC
Interface
SMA
cabo RF customizado a partir de desenho para sourcing de produção
cabo RF customizado a partir de desenho orientado à produção com revisão de compatibilidade, orientação de MOQ e suporte de sourcing cost-down.
O que preparar antes do RFQ Dados claros reduzem suposições e agilizam uma resposta útil. ⌄
- • Compartilhe o MPN de referência, a peça de acoplamento ou a marca de origem se for relevante para a revisão.
- • Adicione o BOM, a divisão de quantidade e a demanda anual se o projeto for além do volume de protótipo.
- • Anexe o desenho, a ficha técnica ou os requisitos críticos de impedância, frequência, montagem e revestimento.
Imagem
Clique para ampliar.
Specifications
| Interface | Adapters |
|---|---|
| Interface | SMA |
| Interface | SMA |
| Impedância | 50 Ohm |
| Impedância | 50 Ohm |
| Frequência (máx.) | DC |
| Frequência (máx.) | 18 GHz |
| Gênero | Female |
| Gênero | Female |
| Adapter Body Style | Straight |
| Connector Body Material 1 | Brass |
| Connector Body Material 2 | Brass |
Show 7 more specs
| Connector Body Plating 1 | Gold |
|---|---|
| Connector Body Plating 2 | Gold |
| Connector Polarity 1 | Standard |
| Connector Polarity 2 | Standard |
| Montagem | None |
| Montagem | Bulkhead |
| Category | Adapters |
Descrição
Dados de referência atuais para PE1358: SMA · 50 Ohm · DC. A impedância está listada como 50 Ohm. Se esse parâmetro for crítico, confirme-o novamente no RFQ. A frequência está listada como DC. O limite real de operação ainda depende do conjunto, do par de acoplamento e do contexto de aplicação. A montagem está listada como Bulkhead. Se restrições de painel, passagem ou flange forem importantes, envie as dimensões com o RFQ. O material está listado como Brass. Isso ajuda na revisão, mas não substitui a confirmação completa da estrutura do projeto. Use esta página para pré-seleção antes do RFQ, não como aprovação final.
Use esta página para filtrar antes do RFQ. A rota de fornecimento e a produção sob medida MOQ 200+ são confirmadas após revisão do desenho/especificação/BOM.
Conectores similares
Você também pode se interessar por estes modelos:
LCCA30539-FT4
L-com SMA male to N male cable assembly using LC085TB coax, 4 FT is available for same day shipping from our facility. This high quality SMA cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30539-FT4 SMA cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF coaxial cable assemblies are built with SMA connection on one end and N connection on the other. This SMA to N cable from L-com has a male to male gender combination. Our SMA male to N male coaxial assembly part number LCCA30539-FT4 can also be known as SMA plug to N plug cable assembly when using alternate gender names. SMA plug to N plug cable assembly LCCA30539-FT4 is manufactured with a formable coax. These formable SMA to N cable assemblies use LC085TB coax and are single shielded. L-com single shielded SMA male to N male cable assembly using LC085TB coax, 4 FT is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these SMA to N M/M cables is 11 GHz. Technical performance specifications on these 11 GHz SMA male to N male cables are located on the LCCA30539-FT4 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a N male to SMA male cable assembly because it can be used in the opposite direction.SMA male to N male cable assembly using LC085TB coax, 4 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our SMA to N cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our SMA male to N male cable assembly using LC085TB coax, 4 FT.
LCCA30290-FT1.5
L-com's LCCA30290-FT1.5 is a low loss N male right angle to SMA male cable assembly using LMR-400 coax, 1.5 FT with Times Microwave components and ships same-day. The LMR-400 coax of this N cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to SMA cable assembly has a male to male gender configuration with flexible LMR-400 series coax and operates to 6 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. This right angle N cable interface on the LMR-400 coax allows for easier connections in tight spaces. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30290-FT1.5 L-com Low Loss N Male Right Angle to SMA Male Cable Assembly using LMR-400 Coax, 1.5 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
SMA8400C-0000
SMA jack Montagem em PCB com round contato (0.95) 18 GHz VSWR1.2
LCCA30005-FT1
L-com Cable Assembly LCCA30005 is an N male to SMA male 1 foot cable using 402SS Series coax that ships same-day. L-com's flexible RF cable assemblies are ideal for applications where tight bends and flexure are required. This L-com N to SMA cable assembly has a male to male gender configuration with 50 ohm flexible 402SS Series coax and operates to 18 GHz. Highly durable stainless-steel connectors and heavy-duty booting extend the life of this versatile flexible cable assembly. The double shield includes a silver plated copper braid over a silver plated copper spiral strip providing excellent shielding effectiveness greater than 110 dB. Custom versions of this cable assembly along with the rest of L-com's RF cable assemblies can be built and shipped same day. Other available RF cable assembly value added services include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for custom cable quotes.
CSI-SGFB-300-UFFR
RF Conjunto de cabo SMA ouro fêmea bulkhead (CONSMA005B-G-1.13) para Ângulo reto U.FL fêmea (CONUFL012-1.13) com 300 mm of 1.13 mm cabo
R302205002375
MML / plugue H2.0 - SMA plugue Conjunto de cabo 1.13 / 50 / S LGTH 375CM
Busca por MPN Suporta correspondência exata, por prefixo e parcial. ⌄
Isenção de responsabilidade
A Cstone é uma fábrica profissional, não uma empresa comercial, especializada em conectores RF e coaxiais, adaptadores e conjuntos de cabos, incluindo N-type, BNC, SMA, SMP, SSMB e MMCX. Fabricamos conectores conforme desenhos 2D ou amostras; compatibilidade, MOQ, prazo e detalhes de produção são confirmados no RFQ. A Cstone Technology não é afiliada às marcas originais. Nomes de fabricantes, marcas registradas, símbolos e números de peça são usados apenas para identificação e referência cruzada. As marcas registradas permanecem propriedade de seus respectivos donos. A adequação final é confirmada por revisão de desenho/especificação durante o RFQ.