Detalhes do produto
L-com's LCCA30249-FT2 is a low loss N male to reverse polarity TNC female cable assembly using LMR-200-FR coax, 2 FT with Times Microwave components and ships same-day. The LMR-200-FR coax of this N cable uses the PE dielectric with a VoP of 83%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to TNC cable assembly has a male to female gender configuration with flexible LMR-200-FR series coax and operates to 5.8 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N female cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30249-FT2 L-com Low Loss N Male to Reverse Polarity TNC Female Cable Assembly using LMR-200-FR Coax, 2 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
Número da peça (MPN)
Impedância
50 Ohm
Interface
N
cabo RF customizado a partir de desenho para sourcing de produção
cabo RF customizado a partir de desenho orientado à produção com revisão de compatibilidade, orientação de MOQ e suporte de sourcing cost-down.
O que preparar antes do RFQ Dados claros reduzem suposições e agilizam uma resposta útil. ⌄
- • Compartilhe o MPN de referência, a peça de acoplamento ou a marca de origem se for relevante para a revisão.
- • Adicione o BOM, a divisão de quantidade e a demanda anual se o projeto for além do volume de protótipo.
- • Anexe o desenho, a ficha técnica ou os requisitos críticos de impedância, frequência, montagem e revestimento.
Imagem
Clique para ampliar.
Specifications
| Interface | Coaxial Cable Assemblies |
|---|---|
| Interface | LMR-200-FR |
| Interface | N |
| Interface | TNC |
| Impedância | 50 Ohm |
| Impedância | 50 Ohm |
| Impedância | 50 Ohm |
| Gênero | Male |
| Gênero | Female |
| Orientação | Straight |
| Orientação | Straight |
| Connector 1 Body Material | Brass |
Show 5 more specs
| Connector 1 Body Plating | Tri-Metal |
|---|---|
| Connector 1 Polarity | Standard |
| Connector 2 Polarity | Reverse Polarity |
| Tipo de cabo | LMR-200-FR |
| Category | Coaxial Cable Assemblies |
Descrição
Dados de referência atuais para LCCA30249-FT2: N · 50 Ohm · Straight. O catálogo lista a configuração como: Straight. A impedância está listada como 50 Ohm. Se esse parâmetro for crítico, confirme-o novamente no RFQ. Se a montagem estiver ausente aqui, confirme-a pelo desenho ou pelo requisito de acoplamento. O material está listado como Brass. Isso ajuda na revisão, mas não substitui a confirmação completa da estrutura do projeto. Use esta página para pré-seleção antes do RFQ, não como aprovação final.
Use esta página para filtrar antes do RFQ. A rota de fornecimento e a produção sob medida MOQ 200+ são confirmadas após revisão do desenho/especificação/BOM.
Conectores similares
Você também pode se interessar por estes modelos:
T60T85-141S-
TNC reversa polaridade plugue para TNC jack bulkhead using .141 conformable
STT1841
TNC Male (Plug) Termination (Load) 2 Watts To 18 GHz, Tri-Metal Plated Brass, 1.5 VSWR
BAC537
This TNC Right Angle male connector has been specifically designed for a crimp style attachment to RG174/188/316 type cable. The connector body and crimp sleeve are machined and nickel plated for superior corrosion resistance and durability. Gold plating is utilized on the center pin for low contact resistance. This precision manufactured connector is available from stock for immediate delivery.
LCCA30148-FT5
L-com TNC male right angle to TNC female bulkhead cable assembly using LC085TBJ coax, 5 FT is available for same day shipping from our facility. This high quality TNC cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30148-FT5 TNC cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF coaxial cable assemblies are built with right angle TNC connection on one end and TNC bulkhead connection on the other. This right angle TNC to TNC cable from L-com has a male to female gender combination. Our TNC male to TNC female coaxial assembly part number LCCA30148-FT5 can also be known as right angle TNC plug to TNC jack cable assembly when using alternate gender names. TNC plug to TNC jack cable assembly LCCA30148-FT5 is manufactured with a formable coax.Maximum frequency for these TNC to TNC M/F cables is 6 GHz. Technical performance specifications on these 6 GHz TNC right angle male to TNC female bulkhead cables are located on the LCCA30148-FT5 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a TNC female bulkhead to right angle TNC male cable assembly because it can be used in the opposite direction.TNC male right angle to TNC female bulkhead cable assembly using LC085TBJ coax, 5 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our right angle TNC to TNC cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our TNC male right angle to TNC female bulkhead cable assembly using LC085TBJ coax, 5 FT.
LCCA30223-FT6
L-com's LCCA30223-FT6 is a low loss TNC male to TNC male cable assembly using LMR-600-DB coax, 6 FT with Times Microwave components and ships same-day. The LMR-600-DB coax of this TNC cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com TNC to TNC cable assembly has a male to male gender configuration with flexible LMR-600-DB series coax and operates to 5.8 GHz. The double shield of this TNC cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this TNC male to TNC male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30223-FT6 L-com Low Loss TNC Male to TNC Male Cable Assembly using LMR-600-DB Coax, 6 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
R143082027
TNC / reto plugue FULL crimpagem tipo cabo 5 / 50 S
Busca por MPN Suporta correspondência exata, por prefixo e parcial. ⌄
Isenção de responsabilidade
A Cstone é uma fábrica profissional, não uma empresa comercial, especializada em conectores RF e coaxiais, adaptadores e conjuntos de cabos, incluindo N-type, BNC, SMA, SMP, SSMB e MMCX. Fabricamos conectores conforme desenhos 2D ou amostras; compatibilidade, MOQ, prazo e detalhes de produção são confirmados no RFQ. A Cstone Technology não é afiliada às marcas originais. Nomes de fabricantes, marcas registradas, símbolos e números de peça são usados apenas para identificação e referência cruzada. As marcas registradas permanecem propriedade de seus respectivos donos. A adequação final é confirmada por revisão de desenho/especificação durante o RFQ.