CSTONE
Lista RFQ

Detalhes do produto

L-com now offers 50 Ohm, SMA RG174/U coaxial cable assemblies with rugged molded strain relief boots that protect against severe cable bends at the cable/connector egress point. This new L-com exclusive RG174/U molded boot design is a hard to find feature that most coaxial cable manufacturers do not offer. This series employs a right angle SMA connector on one end for tight fit applications. Additionally, L-com stocks 5 standard lengths from .5 to 5 ft ready for immediate delivery.

Alternativa compatível de origem chinesa — confirmamos o ajuste pelo seu desenho/especificação.

Número da peça (MPN)

CC174S-1HR

Impedância

50 Ohm

Interface

SMA

cabo RF customizado a partir de desenho para sourcing de produção

cabo RF customizado a partir de desenho orientado à produção com revisão de compatibilidade, orientação de MOQ e suporte de sourcing cost-down.

Cabo RF sob desenho →
WhatsApp — Resposta rápida
Prazo: 3–6 sem. | MOQ: 200+ un.
O que preparar antes do RFQ Dados claros reduzem suposições e agilizam uma resposta útil.
  • Compartilhe o MPN de referência, a peça de acoplamento ou a marca de origem se for relevante para a revisão.
  • Adicione o BOM, a divisão de quantidade e a demanda anual se o projeto for além do volume de protótipo.
  • Anexe o desenho, a ficha técnica ou os requisitos críticos de impedância, frequência, montagem e revestimento.

Imagem

Clique para ampliar.

Imagem do produto

CC174S-1HR product photo

CC174S-1HR product photo

1 / 2

Specifications

Specifications for CC174S-1HR
InterfaceCoaxial Cable Assemblies
InterfaceRG174
InterfaceSMA
InterfaceSMA
Impedância50 Ohm
Impedância50 Ohm
Impedância50 Ohm
GêneroMale
GêneroMale
OrientaçãoStraight
OrientaçãoRight Angle
Connector 1 PolarityStandard
Show 4 more specs
Connector 2 PolarityStandard
CategoryCoaxial Cable Assemblies
ApplicationData Transmission; GPS; RFID; Test and Measurement; Wireless Infrastructure
Product FeaturesCrimp style SMA ensures secure construction; SMA straight to SMA right angle connector combination accommodates tight fit applications; Used to connect 50 Ohm equipment with SMA interfaces; Exclusive molded strain relief provides superior durability; Stranded center conductor enhances flexibility

Descrição

Dados de referência atuais para CC174S-1HR: SMA · 50 Ohm · Straight. O catálogo lista a configuração como: Straight. A impedância está listada como 50 Ohm. Se esse parâmetro for crítico, confirme-o novamente no RFQ. Se a montagem estiver ausente aqui, confirme-a pelo desenho ou pelo requisito de acoplamento. Use esta página para pré-seleção antes do RFQ, não como aprovação final.

Use esta página para filtrar antes do RFQ. A rota de fornecimento e a produção sob medida MOQ 200+ são confirmadas após revisão do desenho/especificação/BOM.

Conectores similares

Você também pode se interessar por estes modelos:

A90S30-85T-

SMA reversa polaridade jack para SMB plugue using .085 semi-rigid

Ver detalhes →

LCCA30256/WP-FT4

The L-com LCCA30256/WP-FT4 is a weatherproof low loss cable assembly that comes with SMA male connection with weatherproof boot on one end and type N female with weatherproof boot on the other. L-com’s RF coaxial cable assembly products are designed for typical use, production, laboratory test and measurement, defense/military, aerial antenna towers, etc. The low loss cable has a 50 Ohm impedance and is specifically ready for quicker shipment than most in the industry can provide.This weatherproof low loss RF cable assembly operates at a maximum frequency of 6 GHz. Our RF cable assembly has a PE jacket with 0.240 inches diameter. The SMA male to type N female cable assembly LCCA30256/WP-FT4 is built with LMR-240 coax, which has a flexible design.This RF cable assembly with 0.5 inches diameter has copper as cable’s inner conducting material and PE (F) dielectric type. The weatherproof boot low loss cable is reusable and can withstand elements including extreme temperature. Additional dimensions, specifications, and CAD drawings for this LCCA30256/WP-FT4 low loss RF cable are available on our downloadable PDF datasheet.L-com stocks a wide selection of weatherproof low loss cable assemblies that ship the same business day as ordered from our warehouse. Make your online purchase right now to take advantage of our same-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal SMA male to type N female cable assembly as per your requirements.

Ver detalhes →

SMA8401A-0000

SMA jack Montagem em PCB end launch (T=1.59) com round contato (0.78) 18 GHz VSWR1.2

Ver detalhes →

Telegartner: SMA Angle Plug Crimp G07

Telegartner: SMA Angle Plug Crimp G07, C0403, G07 (RG-316/U), Gold (Standard) (packed per 1)

Ver detalhes →

PE3W12773

Reverse Polarity SMA Male Right Angle to Reverse Polarity SMA Female Bulkhead Cable Using RG58 Coax

Ver detalhes →

LCCA30721-3IN

L-com test probe SMA male to trimmed lead cable assembly using LC085TB coax is available for same day shipping from our facility. This high quality SMA cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30721 SMA cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF test probe coaxial cable assemblies are built with SMA connection on one end and Trimmed Lead connection on the other. This test probe SMA to Trimmed Lead cable from L-com has a male to sexless gender combination. Our SMA male to Trimmed Lead sexless coaxial assembly part number LCCA30721 can also be known as test probe SMA plug to Trimmed Lead sexless cable assembly when using alternate gender names. SMA plug to Trimmed Lead sexless cable assembly LCCA30721 is manufactured with a formable coax. These formable SMA to Trimmed Lead cable assemblies use LC085TB coax and are single shielded. L-com single shielded test probe SMA male to trimmed lead cable assembly using LC085TB coax is built from quality components by skilled assemblers with many years of experience. Technical performance specifications on these SMA male to Trimmed Lead sexless cables are located on the LCCA30721 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a test probe Trimmed Lead sexless to SMA male cable assembly because it can be used in the opposite direction.Test probe SMA male to trimmed lead cable assembly using LC085TB coax is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our SMA to Trimmed Lead cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our test probe SMA male to trimmed lead cable assembly using LC085TB coax.

Ver detalhes →
Busca por MPN Suporta correspondência exata, por prefixo e parcial.

Suporta correspondência exata, por prefixo e parcial.

Isenção de responsabilidade

A Cstone é uma fábrica profissional, não uma empresa comercial, especializada em conectores RF e coaxiais, adaptadores e conjuntos de cabos, incluindo N-type, BNC, SMA, SMP, SSMB e MMCX. Fabricamos conectores conforme desenhos 2D ou amostras; compatibilidade, MOQ, prazo e detalhes de produção são confirmados no RFQ. A Cstone Technology não é afiliada às marcas originais. Nomes de fabricantes, marcas registradas, símbolos e números de peça são usados apenas para identificação e referência cruzada. As marcas registradas permanecem propriedade de seus respectivos donos. A adequação final é confirmada por revisão de desenho/especificação durante o RFQ.