Detalhes do produto
RP-TNC reto crimpagem jack Times LMR-400 Optimized Bulkhead Rear montagem 50 Ω
Número da peça (MPN)
Impedância
50
Frequência
8
cabo RF customizado a partir de desenho para sourcing de produção
cabo RF customizado a partir de desenho orientado à produção com revisão de compatibilidade, orientação de MOQ e suporte de sourcing cost-down.
O que preparar antes do RFQ Dados claros reduzem suposições e agilizam uma resposta útil. ⌄
- • Compartilhe o MPN de referência, a peça de acoplamento ou a marca de origem se for relevante para a revisão.
- • Adicione o BOM, a divisão de quantidade e a demanda anual se o projeto for além do volume de protótipo.
- • Anexe o desenho, a ficha técnica ou os requisitos críticos de impedância, frequência, montagem e revestimento.
Imagem
Clique para ampliar.
Specifications
| Acabamento do corpo | Níquel |
|---|---|
| Material do corpo | Latão |
| Classificação IP | Times LMR-400 Optimized, Times LMR-400 UltraFlex Optimized |
| Acabamento de contato | Ouro |
| Material de contato | Latão |
| Terminação de contato | Solda |
| Mecanismo de acoplamento | Rosqueado |
| Número de classificação de controle de exportação | EAR99 |
| Frequência (máx.) | 8 |
| Gênero | Jack |
| Classificação IP | Não classificado |
| Impedância | 50 |
Show 13 more specs
| Material do isolador | PTFE |
|---|---|
| Isolado | Não |
| Baixo PIM | Não |
| Qualificado MIL | Não qualificado MIL |
| Não magnético | Não |
| Orientação | Reto |
| Recurso de montagem em painel | Bulkhead - Rear montagem |
| Portas | 1 (Single Port) |
| Categoria de tamanho | Miniature |
| Temperatura (máx °C) | 165 |
| Temperatura (mín °C) | -65 |
| Estilo de terminação | cabo - crimpagem |
| Direção de rosca | padrão |
Descrição
Dados de referência atuais para 031-6877: 50 · 8. A impedância está listada como 50. Se esse parâmetro for crítico, confirme-o novamente no RFQ. A frequência está listada como 8. O limite real de operação ainda depende do conjunto, do par de acoplamento e do contexto de aplicação. Para projetos de alta frequência, inclua o desenho, o caminho do cabo e os requisitos críticos no primeiro RFQ. Se a montagem estiver ausente aqui, confirme-a pelo desenho ou pelo requisito de acoplamento. O material está listado como Latão. Isso ajuda na revisão, mas não substitui a confirmação completa da estrutura do projeto. O catálogo também lista um valor de vedação ou proteção de Não classificado. Compare isso com o requisito real de ambiente no RFQ. Use esta página para pré-seleção antes do RFQ, não como aprovação final.
Use esta página para filtrar antes do RFQ. A rota de fornecimento e a produção sob medida MOQ 200+ são confirmadas após revisão do desenho/especificação/BOM.
Conectores similares
Você também pode se interessar por estes modelos:
R414504000
Attenuators - Interconnects ATT TNC 4DB 12,4 GHz 2W
PE3C1994
Reverse Polarity TNC Plug to Reverse Polarity TNC Jack Low Loss Cable Using LMR-195 Coax
122394
TNC reto crimpagem plugue RG-8 RG-213 RG-225 50 Ω
PT1951.5NTHS
RF Conjunto de cabo CASSY, A195, NM, TNC M
LCCA30457-FT3
L-com N female bulkhead to TNC male right angle cable assembly using LC141TB coax, 3 FT is available for same day shipping from our facility. This high quality N cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30457-FT3 N cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF coaxial cable assemblies are built with N bulkhead connection on one end and right angle TNC connection on the other. This N to right angle TNC cable from L-com has a female to male gender combination. Our N female to TNC male coaxial assembly part number LCCA30457-FT3 can also be known as N jack to right angle TNC plug cable assembly when using alternate gender names. N jack to TNC plug cable assembly LCCA30457-FT3 is manufactured with a formable coax. These formable N to TNC cable assemblies use LC141TB coax and are single shielded. L-com single shielded N female bulkhead to TNC male right angle cable assembly using LC141TB coax, 3 FT is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these N to TNC F/M cables is 6 GHz. Technical performance specifications on these 6 GHz N femalebulkhead to TNC right angle male cables are located on the LCCA30457-FT3 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a right angle TNC male to N female bulkhead cable assembly because it can be used in the opposite direction.N female bulkhead to TNC male right angle cable assembly using LC141TB coax, 3 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our N to right angle TNC cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our N female bulkhead to TNC male right angle cable assembly using LC141TB coax, 3 FT.
LCCA30021-FT1
L-com low loss N male to TNC male cable assembly with heavy duty heat shrink boot using LL142 coax, 1 FT is available for same day shipping from our facility. This high quality N cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30021-FT1 N cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF low loss coaxial cable assemblies are built with N connection on one end and TNC connection on the other. This low loss N to TNC cable from L-com has a male to male gender combination. Our N male to TNC male coaxial assembly part number LCCA30021-FT1 can also be known as low loss N plug to TNC plug cable assembly when using alternate gender names. N plug to TNC plug cable assembly LCCA30021-FT1 is manufactured with a flexible coax. These flexible N to TNC cable assemblies use LL142 coax and are triple shielded. L-com triple shielded low loss N male to TNC male cable assembly with heavy duty heat shrink boot using LL142 coax, 1 FT is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these N to TNC M/M cables is 18 GHz. Technical performance specifications on these 18 GHz N male to TNC male cables are located on the LCCA30021-FT1 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a low loss TNC male to N male cable assembly because it can be used in the opposite direction.Low loss N male to TNC male cable assembly with heavy duty heat shrink boot using LL142 coax, 1 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our N to TNC cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our low loss N male to TNC male cable assembly with heavy duty heat shrink boot using LL142 coax, 1 FT.
Busca por MPN Suporta correspondência exata, por prefixo e parcial. ⌄
Isenção de responsabilidade
A Cstone é uma fábrica profissional, não uma empresa comercial, especializada em conectores RF e coaxiais, adaptadores e conjuntos de cabos, incluindo N-type, BNC, SMA, SMP, SSMB e MMCX. Fabricamos conectores conforme desenhos 2D ou amostras; compatibilidade, MOQ, prazo e detalhes de produção são confirmados no RFQ. A Cstone Technology não é afiliada às marcas originais. Nomes de fabricantes, marcas registradas, símbolos e números de peça são usados apenas para identificação e referência cruzada. As marcas registradas permanecem propriedade de seus respectivos donos. A adequação final é confirmada por revisão de desenho/especificação durante o RFQ.