Szczegóły produktu
Low PIM 7/16 DIN Male to 4.3-10 Male Adapter
Numer części (MPN)
Impedancja
50 Ohm
Częstotliwość
DC
Interfejs
7/16 DIN
niestandardowy kabel RF z rysunku dla sourcingu produkcyjnego
niestandardowy kabel RF z rysunku zorientowane na produkcję, z review kompatybilności, wskazówkami MOQ i wsparciem cost-down sourcing.
Co przygotować przed RFQ Jasne dane wejściowe ograniczają domysły i przyspieszają odpowiedź. ⌄
- • Udostępnij referencyjny MPN, część współpracującą lub markę źródłową, jeśli ma to znaczenie dla weryfikacji.
- • Dodaj BOM, podział ilościowy i roczne zapotrzebowanie, jeśli projekt wykracza poza prototyp.
- • Dołącz rysunek, kartę danych lub kluczowe wymagania dotyczące impedancji, częstotliwości, montażu i powłoki.
Obraz
Kliknij, aby powiększyć.
Specifications
| Interfejs | Adapters |
|---|---|
| Interfejs | 7/16 DIN |
| Interfejs | 4.3-10 |
| Impedancja | 50 Ohm |
| Impedancja | 50 Ohm |
| Częstotliwość (maks.) | DC |
| Częstotliwość (maks.) | 6 GHz |
| Płeć | Male |
| Płeć | Male |
| Adapter Body Style | Straight |
| Connector Body Material 1 | Brass |
| Connector Body Material 2 | Brass |
Show 7 more specs
| Connector Body Plating 1 | Tri-Metal |
|---|---|
| Connector Body Plating 2 | Tri-Metal |
| Connector Polarity 1 | Standard |
| Connector Polarity 2 | Standard |
| Montaż | None |
| Montaż | None |
| Category | Adapters |
Opis
Aktualne dane referencyjne dla PE91468: 7/16 DIN · 50 Ohm · DC. Impedancja jest podana jako 50 Ohm. Jeśli to parametr krytyczny, potwierdź go ponownie w RFQ. Częstotliwość jest podana jako DC. Rzeczywisty limit pracy zależy od zespołu, elementu współpracującego i warunków zastosowania. Jeśli brak tu danych montażu, potwierdź je z rysunku lub wymagań połączenia. Materiał jest podany jako Brass. Pomaga to w weryfikacji, ale nie zastępuje potwierdzenia pełnej konstrukcji projektu. Ta strona służy do wstępnego wyboru przed RFQ, a nie jako ostateczne zatwierdzenie.
Użyj tej strony do wstępnej selekcji przed RFQ. Ścieżka dostaw i produkcja na zamówienie MOQ 200+ są potwierdzane po przeglądzie rysunku/specyfikacji/BOM.
Podobne złącza
Mogą Cię też zainteresować te modele:
85114006
The phase invariant MINIBEND CTR line of cable assemblies maintains the bend-to-the-end solderless connector termination technology and introduces industry-leading phase versus temperature performance with an absolute phase change of <300 ppm over a temperature range of -50°C to +125°C.
FMCA2507
Low PIM 7/16 DIN Male to N Female Bulkhead Cable TFT-5G-402 Coax Using Times Microwave Components
Telegartner: Connection according to DIN 41 622
Telegartner: Connection according to DIN 41 622, Asymmetrical Contact Configuration, male connector A 20 a=83; b=74; c=15; d=14; e=68 solder terminals, 20-way (packed per 10)
LCCA30189-FT2
L-com's LCCA30189-FT2 is a low loss 4.3-10 male to 4.3-10 male cable assembly using LMR-400 coax, 2 FT with Times Microwave components and ships same-day. The LMR-400 coax of this 4.3-10 cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 4.3-10 to 4.3-10 cable assembly has a male to male gender configuration with flexible LMR-400 series coax and operates to 6 GHz. The double shield of this 4.3-10 cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 4.3-10 male to 4.3-10 male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30189-FT2 L-com Low Loss 4.3-10 Male to 4.3-10 Male Cable Assembly using LMR-400 Coax, 2 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
LCCA30220-FT1
L-com's LCCA30220-FT1 is a low loss N male to N male right angle cable assembly using LMR-600-DB coax, 1 FT with Times Microwave components and ships same-day. The LMR-600-DB coax of this N cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to N cable assembly has a male to male gender configuration with flexible LMR-600-DB series coax and operates to 5.8 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. This right angle N cable interface on the LMR-600-DB coax allows for easier connections in tight spaces. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30220-FT1 L-com Low Loss N Male to N Male Right Angle Cable Assembly using LMR-600-DB Coax, 1 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
FMCA2474
Low PIM 4.1/9.5 Mini DIN Female to N Male Cable TFT-5G-402 Coax Using Times Microwave Components
Wyszukiwanie MPN Obsługuje dopasowanie dokładne, prefiksowe i częściowe. ⌄
Zastrzeżenie
Cstone to profesjonalna fabryka, a nie firma handlowa, specjalizująca się w złączach RF i koncentrycznych, adapterach oraz zespołach kablowych, w tym N-type, BNC, SMA, SMP, SSMB i MMCX. Produkujemy złącza według rysunków 2D lub próbek; dopasowanie, MOQ, termin i szczegóły produkcji potwierdzamy w RFQ. Cstone Technology nie jest powiązana z oryginalnymi markami. Nazwy producentów, znaki towarowe, symbole i numery części są używane wyłącznie do identyfikacji i odniesień krzyżowych. Znaki towarowe pozostają własnością ich odpowiednich właścicieli. Ostateczna przydatność jest potwierdzana na podstawie przeglądu rysunku/specyfikacji podczas RFQ.