Szczegóły produktu
7 / 16 DIN męski złącze zacisk / Non-lut styk Attachment dla PE-C240, RG8X, .240 in, LMR-240, LMR-240-DB, LMR-240-UF
Numer części (MPN)
Interfejs
PE-C240
niestandardowy kabel RF z rysunku dla sourcingu produkcyjnego
niestandardowy kabel RF z rysunku zorientowane na produkcję, z review kompatybilności, wskazówkami MOQ i wsparciem cost-down sourcing.
Co przygotować przed RFQ Jasne dane wejściowe ograniczają domysły i przyspieszają odpowiedź. ⌄
- • Udostępnij referencyjny MPN, część współpracującą lub markę źródłową, jeśli ma to znaczenie dla weryfikacji.
- • Dodaj BOM, podział ilościowy i roczne zapotrzebowanie, jeśli projekt wykracza poza prototyp.
- • Dołącz rysunek, kartę danych lub kluczowe wymagania dotyczące impedancji, częstotliwości, montażu i powłoki.
Obraz
Kliknij, aby powiększyć.
Specifications
| Interfejs | PE-C240 |
|---|---|
| Interfejs | RG8X |
| Interfejs | .240 in |
| Interfejs | LMR-240 |
| Interfejs | LMR-240-DB |
| Interfejs | LMR-240-UF |
| Polaryzacja | standardowy |
| złącze seria | 7 / 16 DIN |
| złącze płeć | Męski |
| Impedancja | 50 Ohm |
| Styl korpusu | Proste |
| Attachment Method | zacisk / Non-lut styk |
Show 6 more specs
| montaż Method | None |
|---|---|
| Minimalna częstotliwość | DC |
| Maksymalna częstotliwość | 6 GHz |
| Typ produktu | Złącza |
| Category | Złącza |
| Orientacja | Proste |
Opis
Aktualne dane referencyjne dla PE44994: PE-C240. Jeśli brak tu danych montażu, potwierdź je z rysunku lub wymagań połączenia. Ta strona służy do wstępnego wyboru przed RFQ, a nie jako ostateczne zatwierdzenie.
Użyj tej strony do wstępnej selekcji przed RFQ. Ścieżka dostaw i produkcja na zamówienie MOQ 200+ są potwierdzane po przeglądzie rysunku/specyfikacji/BOM.
Podobne złącza
Mogą Cię też zainteresować te modele:
LCCA30220-FT6
L-com's LCCA30220-FT6 is a low loss N męski do N męski Kątowe Zespół kablowy using LMR-600-DB coax, 6 FT z Times Microwave components i ships same-day. The LMR-600-DB coax of this N kabel uses the PE (F) dielectric z a VoP of 87%, resulting in very low insertion loss compared do solid dielectrics. These flexible RF Zespół kablowy are ideal dla applications where flexure is required. Our L-com N do N Zespół kablowy has a męski do męski płeć configuration z flexible LMR-600-DB seria coax i operates do 5.8 GHz. The double shield of this N kabel is layered by tinned miedź braid over aluminium tape providing shielding effectiveness greater than 90dB. This Kątowe N kabel interface on the LMR-600-DB coax allows dla easier connections in tight spaces. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N męski do N męski kabel, along z the rest of L-com's other RF zespoły, can also be built i shipped same day. Other available RF Zespół kablowy value added services from L-com include złącze orientation or clocking, heat shrink booting i custom labeling. RF testing can also be performed do document the electrical performance of your Zespół kablowy. styk a sales representative dla testing or custom RF kabel quotes. Part number LCCA30220-FT6 L-com Low Loss N męski do N męski Kątowe Zespół kablowy using LMR-600-DB Coax, 6 FT z Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) i dimensions below.
NXTJ-NJ
The NXTJ-NJ is an In / Between seria adaptery . This złącze is suitable dla various wysoka-frequency applications. It features a impedance 50Ω, operates up do 6 GHz, i has a rated voltage of AC 500V, ensures a wysoka insulation resistance (5000MΩ(Min.) at DC 500V), a low styk resistance (2.5 mΩ(Max.), i an excellent V.S.W.R 1.15(Max.) at DC~3 GHz, 1.2(Max.) at 3~6 GHz. Withstanding temperatures from -45 do +85°C. The styk is made of beryl miedź / srebro Plating, while the body is mosiądz / Ternary Plating. We can customize our products dla you. We offer total customization, including changes do a product's shape, length, material, surface treatment, i packaging. Available from 1 piece dla in-stock items.
LC3MSA00604-60
The L-com LC3MSA00604-60 MIL-STD-1553 flexible RF Zespół kablowy is perfect dla applications that need tight bends i flexible kabel. This TRB 2-slot do blunt cut Zespół kablowy is wtyk do blunt cut i made of 78 Ω flexible TWCH-78-2-LC twinax. Our 78 Ω Zespół kablowy is available z a HF POF jacket i a miedź inner conductor z srebro plating. We offer a blue, 0.57-inch OD TRB 2-slot do blunt cut kabel that operates at 500 MHz.This blue RF Zespół kablowy is the most commonly utilized Zespół kablowy in wide connectivity applications such as bus couplers, avionics control boxes, i bus relay. L-com's LC3MSA00604-60 MIL-STD-1553 flexible RF Zespół kablowy is available z PE dielectric. Our TRB 2-slot wtyk do blunt cut kabel has bayonet coupling złącza made of mosiądz z nikiel plating. This RF flexible TWCH-78-2-LC twinax kabel operates between -30 i 80 degrees Celsius.L-com has one of the largest in-stock selections of MIL-STD-1553 flexible RF Zespół kablowy z same-day shipment dla domestic i international orders. We are a global leader of wired i wireless connectivity products, offering a wide range of solutions across many key industries, including electronics, medical, industrial automation, military, i telecommunication. dla further information on similar products, our expert technical support i trained sales team can get you the perfect TRB 2-slot wtyk do blunt cut kabel as per your requirements.
7/16P-NP
The 7 / 16P-NP is an In / Between seria adaptery . This złącze is suitable dla various wysoka-frequency applications. It features a impedance 50Ω, i has a rated voltage of AC 1kV max. at 50 Hz, ensures a wysoka insulation resistance (5GΩ(Min.) at DC 500V), a low styk resistance (1.5 mΩ(Max.), i an excellent V.S.W.R 1.2(Max.) at DC~6 GHz. Withstanding temperatures from -45 do +85°C. The styk is made of mosiądz / srebro Plating, while the body is mosiądz / Ternary Plating. We can customize our products dla you. We offer total customization, including changes do a product's shape, length, material, surface treatment, i packaging. Available from 1 piece dla in-stock items.
22511925
Sucoform hand-formable microwave cables have a tin-soaked copper braid for the outer conductor, giving them outstanding hand-formability and a distinct mechanical advanatage over semi-rigid cables
PE3C6181
Plenum 7 / 16 DIN męski do 7 / 16 DIN męski Low PIM kabel Using SPP-250-LLPL Coax Using Times Microwave Parts
Wyszukiwanie MPN Obsługuje dopasowanie dokładne, prefiksowe i częściowe. ⌄
Zastrzeżenie
Cstone to profesjonalna fabryka, a nie firma handlowa, specjalizująca się w złączach RF i koncentrycznych, adapterach oraz zespołach kablowych, w tym N-type, BNC, SMA, SMP, SSMB i MMCX. Produkujemy złącza według rysunków 2D lub próbek; dopasowanie, MOQ, termin i szczegóły produkcji potwierdzamy w RFQ. Cstone Technology nie jest powiązana z oryginalnymi markami. Nazwy producentów, znaki towarowe, symbole i numery części są używane wyłącznie do identyfikacji i odniesień krzyżowych. Znaki towarowe pozostają własnością ich odpowiednich właścicieli. Ostateczna przydatność jest potwierdzana na podstawie przeglądu rysunku/specyfikacji podczas RFQ.