Szczegóły produktu
4.3-10 Male to 7/16 DIN Male Right Angle Low PIM Cable Using TFT-402 Coax Using Times Microwave Components
Numer części (MPN)
Impedancja
50 Ohm
Interfejs
4.3-10
niestandardowy kabel RF z rysunku dla sourcingu produkcyjnego
niestandardowy kabel RF z rysunku zorientowane na produkcję, z review kompatybilności, wskazówkami MOQ i wsparciem cost-down sourcing.
Co przygotować przed RFQ Jasne dane wejściowe ograniczają domysły i przyspieszają odpowiedź. ⌄
- • Udostępnij referencyjny MPN, część współpracującą lub markę źródłową, jeśli ma to znaczenie dla weryfikacji.
- • Dodaj BOM, podział ilościowy i roczne zapotrzebowanie, jeśli projekt wykracza poza prototyp.
- • Dołącz rysunek, kartę danych lub kluczowe wymagania dotyczące impedancji, częstotliwości, montażu i powłoki.
Obraz
Kliknij, aby powiększyć.
Specifications
| Interfejs | Cable Assemblies |
|---|---|
| Interfejs | TFT-402 |
| Interfejs | 4.3-10 |
| Interfejs | 7/16 DIN |
| Impedancja | 50 Ohm |
| Impedancja | 50 Ohm |
| Impedancja | 50 Ohm |
| Płeć | Male |
| Płeć | Male |
| Orientacja | Straight |
| Orientacja | Right Angle |
| Connector Polarity 1 | Standard |
Show 5 more specs
| Montaż | None |
|---|---|
| Connector Polarity 2 | Standard |
| Montaż | None |
| Typ kabla | TFT-402 |
| Category | Cable Assemblies |
Opis
Aktualne dane referencyjne dla PE3C8248: 4.3-10 · 50 Ohm · Straight. Katalog podaje konfigurację jako: Straight. Impedancja jest podana jako 50 Ohm. Jeśli to parametr krytyczny, potwierdź go ponownie w RFQ. Jeśli brak tu danych montażu, potwierdź je z rysunku lub wymagań połączenia. Ta strona służy do wstępnego wyboru przed RFQ, a nie jako ostateczne zatwierdzenie.
Użyj tej strony do wstępnej selekcji przed RFQ. Ścieżka dostaw i produkcja na zamówienie MOQ 200+ są potwierdzane po przeglądzie rysunku/specyfikacji/BOM.
Podobne złącza
Mogą Cię też zainteresować te modele:
LCCA30218-FT1
L-com's LCCA30218-FT1 is a low loss 4.3-10 male to 4.3-10 male cable assembly using LMR-600-DB coax, 1 FT with Times Microwave components and ships same-day. The LMR-600-DB coax of this 4.3-10 cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 4.3-10 to 4.3-10 cable assembly has a male to male gender configuration with flexible LMR-600-DB series coax and operates to 5.8 GHz. The double shield of this 4.3-10 cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 4.3-10 male to 4.3-10 male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30218-FT1 L-com Low Loss 4.3-10 Male to 4.3-10 Male Cable Assembly using LMR-600-DB Coax, 1 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
L717SDE09PACCH4R
Standardowe złącza D-Sub D-SUB, Stamped Signal 3A, Kątowe PCB Przewlekane, FP=1.2 mm (.0.047in), 9 pin, Flash złoto, Bright cyna Shell+Grounding Dimples, 4-40 Rear Insert, Ground Tab z Boardlock
85184491
MINI250™H is for payload integration cabling, helping transmit antenna signals while providing the ability to complete long runs between cable subsystems. It is a significant step-function and low-loss leader in the mold of the MINI141™H cable.
282116-75
Złącza RF / Złącza koncentryczne 1.0 / 2.3 DIN prosty gniazdo 75 Ω
LCCA30202-FT5
L-com's LCCA30202-FT5 is a low loss N male to N male cable assembly using LMR-400-DB coax, 5 FT with Times Microwave components and ships same-day. The LMR-400-DB coax of this N cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to N cable assembly has a male to male gender configuration with flexible LMR-400-DB series coax and operates to 6 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30202-FT5 L-com Low Loss N Male to N Male Cable Assembly using LMR-400-DB Coax, 5 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
PE3207LF
7/16 DIN Male to N Male Cable Using RG58 Coax , LF Solder
Wyszukiwanie MPN Obsługuje dopasowanie dokładne, prefiksowe i częściowe. ⌄
Zastrzeżenie
Nazwy producentów, znaki towarowe, symbole i numery części są używane wyłącznie do identyfikacji i odniesień krzyżowych. Cstone Technology to chiński partner eksportowy oferujący kompatybilne alternatywy i nie jest powiązany z oryginalnymi markami. Znaki towarowe pozostają własnością ich odpowiednich właścicieli. Ostateczna przydatność jest potwierdzana na podstawie przeglądu rysunku/specyfikacji podczas RFQ.