Szczegóły produktu
Flexible 0.405 in 50 Ohm
Numer części (MPN)
Impedancja
50 Ohm
Częstotliwość
4.1 dB
niestandardowy kabel RF z rysunku dla sourcingu produkcyjnego
niestandardowy kabel RF z rysunku zorientowane na produkcję, z review kompatybilności, wskazówkami MOQ i wsparciem cost-down sourcing.
Co przygotować przed RFQ Jasne dane wejściowe ograniczają domysły i przyspieszają odpowiedź. ⌄
- • Udostępnij referencyjny MPN, część współpracującą lub markę źródłową, jeśli ma to znaczenie dla weryfikacji.
- • Dodaj BOM, podział ilościowy i roczne zapotrzebowanie, jeśli projekt wykracza poza prototyp.
- • Dołącz rysunek, kartę danych lub kluczowe wymagania dotyczące impedancji, częstotliwości, montażu i powłoki.
Obraz
Kliknij, aby powiększyć.
Specifications
| Interfejs | Coaxial Bulk Cable |
|---|---|
| Interfejs | Flexible |
| Interfejs | Foam PE |
| Interfejs | Solid |
| Interfejs | Coax |
| Impedancja | 50 Ohm |
| Częstotliwość (maks.) | 8 GHz |
| Generic Name | LMR-LW400 |
| Velocity of Propagation | 84 % |
| Płeć | 0.405 in |
| Płeć | PE |
| No. of Shields | 2 |
Show 9 more specs
| Częstotliwość (maks.) | 4.1 dB |
|---|---|
| RF Shielding | 90 dB |
| Max Operating Temperature | 85 deg C |
| Inner Conductor, Number of Strands | 1 |
| Minimum Bend Radius, One Time | 1 in |
| Minimum Bend Radius, Repeated | 4 in |
| Category | Coaxial Bulk Cable |
| Application | Antenna Installations; RF Test Systems; General Purpose RF Interconnect; Laboratory Applications |
| Product Features | PE Jacket; Max Operating Temperature +85°C; Min Install Bend Radius of 1 inches; Phase Velocity 84% VoP; Max Operating Frequency of 5.8 GHz; Light Weight Coax |
Opis
Aktualne dane referencyjne dla LMR-LW400-LC: 50 Ohm · 4.1 dB. Impedancja jest podana jako 50 Ohm. Jeśli to parametr krytyczny, potwierdź go ponownie w RFQ. Częstotliwość jest podana jako 4.1 dB. Rzeczywisty limit pracy zależy od zespołu, elementu współpracującego i warunków zastosowania. Jeśli brak tu danych montażu, potwierdź je z rysunku lub wymagań połączenia. Materiał jest podany jako PE. Pomaga to w weryfikacji, ale nie zastępuje potwierdzenia pełnej konstrukcji projektu. Ta strona służy do wstępnego wyboru przed RFQ, a nie jako ostateczne zatwierdzenie.
Użyj tej strony do wstępnej selekcji przed RFQ. Ścieżka dostaw i produkcja na zamówienie MOQ 200+ są potwierdzane po przeglądzie rysunku/specyfikacji/BOM.
Podobne złącza
Mogą Cię też zainteresować te modele:
NA-PJ-10
The NA-PJ-10 is an N Attenuator. This connector is suitable for various high-frequency applications. It features a impedance 50Ω, operates up to 4 GHz, and an excellent V.S.W.R 1.15(Max.) at DC~2 GHz, 1.2(Max.) at DC~4 GHz. Withstanding temperatures from -20 to +65°C. The contact is made of Brass/Beryllium Copper/Gold Plating, while the body is Brass/Nickel Plating. Rated Power is 2W.Attenuation is 10±0.5dB up to 2GHz, 10±1.0dB up to 4GHz. We can customize our products for you. We offer total customization, including changes to a product's shape, length, material, surface treatment, and packaging. Available from 1 piece for in-stock items.
LC3MSA00438-60
The L-com LC3MSA00438-60 MIL-STD-1553 flexible RF cable assembly is perfect for applications that need tight bends and flexible cable. This TRB 3-slot to TRB 3-lug cable assembly is plug to jack and made of 78 ohm flexible M17-176-00002-LC twinax. Our 78 Ohm cable assembly is available with a PFA jacket and a copper inner conductor with silver plating. We offer a blue, 0.57-inch OD TRB 3-slot to TRB 3-lug cable that operates at 10 MHz.This blue RF cable assembly is the most commonly utilized cable assembly in wide connectivity applications such as bus couplers, avionics control boxes, and bus relay. L-com's LC3MSA00438-60 MIL-STD-1553 flexible RF cable assembly is available with PTFE dielectric. Our TRB 3-slot plug to TRB 3-lug jack cable has bayonet coupling connectors made of brass with nickel plating. This RF flexible M17-176-00002-LC twinax cable operates between -55 and 200 degrees Celsius.L-com has one of the largest in-stock selections of MIL-STD-1553 flexible RF cable assembly with same-day shipment for domestic and international orders. We are a global leader of wired and wireless connectivity products, offering a wide range of solutions across many key industries, including electronics, medical, industrial automation, military, and telecommunication. For further information on similar products, our expert technical support and trained sales team can get you the perfect TRB 3-slot plug to TRB 3-lug jack cable as per your requirements.
LCCA30160-FT1.5
L-com's LCCA30160-FT1.5 is a low loss N male right angle to N male right angle cable assembly using LMR-195-FR coax, 1.5 FT with Times Microwave components and ships same-day. The LMR-195-FR coax of this N cable uses the PE dielectric with a VoP of 76%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to N cable assembly has a male to male gender configuration with flexible LMR-195-FR series coax and operates to 5.8 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. This right angle N cable interface on the LMR-195-FR coax allows for easier connections in tight spaces. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30160-FT1.5 L-com Low Loss N Male Right Angle to N Male Right Angle Cable Assembly using LMR-195-FR Coax, 1.5 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
L777TWA3W3PP3YRM84
Złącza D-Sub z mieszanymi stykami D-SUB, Machined Hybrid, 3W3, Power (40A) styki Only, pin, prosty PCB Przewlekane, Bright cyna Shell+Grounding Dimples, 0.76 m (30 in) Power, 4-40 Fixed Front Screwlock z Standoff i Boardlock
L717SDE09PA0CH4RN
Standardowe złącza D-Sub D-SUB, Stamped Signal 3A, Kątowe PCB Przewlekane, FP=2.6 mm (.102in), Row Pitch 1.0 mm, 9 pin, Flash złoto, Bright cyna Shell+Grounding Dimples, nikiel Shell+Grounding Dimples, 4-40 Rear Insert, Ground Tab z Boardlock
PE3C8214
4.1/9.5 Mini DIN Female to 4.3-10 Male Low PIM Cable Using TFT-402 Coax Using Times Microwave Components
Wyszukiwanie MPN Obsługuje dopasowanie dokładne, prefiksowe i częściowe. ⌄
Zastrzeżenie
Cstone to profesjonalna fabryka, a nie firma handlowa, specjalizująca się w złączach RF i koncentrycznych, adapterach oraz zespołach kablowych, w tym N-type, BNC, SMA, SMP, SSMB i MMCX. Produkujemy złącza według rysunków 2D lub próbek; dopasowanie, MOQ, termin i szczegóły produkcji potwierdzamy w RFQ. Cstone Technology nie jest powiązana z oryginalnymi markami. Nazwy producentów, znaki towarowe, symbole i numery części są używane wyłącznie do identyfikacji i odniesień krzyżowych. Znaki towarowe pozostają własnością ich odpowiednich właścicieli. Ostateczna przydatność jest potwierdzana na podstawie przeglądu rysunku/specyfikacji podczas RFQ.